เลอกรองด์ 047681

Legrand 047681 Altis Cabinet External Assembly Kit

คู่มือการใช้งาน

1. บทนำ

The Legrand 047681 Altis Cabinet External Assembly Kit is designed to securely connect Altis series cabinets externally. This kit ensures the structural integrity and maintains the Ingress Protection (IP) rating of the assembled cabinets, supporting significant loads up to 500 kg/m³.

Please read this manual thoroughly before installation and use to ensure proper assembly and safe operation.

2. ข้อมูลด้านความปลอดภัย

3. เนื้อหาบรรจุภัณฑ์

Verify that all the following components are present in your Legrand 047681 kit:

If any items are missing or damaged, please contact your supplier or Legrand customer service immediately.

4. การตั้งค่าและการติดตั้ง

This section outlines the general steps for assembling Altis cabinets using the 047681 kit. Specific cabinet models may have additional requirements; refer to the individual cabinet's manual for detailed instructions.

  1. การตระเตรียม: Ensure the surfaces of the cabinets to be joined are clean, dry, and free from obstructions. Position the cabinets in their final location, ensuring they are level and aligned.
  2. Aligning Cabinets: Use the provided conical pins to precisely align the cabinets. Insert the conical pins into the designated holes on the cabinet frames. This ensures accurate positioning and structural integrity.
  3. Attaching Assembly Elements: Secure the 12 assembly elements to the exterior of the cabinets at the designated connection points. Use appropriate fasteners (not included, refer to cabinet manual) to firmly attach these elements.
  4. Applying Sealing Gasket: Carefully apply the sealing gasket along the joint between the two cabinets. This gasket is crucial for maintaining the IP rating of the cabinets, protecting internal components from dust and moisture.
  5. Securing Retaining Pins: Once the cabinets are aligned and assembly elements are in place, insert the 6 retaining pins to further secure the connection. Ensure these pins are fully engaged and locked.
  6. การตรวจสอบขั้นสุดท้าย: Visually inspect all connections to ensure they are tight and secure. Confirm that the sealing gasket is properly seated along the entire joint.

The assembly process is designed to maintain the IP rating of the cabinets, ensuring continued protection against environmental factors.

5. การใช้งานและการทำงาน

Once properly assembled, the Legrand 047681 kit allows multiple Altis cabinets to function as a single, cohesive unit. The primary functions include:

No specific 'operation' is required for the assembly kit itself after installation; its function is passive, providing structural support and environmental protection.

6. การบำรุงรักษา

The Legrand 047681 assembly kit requires minimal maintenance. Regular inspections are recommended to ensure continued performance and safety.

7 การแก้ไขปัญหา

This section addresses common issues that may arise during or after the installation of the assembly kit.

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
Cabinets are not aligning properly.Conical pins not fully engaged or cabinet surfaces obstructed.Ensure conical pins are inserted correctly. Clear any debris from cabinet surfaces and alignment holes.
Gap visible between joined cabinets.Assembly elements not tightened sufficiently or cabinets not fully pushed together.Retighten assembly elements. Ensure cabinets are flush against each other before final tightening.
IP rating appears compromised (e.g., water ingress).Sealing gasket improperly installed or damaged.Inspect the sealing gasket. Re-seat it correctly or replace if damaged. Ensure all connections are tight.
Kit components appear loose after installation.Fasteners or pins have vibrated loose over time.Periodically check and retighten all assembly elements and retaining pins.

8. ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
หมายเลขรุ่น047681
ผู้ผลิตเลอแกรนด์
วัสดุโลหะ
ความจุในการรับน้ำหนัก500 กก./ม.
ขนาดแพ็คเกจ24.5 x 24 x 11 ซม.
น้ำหนักสินค้า1.55 กก.
รายการในแพ็คเกจ1 (ชุด)
แบตเตอรี่ที่จำเป็นเลขที่
ASINB00DG7907I

9. การรับประกันและการสนับสนุน

For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Legrand webไซต์ เงื่อนไขการรับประกันโดยทั่วไปครอบคลุมถึงข้อบกพร่องในการผลิตเป็นระยะเวลาหนึ่งนับจากวันที่ซื้อ

If you require technical assistance, have questions about installation, or need to report a missing/damaged component, please contact Legrand customer support:

โปรดเตรียมหมายเลขรุ่นผลิตภัณฑ์ (047681) และรายละเอียดการซื้อให้พร้อมเมื่อติดต่อฝ่ายสนับสนุน

เอกสารที่เกี่ยวข้อง - 047681

พรีview ตู้จ่ายไฟโลหะ Legrand XL³ HP 160 - ข้อมูลจำเพาะทางเทคนิค
เอกสารข้อมูลทางเทคนิคสำหรับตู้จ่ายไฟโลหะ Legrand XL³ HP 160 ซึ่งให้รายละเอียดเกี่ยวกับลักษณะทั่วไป ขนาด ข้อมูลจำเพาะทางเทคนิค คุณสมบัติทางไฟฟ้าและทางกล และมาตรฐานการปฏิบัติตามข้อกำหนด
พรีview Legrand KEOR DK R/T 1-2-3 kVA Battery Cabinet: Installation and Maintenance Manual
Comprehensive installation and maintenance manual for the Legrand KEOR DK R/T 1-2-3 kVA battery cabinet. Covers safety, installation procedures, maintenance, technical specifications, and regulatory compliance.
พรีview คู่มือการติดตั้งและคู่มือ Armadio Batterie KEOR DK R/T 1-2-3 kVA Legrand
คู่มือการติดตั้งแบตเตอรี่และคู่มือการติดตั้งแบตเตอรี่ Legrand KEOR DK R/T 1-2-3 kVA รวม requisiti normativi, ขั้นตอนการผ่าตัดและเทคนิคเฉพาะ
พรีview ข้อมูลจำเพาะทางเทคนิคของตู้จ่ายไฟโลหะ Legrand XL³ HP 160
ข้อมูลทางเทคนิคโดยละเอียดสำหรับตู้จ่ายไฟโลหะ Legrand XL³ HP 160 ซึ่งประกอบด้วยคุณสมบัติ ขนาด วัสดุ ข้อกำหนดทางไฟฟ้าและสภาพอากาศ และการปฏิบัติตามมาตรฐานอุตสาหกรรม
พรีview แคตตาล็อกอุปกรณ์โมดูลาร์และแผงจ่ายไฟ Legrand ปี 2025
แคตตาล็อกอุปกรณ์โมดูลาร์และแผงจ่ายไฟของ Legrand ที่ครอบคลุมสำหรับการติดตั้งระบบไฟฟ้าและการกระจายข้อมูล ครอบคลุมทั้งเบรกเกอร์วงจร อุปกรณ์ป้องกันไฟกระชาก อุปกรณ์ป้องกันไฟกระชาก สวิตช์ และแผงจ่ายไฟ ครอบคลุมข้อมูลจำเพาะของผลิตภัณฑ์ รายละเอียดทางเทคนิค และข้อมูลการสั่งซื้อ
พรีview ข้อมูลจำเพาะทางเทคนิคและคู่มือผู้ใช้ของ Legrand Connected Load Shedder
Technical specification and user guide for the Legrand Connected Load Shedder (Cat.No: 4 121 72 - 1 991 20). This device manages single-phase electrical contract limits and avoids excessive consumption by intelligently shedding loads, controllable via the Home + Control app. Includes installation, configuration, and technical data.