Televes-logo

Televes Overlight Series Optical Transmitters

Televes-Overlight-Series-Optical-Transmitters-product

Specifications

  • Product Series: Overlight Series
  • Edition: April 2025
  • Features: Enhanced electronics and optical engineering for TV distribution over fibre optics
  • Compatibility: GPON compatible
  • Manufactured by: Televes

SATELLITE AND TERRESTRIAL TV DISTRIBUTION OVER FIBRE OPTICS
With the Overlight series you will get an integrated TV installation with all the services through a single optical fibre, reducing the number of antennas and devices in the installation without losing the quality of the terrestrial and satellite TV signal.
Thanks to the low losses of the fibre and the high distribution rate, it is possible to provide TV services to housing estates, blocks of apartments, hotels and campsites, residences, and other FTTx solutions.

Televes-Overlight-Series-Optical-Transmitters-fig-1

Why choose Overlight

  • The Overlight series is suitable for all types of FTTx installations, such as residential areas, leisure and entertainment areas, hotels, campgrounds and residences.
  • With a high output level and a splitting ratio of 64 users, it is capable of reaching large collective installations.
  • It allows the option of optical amplification to increase the number of users up to a maximum of 512 while mantaining signal quality.
  • Suitable for a number of solutions and technologies such as dCSS.
  • Satellite and terrestrial distribution is carried out through a single optical fibre, which reduces installation costs and materials.
  • Optimized electronic performance resulting in low loss and a balanced end-to-end TV signal for all DTT services and up to 4 full satellites.
  • It includes both outdoor and indoor installation options for greater flexibility in deployment.
  • Compatible with GPON deployments, to incorporate TV services in the Hospitality sector.
  • 100% European design, quality and manufacture.

Advantages of fibre optics

  • Enables deployments with minimal attenuation and maximum performance, even over long distances.
  • Unlike coaxial cables, it does not suffer electromagnetic interference.
  • Offers great flexibility for the installer and users.
  • Allows reduction in the size of the infrastructure and simplifies maintenance tasks.
  • Longer lifespan compared to structured cable.
  • Technology prepared for future services.Televes-Overlight-Series-Optical-Transmitters-fig-2

Benefits for the installer

  • Considerable savings in installation times compared to structured cable.
  • Systems with low levels of interference.
  • Simplification of maintenance tasks and network operations.
  • High security wiring against fires.
  • Material and labour cost savings.
  • Installation free of noise, distortion and interference in the TV transmission.

Benefits for owners and end users

Televes-Overlight-Series-Optical-Transmitters-fig-3

  • Low maintenance costs.
  • Safe infrastructure that guarantees a low risk of fire.
  • Discreet installation without aesthetic disturbances.
  • Long lasting technology ready for the services of the future.Televes-Overlight-Series-Optical-Transmitters-fig-4

Solution products

LNB WideBand 2 outputs: V/H

Ref. 747402
Wideband LNB converter, characterized by a single local oscillator.
It captures the entire frequency spectrum of a satellite and transmits them through two otputs (V-H) in a frequency range between 290 and 2340 MHz.Televes-Overlight-Series-Optical-Transmitters-fig-5

Televes-Overlight-Series-Optical-Transmitters-fig-6

LNB WIDEBAND

LNB WIDEBAND Ref. 747402
Frequency range GHz 10.7…12.75
Output frequency range MHz 290…2340
L.O. frequency 22KHz GHz 10.41
Gain dB 57
Noise figure dB 0.3
L.O. stability MHz -1.5…1.5
Polarities discrimination dB > 20
Phase noise (@10 KHz) dBc -80
Powering Vdc 10.5…21
Max. current mA 100
Impedance Ω 75
Connectors   “F” Female
LNB-bracket diameter mm 40
Operating temperature °C -40…60

WIDEBAND AMPLIFIERS

Ref. 237561/62
Compact WideBand amplifiers for the distribution of satellite signals. These devices amplify the signal received from the LNB and are responsible for compensating the losses of the coaxial cable in the Overlight installation. Equipped with 2 (H/V) WideBand inputs and 2 (H/V) WideBand outputs (250-2400 MHz).
They receive power from the Overlight transmitter through the output connectors. Optionally, an external power supply can be used via the jack connector.
Indoor use.

Televes-Overlight-Series-Optical-Transmitters-fig-8

Televes-Overlight-Series-Optical-Transmitters-fig-7

WIDEBAND AMPLIFIERS

WIDEBAND AMPLIFIERS Ref. 237561 237562
Number of inputs   2
Number of outputs   2
Bands   SAT
Frequency range MHz 250…2400
Output level EN60728-3 IMD3 2tones -35dB dBμV 118
Gain dB 13 29
Gain adjustment range dB 0…13
Slope regulation dB 0…12
Isolation dB > 25
Powering Vdc 12…18
DC pass through SAT line mA 500
Max current (@12V) mA 110 150
Max current (@18V) mA 73                                                        100
Max. power consumption W 1.32 1.8
Protection index   20
Weight g 381
Dimensions (xyz) mm 137 x 120 x 30

