893003 Mastercharge
Instructions
MASTERCHARGE 740

- 7.4 kW (32 A, 230 V, single phase) charging station for electric vehicles using AC alternating current (mode 3).
- Use after authentication with RFID badges reserved for authorized users. Can be installed both indoors and outdoors in sheltered locations (IP54, operating temperature from -20° C to +50°C).
- Supplied with direct charging cable (5m) with type 2 connector, wall bracket and 2 activation badges.
DESCRIPTION
Charging station for electric vehicles using AC alternating current (Mode 3).
Mastercharge is equipped with an integrated 5 meter long charging cable with Type 2 connector and is suitable for both indoor and outdoor installations in sheltered areas (IP54, operating temperature -20° C; +50° VS).
Use of Mastercharge is only possible by identification with an RFID badge reserved for authorized users.
Easy to install, Mastercharge is a plug-and-charge solution that is safe and intuitive.
Features
- Power 7.4 kW (32A 230V single phase);
- Mode 3 connection, Type 2 connector;
- Cable length 5 meters;
- Activation with RFID badge (2 cards provided);
- Degree IP54.
Complies with LVD (EN 61851-1, EN 61851-22) and EMC (EN 61000-6-2, EN 61000-6-3) standards.
TECHNICAL DATA
| CODED 893003 | |
| MAX POWER 7.4kW | |
| EV CONNECTOR TYPE Type 2 | |
| DEGREE OF PROTECTION IP54 |
| TENSION RESEAU MONOPHASE 230 V |
|
| COURANT MAX 32 A |
|
| Mode 3 | |
| III |
| FREQUENCE DU RESEAU 50 Hz |
|
| POTENZA STAND BY 3 |
|
| Case C | |
| DIMENSIONS (LxLxH) 13,2 x 27,0 x 36,2 cm |
POIDS 4,85 kg
DOWNLOAD
| CATALOG IMAGE | |
| INSTRUCTION MANUAL | |
| BROCHURE | |
| CERTIFICATE |
Telwin SPA – Via della Tecnica, 3 36030 Villaverla (VI) – ITALY
www.telwin.com
MASTERCHARGE 740 – PAG. 3/3
Documents / Resources
![]() | 893003 Mastercharge |
References
- User Manualmanual.tools
Published: December 28, 2023
