Tersway TW-LI01 Smart Scent Diffuser User Manual

Pull out the entire atomizer head (with the essential oilbottle attached).
Unscrew the essential oil bottle, refill with essential oil,then screw it back onto the atomizer head.

Reattach the atomizer head to the base and connect the powersupply.

Display Screen/Lights/Buttons

Backlight: The backlight and button lights remain on when powered on. Returns to home screen after 15 seconds of inactivity.

Bluetooth Indicator:
Blue light: Bluetooth connection successful

Off: Bluetooth disconnected
Blue flashes twice: Bluetooth receives data from the app.

App Control (Bluetooth Mode)

After downloading the app and pairing your device, you can control various settings and functions through the app interface.

FAQs

Q: How do I reset the device to factory settings?
A: You can reset the device to factory settings by accessing theDevice Status Page on the app and selecting the Factory Reset option.

“`

View Fullscreen

TW-LIOl(280Xl10mm157g

Th;s dev;ce ;, des;gned for ,;mple and conven;ent operaUon. Please read the ;nstruct;ons carefully and follow the user manual.

INSTALLATION

I I. Insert the magnetic card into the slot to
unlock the atomi,er head.

2. Pull out the entire atomi,er head (with
the essential oil bottle attached)

0 /

3. Unscrew the essential on bottle, refill with essential oil, then screw it back onto the atomi,er head

I 4. Reattach the atomi,er head to the ce and connect the power supply

PRODUCT INFORMATION

ec296Xl62X3SSmm Voltage, AC 100-240N

I we;ght7Kg Capadty. 1000ml

I Powecc25W
I Co,eragec5000-SOOOm’

DISPLAY SCREEN/LIGHTS/BUTTONS

881,,
‘ _,,,·,

Backl;ght

Backlight: The backlight and button lights remain on when powered on Returns to home screen after 15 seconds of inactivity.

Bluetooth Indicator:

Blue light: Bluetooth connection successful Off: Bluetooth disconnected

Blue flashes twice: Bluetooth receives data from the app.

MOOE

Parameter Switching Button Mode settings, working frequency,and page navigation.

SET Settings Button Configures time,day of the week,etc.

Increase Buttons: Adjust numerical values.

“‘

DOWN Decrease Buttons: Adjust numerical values.

Fan Switch

Blue button light: Fan function on

Red button light: Fan function off.
Start/Pause Button: – Blue button light Operation started

– Red button light: Operation paused

Essential Oil Level Indicator: Geen “High’oil level.
— Yellow:”Medium” oil level Red “Low” oH 1..,,1.

I Sound prompt The de,ke emits a “beep’ wheo recei,iog sigoals or upoo aoy ,aiid
buttoo operatioo
I Factory Reset PLong-press the MODE button for 5 secoods. Factory· set
parameters: 60 seconds on, 200 secoods off, operating time Monday to Sunday
from 08:00 to 22:00.
I Button Lock Press and hold the SET button for 3 seconds to toggle button lock/

unlock

APP CONTROL (BLUETOOTH MODE)

Af er B

a nt d o lp

‘, ,:

S A C.

c p “o

a p “n

e n
n e

NO e I

B tu e 0 t

A _ .l d

ra n g e a n y da e

u e t th C

r oot a c c o

e S

h e Q R co

G o tod

n p a” g . t e

iI tsS

er cc

Om m n ne

c t

ce r es

v a

._ c e , cS o n a

n rn

e c 1, n gt t 0

n , th e th e Bd l

,
e v _ c e mI e 0 o th m

d i e

o. it h y o u r

h e page

u t. Phone
S le c

t o” g

d wo

” e

r c

end

h”

:f ?

r”

·. ?

d”

eC O

e t0 a 1 0 W d a n d S e 1n d ,m

“n a g

n”t
I In

e. A o

p p e

t o t

la b

d e V ,c e s

t n

y o

e ld eo

,n nn

t Ih c

e t

“A to l

i ce e

t h a t d e sg

c0 n n ev tc

.1 0 m ,

M y D e V IC e

·_ n t h e ” M s y

B Iu e 0 th r

t w j j u m p te

|D De

i e

.I c

VV , C e

e s

s ”

t hg

o a rt

n g ei r e S h o wo

th e d e ic e d e

h ave b ee n co n

u p , d e v ‘, c e s

n ne o

in g r y

t 0

e a t ly S W I c h e s 0 B U e t0 0 t m 0 d e

d Ii n

se ” ..

