Telrad BreezeAIR B-STD-MK Pole Mounting Kit
Specifications
| Kit Weight | 0.75 Kg |
| Diameter Range | 1”-2” (standard package) 2.5”-6” (* optional) |
| Movement Range | ± 45° |
Packing list
| Item | Qty | Description |
| 1 | 1 | Radio unit |
| 2 | 1 | B-MK1 (End Mounting Member) |
| 3 | 4 | 5/16-18UNC combination screw |
| 4 | 1 | B-MK2 (Middle Mounting Member) |
| 5 | 4 | M6XL12 combination screw |
| 6 | 2 | Square hoop (U bolts) |
| 7 | 1 | B-MK3 (Back Mounting Member) |
| 8 | 4 | M6-Frank nut |
| 9 | 2 | Clamp 102-152mm (* optional) |
Installation
- STEP 1:
- Place B-MK1 (2) on the radio unit (1), as illustrated in the picture. Align the holes with the screw studs.
- Connect B-MK1 (2) to the radio unit (1) with 4 screws (3). Tighten the screws at a torque of 46 Lbs·In.
- STEP 2 (pole mount only, for wall mount please skip to step 3-C):
- Connect B-MK2 (4) to B-MK1 (2) with 4 screws (5). Leave the screws slightly loose.
- Connect B-MK2 (4) to B-MK1 (2) with 4 screws (5). Leave the screws slightly loose.
- STEP 3-A | U bracket (pole up to 2”):
- Place U bolts (6) to B-MK2 (4)
- Place B-MK3 (7) on pole and the U bolts (6) and tighten using 4 nuts (8).
- Adjust the desired angle, and fully tighten the 4 loose screws (5) and 4 nuts (8) at a torque of 46 Lbs-In.
- STEP 3-B | Band (pole 2.5”-6”, * not included in standard package):
- Thread the 2 clamps (9) in the 4 slots of B-MK2 (4)
- Adjust the desired angle, and fully tighten the 4 loose screws (5) and the 2 screws on clamps (9)
- STEP 3-C | Wall mount:
- Place B-MK2 (4) to the wall.
- Connect B-MK2 (4) to B-MK1 (2) with 4 screws (5). Leave the screws slightly loose.
- Adjust the desired angle, and fully tighten the 4 loose screws (5) at a torque of 46 Lbs-In.
Customer Support
© Copyright 2021 Talrad Networks Ltd. All rights reserved. Tairad its logo and all names, product and service names referenced herein are either registered trademarks, trade names or service marks of Talrad Ltd. in certain jurisdictions All other names are trademarks of their respective owners Content herein is subject to change without further notice. Any PO’s submitted and actual supply of products and/or grant of licenses are subject to Telrad’s General Terms and Conditions and/or any other effective agreement between the parties Roadmap information is provided solely for information purposes, and is not a commitment to deliver any products, features and/or functionalities.
Documents / Resources
 |
Telrad BreezeAIR B-STD-MK Pole Mounting Kit [pdf] Instruction Manual BAXE6X, ARA-BAXE6X, ARABAXE6X, BreezeAIR B-STD-MK Pole Mounting Kit, BreezeAIR B-STD-MK, Pole Mounting Kit, Mounting Kit, Kit |
