การแนะนำ
The Fermax 3610 Memokey Reader is an advanced access control device designed to provide secure and convenient entry. This system supports various keyless entry options, including keypad codes, access cards, and can be integrated with existing security systems. Its scalable design makes it suitable for a range of building sizes and security requirements, ensuring optimal performance through professional installation.
สินค้าเกินview
ภาพ: ด้านหน้า view of the Fermax 3610 Memokey Reader, showing a metallic and black housing with a numeric keypad (0-9) and two additional buttons labeled 'A' and 'B'. The 'FERMAX' logo is visible at the top.
The Fermax 3610 features a robust design, combining metallic, plastic, and polycarbonate materials for durability. It operates on a 100V power supply and is designed for desktop compatibility, offering a reliable solution for access management.
การตั้งค่า
Proper installation is crucial for the optimal performance of the Fermax 3610 Memokey Reader. It is recommended that setup be performed by a qualified professional to ensure correct wiring and system integration.
1. การเชื่อมต่อไฟฟ้า
- Ensure the power source is off before connecting the device.
- Connect the device to a 100V power supply. The unit is designed for hand-powered operation, implying it draws power from a connected system or dedicated power supply unit.
- Verify all power connections are secure to prevent electrical hazards.
2. การรวมระบบ
- The device is designed for integration with existing security and access control systems. Refer to your specific system's documentation for detailed integration steps.
- Utilize the USB 2.0 hardware interface for data communication with compatible desktop systems.
3. Mounting (if applicable)
- While primarily a desktop device, ensure it is placed on a stable, flat surface.
- Avoid locations exposed to extreme temperatures, direct sunlight, or excessive moisture.
การดำเนินงาน
The Fermax 3610 Memokey Reader offers multiple methods for access control.
1. การป้อนข้อมูลด้วยแป้นพิมพ์
- To gain access using a code, enter your pre-programmed numeric code using the keypad (0-9).
- Press the designated confirmation button (e.g., 'A' or 'B' or a specific sequence) after entering the code, as per system configuration.
- The system will indicate successful access (e.g., a green light or an audible signal).
2. การเข้าถึงบัตร
- If configured for card access, present your authorized access card to the reader's designated area.
- Ensure the card is held steadily until the system registers it.
- Successful card reads will be indicated by the system.
3. Biometric Access (if integrated)
- For systems integrated with biometric features, follow the on-screen or system prompts to provide your biometric data (e.g., fingerprint scan).
- Ensure proper placement and clean contact for accurate readings.
4. Code Management
- The device supports up to 100 codes. Code programming and management are typically done through the connected access control system's software interface.
- Consult your system administrator or the specific software manual for instructions on adding, modifying, or deleting access codes.
การซ่อมบำรุง
Regular maintenance ensures the longevity and reliable operation of your Fermax 3610 Memokey Reader.
1. การทำความสะอาด
- Use a soft, dry, lint-free cloth to clean the exterior surfaces.
- สำหรับรอยฝังแน่น ให้ลบออกเล็กน้อยampen the cloth with water. Avoid abrasive cleaners, solvents, or excessive moisture.
- ห้ามฉีดน้ำยาทำความสะอาดลงบนอุปกรณ์โดยตรง
2. การพิจารณาด้านสิ่งแวดล้อม
- Keep the device away from direct sunlight, heat sources, and areas with high humidity.
- Ensure proper ventilation if the device is enclosed within a cabinet or housing.
3. การอัปเดตซอฟต์แวร์
- Periodically check for firmware or software updates for the connected access control system. Updates can improve performance, add features, or address security vulnerabilities.
การแก้ไขปัญหา
This section provides solutions to common issues you might encounter with your Fermax 3610 Memokey Reader.
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Device not responding to input. | No power; loose connection; system error. | Check power supply and connections. Verify the connected system is operational. Restart the system if necessary. |
| รหัสผ่านใช้งานไม่ได้ | Incorrect code entered; code not programmed; code expired. | Ensure the correct code is entered. Contact system administrator to verify code programming and validity. |
| Access card not recognized. | Card not authorized; card damaged; incorrect reading technique. | Ensure the card is authorized. Try a different authorized card. Present the card steadily to the reader. |
| System integration issues. | Incorrect wiring; software configuration error. | Consult the installation manual for wiring diagrams. Verify software settings. Professional assistance may be required. |
If the issue persists after attempting these solutions, please contact Fermax customer support or your authorized installer.
ข้อมูลจำเพาะ
- ชื่อรุ่น : Memokey City Classic
- หมายเลขรุ่น: 8424299036106
- ผู้ผลิต: เฟอร์แม็กซ์
- วัสดุ: Metallic, Plastic, Polycarbonate
- สี: หลากสี
- แหล่งจ่ายไฟ: Hand-powered (requires 100V input)
- เล่มที่tage: 100โวลต์
- พลังงานไฟฟ้า: 100วัตต์
- น้ำหนักผลิตภัณฑ์: 145 กรัม
- เทคโนโลยีการเชื่อมต่อ: ยูเอสบี
- อินเทอร์เฟซฮาร์ดแวร์: ยูเอสบี 2.0
- อุปกรณ์ที่รองรับ: เดสก์ท็อป
- คุณสมบัติพิเศษ: Distinctive details, supports 100 codes
การรับประกันและการสนับสนุน
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Fermax website. Professional installation services are available to ensure optimal performance and adherence to warranty terms.
Fermax Official Webเว็บไซต์: www.fermax.com
