คู่มือการใช้งานเครื่องตั้งเวลาอเนกประสงค์ AUTONICS AT11DN-24-240

1. บทนำ

This manual provides essential information for the safe and effective installation, operation, and maintenance of the AUTONICS AT11DN-24-240 Multi-Function Timer. This device is designed for precise timing control in various industrial and commercial applications, offering a wide timing range from 0.05 seconds to 100 hours and operating on 100VAC-240VAC power.

2. ข้อควรระวังเพื่อความปลอดภัย

Read these safety precautions carefully before using the product to ensure proper and safe operation. Failure to follow these instructions may result in electric shock, fire, or product damage.

• ความปลอดภัยทางไฟฟ้า: Ensure all wiring is performed by qualified personnel in accordance with local and national electrical codes. Disconnect power before installation, inspection, or maintenance.
• แหล่งจ่ายไฟ: ตรวจสอบว่าแหล่งจ่ายไฟมีแรงดันไฟtage ตรงกับปริมาณที่ระบุของผลิตภัณฑ์tage range (100VAC-240VAC). Incorrect voltagและอาจทำให้เกิดความเสียหายได้
• สภาพแวดล้อมการติดตั้ง: Install the timer in an environment free from excessive vibration, dust, moisture, corrosive gases, or direct sunlight. Ensure adequate ventilation.
• การเชื่อมต่อเทอร์มินัล: Securely fasten all terminal connections to prevent loose contacts, which can lead to overheating or malfunction.
• ความจุในการรับน้ำหนัก: Do not exceed the specified contact rating (5A resistive load). Overloading can damage the internal relay.

3. สินค้าหมดview

The AUTONICS AT11DN-24-240 is a compact multi-function timer featuring a clear rotary dial for time setting and various indicators for operational status.

Figure 1: Front panel of the AUTONICS AT11DN-24-240 Multi-Function Timer.

This image displays the front panel of the AUTONICS AT11DN-24-240 Multi-Function Timer. Visible elements include the central rotary dial for time setting, marked with a scale from 0 to 10. Above the dial, there are 'POWER' and 'RUN' indicator lights. To the right, an 'OUT' indicator and a 'MODE' selector switch are present. The brand name 'Autonics' is printed at the bottom right of the panel.

3.1. ส่วนประกอบแผงด้านหน้า

• ปุ่มหมุนตั้งเวลา: Rotary dial for setting the desired time value within the selected range.
• ไฟแสดงสถานะเพาเวอร์: Illuminates when power is supplied to the timer.
• ตัวบ่งชี้การวิ่ง: Illuminates during the timing operation.
• ตัวบ่งชี้ OUT: Illuminates when the output relay is activated.
• ตัวเลือกโหมด: Switch to select the desired operating mode (e.g., ON-delay, Interval).

4. การตั้งค่า

4.1. การติดตั้ง

The AT11DN-24-240 timer is designed for panel mounting. Ensure sufficient space for wiring and ventilation. Secure the timer using the provided mounting hardware.

4.2. การเดินสาย

Refer to the wiring diagram printed on the side of the timer or in the detailed product datasheet for specific terminal connections. Common connections include:

• แหล่งจ่ายไฟ (100-240VAC): เชื่อมต่อแหล่งจ่ายไฟหลักเข้ากับขั้วที่กำหนด
• ช่องติดต่อเอาท์พุต: Connect the load to the normally open (NO) and common (COM) terminals of the output relay. Ensure the load current does not exceed 5A resistive.
• Control Input (if applicable): Some modes may utilize external control inputs (e.g., START, RESET). Connect these as per the specific mode's requirements.

Warning: Ensure power is disconnected before performing any wiring.

4.3. การตั้งค่าเริ่มต้น

• การเลือกช่วงเวลา: The timer supports various time ranges (e.g., seconds, minutes, hours). Select the appropriate range using the internal DIP switches or external selector, if present (refer to the detailed product datasheet for specific model configuration).
• การเลือกโหมดการทำงาน: Use the 'MODE' selector switch on the front panel to choose the desired timing function (e.g., ON-delay, OFF-delay, Interval, Flicker).

5. คู่มือการใช้งาน

5.1. การตั้งเวลา

Rotate the central time setting dial to the desired time value. The dial is typically marked with a scale from 0 to 10, representing a percentage of the selected time range. For example, if the range is 10 minutes, setting the dial to '5' would correspond to 5 minutes.

5.2. เปิดเครื่อง

Once wiring and settings are complete, apply power to the timer. The 'POWER' indicator will illuminate.

5.3. Timing Operation

Depending on the selected mode:

• For ON-delay mode, timing begins immediately upon power application or trigger. The 'RUN' indicator will illuminate.
• Upon completion of the set time, the output relay will activate, and the 'OUT' indicator will illuminate.
• For other modes, refer to the specific timing chart in the detailed product datasheet.

6. การบำรุงรักษา

The AUTONICS AT11DN-24-240 timer is designed for long-term, reliable operation with minimal maintenance. However, periodic checks can help ensure optimal performance.

• การทำความสะอาด: Gently wipe the exterior of the timer with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• การตรวจสอบ: Periodically inspect wiring connections for tightness and signs of wear or damage. Check for any unusual sounds or odors during operation.
• พื้นที่จัดเก็บ: If storing the timer, keep it in a dry, dust-free environment within the specified temperature and humidity ranges.

7 การแก้ไขปัญหา

If the timer does not operate as expected, consult the following table before contacting support.

8. ข้อมูลจำเพาะ

Key technical specifications for the AUTONICS AT11DN-24-240 Multi-Function Timer:

9. การรับประกันและการสนับสนุน

AUTONICS products are manufactured under strict quality control standards. For specific warranty terms and conditions, please refer to the warranty information provided with your purchase or visit the official AUTONICS website. For technical assistance, troubleshooting beyond this manual, or repair services, please contact AUTONICS customer support or your authorized distributor.