XK5-SMF241 Wireless Communication System Module
Product Information
Specifications:
- FCC ID: XK5-SMF241
- Application Purpose: Change in FCC ID
- Type of Device: Wireless Communication System Module
Product Usage Instructions:
1. Installation:
Follow these steps to install the Wireless Communication System
Module:
- Locate a suitable mounting location for the module.
- Ensure proper power supply connections are made.
- Securely fasten the module in place using appropriate
hardware.
2. Configuration:
Configure the device by following these steps:
- Access the device settings through the provided interface.
- Adjust the communication parameters as needed.
- Save the settings and restart the device if required.
3. Troubleshooting:
If you encounter any issues with the device, refer to the
troubleshooting section of the user manual for assistance. You can
also contact customer support for further help.
Frequently Asked Questions (FAQ):
Q: How can I reset the device to factory settings?
A: To reset the device, locate the reset button on the module
and press it for 10 seconds. This will restore the device to its
factory settings.
Q: Is the device compatible with all wireless networks?
A: The device is designed to work with standard wireless
networks. Ensure compatibility with your specific network before
installation.
To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA
Re.: Integration Instructions
FCC ID: XK5-SMF241 Application Purpose: Change in FCC ID Type of Device: Wireless Communication System Module
To whom it may concern:
The new Grantee “steute Technologies GmbH & Co. KG” received permission from the original Grantee “u-blox AG” (GC: XPY) to use their detailed integration manual as submitted for the original certification (FCC ID: XPYNINAB30), because this modular approved transmitter will only be integrated by “steute Technologies GmbH & Co. KG” in their own final host devices and never be marketed separately to any third parties therefore no individual integration manual for marketing purposes is necessary. The original integration instructions includes details about the proper integration and further guidance for the integration to assure compliance of the final host device with the applicable regulations. The labelling of the RF Module and the host devices will reflect the declared product identification by “steute Technologies GmbH & Co. KG”. Sincerely,
Authorized Agent
Documents / Resources
 |
TESTLAB XK5-SMF241 Wireless Communication System Module [pdf] Instructions XK5-SMF241, XK5SMF241, SMF241, XK5-SMF241 Wireless Communication System Module, XK5-SMF241, Wireless Communication System Module, Communication System Module, Module |