Tera Pet H01 Microchip Reader Scanner
Getting to know the reader
This item is a wireless hand-held microchip reader that can read ISO FDX-B coded radio frequency identification tags. It has very simple controls and a high-brightness OLEO display which allows you to read the numbers even in bright sunlight.
With built-in memory, it can store up to 30 ID tag codes, which can be downloaded to a computer via a USB cable connection
(Note: There must be a text field for the reader to input characters in when downloading stored codes). Optimum performance delivers great animal traceability management.
Specifications
- Power Built-in Rechargeable Battery (Charge it for 2 hours before the first use)
- Battery Life 4 hours (Work Continuously)
- Operating Frequency 134.2KHz
- Tag Compatibility ISO FDX-B(ISO11784/85)
- Interface USB 2.0
- Display OLEO
- Memory 30 ID Numbers
- Indicator Audio Beeps and OLEO
- Read Distance 10-15cm (Glass Tag, vary on Chip Sizes & Types) 20-22cm (Ear Tag, vary on Chip Sizes and Types)
- Language English
- Accessory USB Cable *1
- Operating Temperature -10° C to 55°C
- Storage Temperature -30° C to 65°C
- Relative Humidity 5% to 90% non-condensing
- Package Dimensions 21.3cm*14.9cm*2.9cm
- Weight 90g
Instructions
- Hold down the button for 3s to power up the reader and the following sign appears on the screen.
- Hold the reader over the chip location. If the reader fails to detect any tags, it displays No Tag on the screen.
(Note: The reader will stop reading if no tags are detected within 20) - If the reader detects a tag, it displays the number on the screen.
- Press the button once to continue scanning tags.
- To check scanned data, press the button twice while the screen shows the read sign.
- If there are no further inputs, the scanned data will remain displayed for 5s and the reader will turn off in 60s.
Documents / Resources
 |
Tera Pet H01 Microchip Reader Scanner [pdf] User Guide H01 Microchip Reader Scanner, H01, Microchip Reader Scanner, Reader Scanner, Scanner |