การแนะนำ
This instruction manual provides essential information for the proper installation, operation, and maintenance of your Geberit 154.336.FW.1 Wall Mounted Siphon Cover. Please read this manual thoroughly before beginning installation or use to ensure safe and efficient operation. Retain this manual for future reference.
ข้อมูลด้านความปลอดภัย
โปรดปฏิบัติตามคำแนะนำด้านความปลอดภัยต่อไปนี้เพื่อป้องกันการบาดเจ็บและความเสียหายต่อผลิตภัณฑ์:
- ควรสวมใส่อุปกรณ์ป้องกันส่วนบุคคล (PPE) ที่เหมาะสมเสมอในระหว่างการติดตั้ง เช่น ถุงมือและแว่นตาป้องกันดวงตา
- Ensure all water supply lines are shut off before commencing installation.
- หากคุณไม่แน่ใจเกี่ยวกับส่วนใดส่วนหนึ่งของกระบวนการติดตั้ง โปรดปรึกษาผู้เชี่ยวชาญที่มีคุณสมบัติเหมาะสม
- ห้ามดัดแปลงผลิตภัณฑ์ในลักษณะใดๆ เพราะอาจทำให้การรับประกันเป็นโมฆะและส่งผลกระทบต่อความปลอดภัย
- เก็บชิ้นส่วนขนาดเล็กให้พ้นมือเด็กเพื่อป้องกันอันตรายจากการสำลัก
เนื้อหาแพ็คเกจ
ตรวจสอบว่าส่วนประกอบทั้งหมดมีอยู่ก่อนเริ่มการติดตั้ง:
- Geberit 154.336.FW.1 Wall Mounted Siphon Cover (Brushed Stainless Steel)
- Mounting hardware (if applicable, refer to included components list)
- คู่มือการใช้งาน
การติดตั้งและการตั้งค่า
The Geberit 154.336.FW.1 siphon cover is designed for integration with a Geberit shower wall gutter system. Proper installation ensures optimal function and aesthetic appeal.

This diagram illustrates the key dimensions of the Geberit wall mounted siphon cover. The cover measures 32 units in length and 5 units in width, providing essential measurements for installation planning.
ขั้นตอนการติดตั้ง:
- Prepare the Shower Wall Gutter: Ensure the Geberit shower wall gutter system is correctly installed and sealed according to its specific instructions.
- Position the Siphon Cover: Carefully align the stainless steel siphon cover with the opening of the shower wall gutter. The 'Right-sided' design indicates its intended orientation.
- ยึดฝาครอบให้แน่น: If specific mounting hardware is provided, use it to secure the cover firmly in place. The cover is designed to sit flush with the surrounding surface.
- ตรวจสอบความพอดี: Ensure the cover is stable and does not wobble. It should provide a seamless finish to the shower area.
- การทดสอบการระบายน้ำ: After installation, test the shower drainage to confirm proper water flow and ensure no obstructions are present.
การดำเนินการ
The Geberit 154.336.FW.1 Wall Mounted Siphon Cover functions as a decorative and protective element for your shower wall gutter. Once installed, it requires no active operation. Its primary purpose is to cover the siphon mechanism, providing a finished aesthetic while allowing water to drain efficiently into the gutter system.
การบำรุงรักษาและการดูแล
To maintain the appearance and functionality of your stainless steel siphon cover, follow these care instructions:
- การทำความสะอาดปกติ: Clean the stainless steel surface regularly with a soft cloth and a mild, non-abrasive cleaner.
- หลีกเลี่ยงสารเคมีที่รุนแรง: Do not use abrasive cleaners, scouring pads, or strong chemical agents, as these can scratch or damage the stainless steel finish.
- ล้างให้สะอาด: After cleaning, rinse the cover thoroughly with clean water and dry it with a soft cloth to prevent water spots.
- ตรวจสอบเศษซาก: Periodically remove the cover (if designed for easy removal) to inspect and clean any debris from the underlying shower gutter and siphon.
การแก้ไขปัญหา
If you encounter issues with your siphon cover, refer to the following table:
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Cover does not sit flush. | Incorrect installation or obstruction. | Re-check alignment and ensure no debris is preventing a flush fit. Verify the underlying gutter is correctly installed. |
| น้ำไหลช้า. | Obstruction in the shower gutter or siphon. | Remove the cover and clean the shower gutter and siphon thoroughly. |
| Cover appears scratched or dull. | สารหรือวัสดุทำความสะอาดที่มีฤทธิ์กัดกร่อน | Use only soft cloths and mild, non-abrasive cleaners for stainless steel. |
ข้อมูลจำเพาะ
| คุณสมบัติ | รายละเอียด |
|---|---|
| หมายเลขรุ่น | 154.336.FW.1 |
| วัสดุ | สแตนเลส |
| สี | Stainlesssteel (Brushed) |
| สไตล์ | Right-sided |
| ขนาดสินค้า | 11.81 x 7.87 x 15.75 นิ้ว (บรรจุภัณฑ์) |
| น้ำหนักสินค้า | 14.8 ออนซ์ |
| ผู้ผลิต | เกเบอริท |
ข้อมูลการรับประกัน
Geberit products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your region and product, please refer to the official Geberit webเข้าชมเว็บไซต์หรือติดต่อฝ่ายบริการลูกค้า เก็บหลักฐานการซื้อไว้เพื่อใช้ในการเคลมประกัน
การสนับสนุนลูกค้า
If you have any questions, require technical assistance, or need to report an issue with your Geberit product, please visit the official Geberit website for contact information or consult your local distributor. When contacting support, please have your product model number (154.336.FW.1) and purchase details readily available.