CWDM OPTICAL TRANSMITTERS

(indoor)
Ref 237503/04/05/06/07
CWDM optical transmitters specifically designed for indoor installation.
These devices receive the satellite signal from the outputs of a Wideband RF LNB and terrestrial band and send it to up to 64 users without the need for amplification, through a single fibre output (“SC/APC” connection).
Thanks to the different options offered with wavelengths of 1510, 1530, 1550 or 1570 nm, the system allows the transmission of up to 4 full satellites through a single optical fibre.
An external power supply and adapter cable are included to provide power through the dedicated “F” connector.Televes-Overlight-Series-Optical-Transmitters-fig-9 Televes-Overlight-Series-Optical-Transmitters-fig-10

OPTICAL TRANSMITTERS Ref. 237503 237504 237505 237506 237507
Inputs/Bands Type TERR V H TERR V H TERR V H TERR V H TERR V H
Frequency range MHz 47…694 290…2340 47…694 290…2340 47…694 290…2340 47…694 290…2340 47…694 290…2340
Input level dBμV 83…95 70…85 83…95 70…85 83…95 70…85 83…95 70…85 83…95 70…85
Powering per inputs Vdc 11.7…17.7 11.7…17.7 11.7…17.7 11.7…17.7 11.7…17.7
Max. Current pass mA 500 500 500 500 500
Max. current pass total inputs mA 720
Impedance Ω 75
Laser Type MQW-DFB uncooled
Wavelength nm 1310 1550 1570 1510 1530
Optical output power dBm 10 9 9 9 9
RF connectors Type “F” Female
Optical connectors Type SC/APC
Powering Vdc 12…18
Max. power consumption W 5.6
Current consumption mA <430
Operating temperature ºC -5…45
Weight g 400
Dimensions (xyz) mm 137 x 123 x 45
PSU
PSU input voltage Vac 100…240
Max. PSU current input mA 600
PSU output voltage Vdc 12
Max PSU output current A 1.5
Weight g 145
Dimensions (xyz) mm 95 x 35 x 88

(outdoor)

Ref.237513/14/15/16/17
CWDM optical transmitters specifically designed for outdoor installation, at a minimum distance from the LNB . These devices receive the satellite signal from the outputs of a Wideband RF LNB and terrestrial band and send it to up to 64 users without the need for amplification, through a single fibre output (“FC/APC” connection).
Thanks to the different options offered with wavelengths of 1510, 1530, 1550 or 1570 nm, the system allows the transmission of up to 4 full satellites through a single optical fibre.
They include a protective case for its outdoor installation (IP22). An external power supply and adapter cable are included to provide power through the dedicated “F” connector.

Televes-Overlight-Series-Optical-Transmitters-fig-11Televes-Overlight-Series-Optical-Transmitters-fig-12

OPTICAL TRANSMITTERS

OPTICAL TRANSMITTERS Ref. 237513 237514 237515 237516 237517
Inputs/Bands Type TERR V H TERR V H TERR V H TERR V H TERR V H
Frequency range MHz 47…694 290… 2340 47…694 290… 2340 47…694 290… 2340 47…694 290… 2340 47…694 290… 2340
Input level dBμV 83…95 70…85 83…95 70…85 83…95 70…85 83…95 70…85 83…95 70…85
Powering per inputs Vdc 11.7…17.7 11.7…17.7 11.7…17.7 11.7…17.7 11.7…17.7
Max. Current pass mA 500 500 500 500 500
Max. current pass total inputs mA 720
Impedance Ω 75
Laser Type MQW-DFB uncooled
Wavelength nm 1310 1550 1570 1510 1530
Optical output power dBm 10 9 9 9 9
RF connectors Type “F” Female
Optical connectors Type FC/APC
Powering Vdc 12…18
Max. power consumption W 5.6
Current consumption mA <430
Operating temperature ºC -5…45
Weight g 400
Dimensions (xyz) mm 137 x 123 x 45
PSU
PSU input voltage Vac 100…240
Max. PSU current input mA 600
PSU output voltage Vdc 12
Max PSU output current A 1.5
Weight g 145
Dimensions (xyz) mm 95 x 35 x 88

OPTICAL RECEIVERS

Ref. 237640/50/23/33
Optical receivers are in charge of capturing the optical TV signal (1200…1600nm) sent by the transmitters in order to process it and recover the original satellite and terrestrial TV signals. Depending on the type of services to be received, four models are available:

  • Ref. 237640: Overlight Quattro Optical Receiver:
    It provides 4 RF outputs with Quattro mode: one of the four TVSAT polarity and band combinations is provided on each connector. Power is supplied through the multiswitch.
  • Ref. 237650: Overlight Quad Optical Receiver:
    It provides 4 RF outputs with Quad mode: the four polarities and bands are provided on each connector. Power is supplied through the receiver (STB).
  • Ref. 237623: Overlight dCSS Optical Receiver with 2 dCSS/Legacy output: It provides 4 RF outputs: 2 for SKY services and terrestrial TV, and 2 for terrestrial TV. External power supply included.
  • Ref. 237633: Overlight dCSS Optical Receiver with 4 dCSS/Legacy output: It provides SKY services and terrestrial TV through its 4 RF outputs. External power supply included.Televes-Overlight-Series-Optical-Transmitters-fig-13

Televes-Overlight-Series-Optical-Transmitters-fig-14

OPTICAL RECEIVERS

OPTICAL RECEIVERS Ref. 237640 237650 237623 237633
Inputs/Bands Type TERR Legacy TERR Legacy TERR dCSS/Legacy TERR dCSS/Legacy
Number of outputs   1 4 4 4 4 2 4 4
Output level dBμV 79…83 64…71 69…73 64…71 69…73 80/64…71 69…73 80/64…71
Output frequency range MHz 87…694 950…2150 87…694 950…2150 87…694 950…2150 87…694 950…2150
Impedance Ω 75
Wavelength nm 1200…1600
Optical device Type InGaAs pin photodiode
Optical input level dBm -13…-6
RF Connectors Type F “Female”
Optical Connectors Type SC/APC
Powering Vdc 12…18
Max. current consumption (@12V) mA 750 550 750
Max. current (@18V) mA 570 530 410 530
Operating temperature ºC -5…+45
Weight g 670 360 670
Dimensions (xyz) mm 149 x 130 x 43 125 x 91 x 30 149 x 130 x 43
PSU
PSU input voltage Vac   100…240
PSU output voltage Vdc   12
Max PSU output current A   1,5
Weight g   164
Dimensions (xyz) mm   96 x 43 x 60

These measurements are conditioned to the use of an Overlight transmitter.

ACCESSORIES

Televes-Overlight-Series-Optical-Transmitters-fig-15

OPTICAL SPLITTERS

233710 Optical Splitter 1250…1650nm “SC/APC” 2D 4dB 8424450255681
233910 Optical Splitter 1250…1650nm “SC/APC” 4D 7dB 8424450255698
234410 Optical Splitter 1250…1650nm “SC/APC” 8D 10dB 8424450255704
234510 Optical Splitter 1250…1650nm “SC/APC” 16D 14dB 8424450256015
234610 Optical Splitter 1250…1650nm “SC/APC” 32D 17dB 8424450276778

PRE-TERMINATED PATCH CORDS

232610 F.O. Patch Cord Single-mode Indoor LSFH Dca “SC/APC” 5m 8424450265598
232611 F.O. Patch Cord Single-mode Indoor LSFH Dca “SC/APC” 10m 8424450222904
232612 F.O. Patch Cord Single-mode Indoor LSFH Dca “SC/APC” 15m 8424450222911
232613 F.O. Patch Cord Single-mode Indoor LSFH Dca “SC/APC” 20m 8424450265604
232614 F.O. Patch Cord Single-mode Indoor LSFH Dca “SC/APC” 25m 8424450222928
232615 F.O. Patch Cord Single-mode Indoor LSFH Dca “SC/APC” 30m 8424450265611
232616 F.O. Patch Cord Single-mode Indoor LSFH Dca “SC/APC” 40m 8424450222935

ADAPTER CABLES

Televes-Overlight-Series-Optical-Transmitters-fig-16

OPTICAL ATTENUATORS

236410 Optical Attenuator 1310/1550nm “SC/APC” 2dB 8424450190449
236411 Optical Attenuator 1310/1550nm “SC/APC” 5dB 8424450190456
236412 Optical Attenuator 1310/1550nm “SC/APC” 10dB 8424450190463
236413 Optical Attenuator 1310/1550nm “SC/APC” 15dB 8424450256022

Televes-Overlight-Series-Optical-Transmitters-fig-17

Televes-Overlight-Series-Optical-Transmitters-fig-18 Televes-Overlight-Series-Optical-Transmitters-fig-19 Televes-Overlight-Series-Optical-Transmitters-fig-20 Televes-Overlight-Series-Optical-Transmitters-fig-21 Televes-Overlight-Series-Optical-Transmitters-fig-21 Televes-Overlight-Series-Optical-Transmitters-fig-23 Televes-Overlight-Series-Optical-Transmitters-fig-24

More information at:
en.televes.com/overlight

Televes-Overlight-Series-Optical-Transmitters-fig-25

www.televescorporation.com | www.televes.com

FAQ

  • Why choose Overlight?
    The Overlight series provides an integrated TV installation with high-quality TV signals over fibre optics, reducing the need for multiple antennas and devices.
  • What are the advantages of fibre optics in TV distribution?
    Fibre optics offer low losses and high distribution rates, ensuring reliable TV services for various setups.
  • What are the benefits for installers and end users?
    Installers benefit from easy installation and maintenance, while end users enjoy high-quality TV services for the future.

Documents / Resources

Televes Overlight Series Optical Transmitters [pdf] Owner's Manual
747402, Overlight Series Optical Transmitters, Overlight Series, Optical Transmitters, Transmitters

References

Leave a comment

Your email address will not be published. Required fields are marked *