.”

g n o a d a n UJ _ n s t a l

” ” e

”

” A

” r

” u

” se

Al d in g ”

G o tl t

th e

” st

f rf

a rn d

h .d “e rm

d I

e” S

v . “.CI 1

-e . . ” n s , ., n

. ” 1u

” d

o
. . . . – . .
.1 n g l o a t i

e “””””n S e r .I e

i § Ss 0

v C

p h 0 n e ,s B u e 0 o t h ” g r u p ,l c l tI k 0 n

, a of e r S u c C C s s f u l

p tg e

c te a r d sp l y e

c ud r e en t li y w a i h d i n

Device Status Page. -Toggle: The phone can turn the device’s operating status on/off with one click.
-Factory Reset: The phone can reset to factory settings with one click.
-Working Mode: Click “Add” to create up to 5 working modes, click the switch button in the upper right corner of the mode window to turn the mode on/off, long press the mode window to select delete mode, click the mode window to customize and edit days of the week, time periods, and frequency
I Day Setting Select the desired days I Time Period Setting Adjust the dI to select the working time period
Note: If the time period needs to cross 00:00, it must be set as two consecutive time periods (the end time cannot be less than the start time), for example, 23:00-02:00, set as two groups: 23:00-23:59, 00:00-02:00.
I Frequency Setting Adjust the dial to select the working frequency.
Operating time range: 1-30 seconds: Pause time range: 60-500 seconds.

SYSTEM TIME SETTINGS

-Pressthe[SEbuttoo for the first Orne to enter the hour settlog Thehour digits willRash,adjust the hour time by psing the [UP/DOWN] buttons .psthe [SEbutton for the second time,the hour is confirmed aod set,and mo,e to the minute setting. The minute di©ts will Rash,adjuthe mioute time by ping the [UP/DOWN] buttons. -Prs the[SETI buttoo forthe third time,the mioute is confirmed aod set, and mo,e to the workday settiog. The workday digits will Rash,adjust the workday time by pressing the
WORKING MODE SETTINGS [UP/DOWN[ buttons.
Pressthe[Sbutton forthefourth time,confithatthetime setting scomplete.

AFlrst,pss the[MODE] button, the LCD display shows the factory setting time, this machine can set 5 working modes For e,ample,t 8 am-10 am, 11 am-12 pm, I pm-2 pm. Crosslng over oo,oo,set two time periods,such as the fit period 08,00-23,59,thecond period 00,01-06,00 The first time you pess the [SEbutton,you enter the start timettlng fo the first t,me period,the hour digits flash,and you adjust the hour by pressing the [UP/DOWN] buttons. Press the[SEbutton for the second time,the hour setting Is completed. The minute digits flash. Adjust the minute by pressing the[UP/DOWN] buttons. Upon the third press of the [SET] button,the minutettlng Is completed,and move to set the work day. Pressing the [UP] button once will display the symbol “”” at the top of the LCD screen In the day of the week column,Indicating that the workday Is selected. If””” Is not displayed,It means It Is not selected. Then press [DOWN] to move right and continue settlngotherday comblnatlons. B Press the[MODbutton for theond time to set the off time. The fit press of the [SETI button enter the setting of hou, adjust the hour by pressing the [UP/DOWN] buttons; the second pess of the [SETI button completes the hou settln& and the minute digits begin to blink,adjust the minute by pressing the [UP/DOWN] buttons.

C Prs the[MODE] button for thethlrd time to enter the spray duration (Intensity setting) Adjust the Intensity by pressing the[UP/DOWN] buttons,select the appropriate Intensity,with each preadjusting the duration by 5 seconds,the ma,lmum ,aiue Is 200 seconds,and the mlalmum ,alue ls S seconds.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure statement The device has been evaluatec to meel general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Documents / Resources

Tersway TW-LI01 Smart Scent Diffuser [pdf] User Manual
2BPW3-TW-LI01, 2BPW3TWLI01, TW-LI01 Smart Scent Diffuser, TW-LI01, Smart Scent Diffuser, Scent Diffuser, Diffuser

References

User Manual

Tersway TW-LI01 Smart Scent Diffuser

Specifications

Product Information

Installation

Display Screen/Lights/Buttons

FAQs

Documents / Resources

References

Leave a comment

Cancel reply