FlySpark F4 V1 Stack Flight Controller
Мушаххасоти
- Номи маҳсулот:
FlySpark F4 V1 BLS 60A Stack - Хусусиятҳои AI:
Sensor Fusion, PID Autotuning, Adaptive Filtering - Дастгирии нармафзор:
Betaflight, INAV, Ardupilot, EMU-парвоз, SkyBrush - ESC Communication:
BLHeli_S Bluetooth ва USB-C - Пайвастшавӣ:
3-6S LiPo - андоза:
47.8мм(Л) x 47.5мм(В) x 18.3мм(Н) - Монтаж:
30.5 x 30.5 мм бо андозаи 4 мм сӯрохи - Вазн:
34г
Дастурҳои истифодаи маҳсулот
FlySpark F4 V1 Нозири парвоз
Тарҳ:
Refer to the user manual for the layout of the flight controller.
Пайвасти периферӣ:
Connect peripherals as per the provided diagram.
Конфигуратсияи барнома ва FC:
Use the recommended apps and follow the configuration instructions.
Навсозии нармафзори FC:
Connect the flight controller to a PC via USB for firmware updates.
FLYSPARK BLS 60A 4-IN-1 ESC
Тарҳ:
Check the layout guide in the manual for proper installation.
Пайвастшавӣ бо моторҳо ва кабели барқ:
Connect motors and power cables securely.
Конфигуратсияи ESC:
Use the FlySpark app for ESC configuration settings.
Навсозии нармафзори ESC:
Follow the provided steps to update the firmware for ESC.
FlySpark F4 V1 BLS 60A Stack
Мушаххасот ба охир расидview
Баста
- FlySpark F4 V1 Flight Controller x 1
- FlySpark BLS 60A 4-in-1 ESC x 1
- 35V 1000uF конденсатори пасти ESR x 1
- М3 Нейлон чормағз x 4
- Кабели SH 1.0mm 25mm-дарозии 8pin (барои пайвасти FC-ESC) x 1 SH 1.0mm 75mm-дарозии 6pin Кабел* x 1
- M3 * 30mm Инер-шонздаҳкунҷа винтҳо x 4
- Кабели DJI 6pin (80мм) x 1
- Кабели барқии XT60 (100мм) x 1
Диаграммаи пайвасти FC
Дастур ба пайвастҳои FC & ESC
Усули 1:
- Using 8.Pin JST Cable
Усули 2:
Пайвасткунии мустақим
- 8 симро ба 8 лавҳаи ҳар ду канор, мувофиқи таърифҳои дар поён овардашуда пайваст кунед
Мушаххасоти идоракунии парвоз
- Сими 6-паймро истифода баред, ки бо воҳиди ҳавоии O3 меояд
- Сими 6-пайвандаро истифода баред, ки бо FlySpark F4 V1 BLS 60A Stack меояд
F C Firmware update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:
- Use a USB cable to connect the FlySpark F4 VI flight controller to your PC
Open Betaflight I INAV Configurator.
- . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an exampле.
Navigate to Firmware Flashing:
- In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.
Select Target and Flash Firmware:
- Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
- Initiate the firmware flashing process.
Шарҳ:
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be performed using a USB connection to your PC.
Flyspark BLS 60A 4-in-l ESC
Пайвастшавӣ бо моторҳо ва кабели барқ
ESC Specs FlySpark F4 V1 BLS 60A Stack
Навсозии нармафзори ESC
Ин 8-бита 50A ESC бо нармафзори BLHeliS пешакӣ бор карда шудааст, аммо инчунин метавонад ба нармафзори Bluejay насб карда шавад, ки филтркунии RPM ва дастгирии дутарафаи Dshot-ро пешниҳод мекунад. Барои навсозии нармафзори нармафзор ин қадамҳоро иҷро кунед:
- Prepare Your Drone:
Remove all propellers from your drone for safety. - Connect ESC to Flight Controller:
Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly. - Ба компютер пайваст шавед:
Use a USB Type-C cable to connect the flight controller to your computer. - Access Firmware Configuration:
Open the Chrome browser and visit: www.esc-configurator.com - Flashing Steps:
Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.
Огоҳӣ:
- PROPELLERS OFF: REMOVE ALL PROPELLERS.
- SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
- FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
- STABLE POWER: ENSURE STABLE POWER SUPPLY.
- www.FlySpark.in
Саволҳо
Чӣ тавр ман нармафзори нармафзори ESC-ро навсозӣ кунам?
To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.
Ҳуҷҷатҳо / Сарчашмаҳо
 |
FlySpark F4 V1 Stack Flight Controller [pdf] Дастури корбар F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller |