OSCAPC2 Single Mode SM Fiber Optic Patch Cord
“
Product Information
Specifications
- Product Name: Single-mode Fiber Optic Patch Cord
- Fiber Type: Single-mode (SM)
- Connector Type: SC/APC
- Cover Type: LSFH (Low Smoke Free of Halogen)
- Length: 2.00 meters
- Recommended Use: Indoor
Description
The Single-mode Fiber Optic Patch Cord is designed for
interconnecting optical equipment. It comes pre-terminated with
SC/APC connectors on both ends. The 900m cover is of LSFH type,
making it suitable for indoor use.
Features
- Short boot connectors for easy installation
- Reduces attenuation due to undesired bends
- Facilitates sliding through conduits
- Less demanding on bend radius
- Convertible to a pigtail for fusion splicing
Physical Data
- Net Weight: 8.00 g
- Gross Weight: 14.00 g
- Width: 9.00 mm
- Height: 2,120.00 mm
Packaging Info
Box contains 25 pieces of the patch cord.
Highlights
- ITU-T G.657.A2 fiber type
- LSFH sheath in white color
- SC/APC connectors
- 2m in length
Manufacturer Website
Visit Televes website for more
information.
Product Usage Instructions
Installation
- Identify the equipment to be connected with the patch
cord. - Insert the SC/APC connectors into the respective ports.
- Avoid sharp bends when routing the patch cord to prevent signal
loss. - If needed, cut the patch cord to convert it into a pigtail for
fusion splicing.
Maintenance
Regularly check the connectors for dust or damage. Clean with a
soft cloth if necessary. Avoid bending the patch cord excessively
to prevent signal degradation.
FAQ (Frequently Asked Questions)
Q: Can this patch cord be used outdoors?
A: No, it is recommended for indoor use only due to its LSFH
cover.
Q: What is the benefit of a short boot connector?
A: Short boot connectors facilitate installation in wall
sockets, reduce space required for connection, and are less
demanding on bend radius.
Q: Can I cut this patch cord to customize the length?
A: Yes, the patch cord can be cut to convert it into a pigtail
for fusion splicing.
Q: Is fusion splicing difficult to perform?
A: Fusion splicing requires specialized tools and skills, so it
is recommended to consult a professional if you are not experienced
in fusion splicing techniques.
“`
Convertible to Pigtail patch cord SC/APC, Single-mode (SM), LSFH indoor
Single-mode (SM) bre optic patch cord, used for interconnecting optical equipment, has both ends pre-terminated with SC/APC connectors.
The 900 m cover is of LSFH type and is recommended for indoor use. Additionally, its connectors have a short boot, facilitating installation in wall sockets, avoiding attenuation due to undisired bends, aiding the sliding of the patch cords through conduits, reducing the space required for connection, and being less demanding regarding bend radius. It can be cut to convert it into a pigtail, a cable with a single pre-terminated end that allows fusion to the other end.
Ref. Logical ref. EAN13
232602 OSCAPC2 8424450185902
Other features
Colour Length
White 2.00 m
https://www.televes.com
Physical data
Net weight Gross weight Width Height
8.00 g 14.00 g 9.00 mm 2,120.00 mm
1
Packaging info
Box
25 pcs.
Highlights
ITU-T G.657.A2 ber type LSFH sheath, white colour SC/APC connectors 2m long
Depth
Main product weight
8.00 mm 8.00 g
https://www.televes.com
2
Powered by TCPDF (www.tcpdf.org)
Documents / Resources
 |
Televes OSCAPC2 Single Mode SM Fiber Optic Patch Cord [pdf] Owner's Manual 232602, OSCAPC2, OSCAPC2 Single Mode SM Fiber Optic Patch Cord, Single Mode SM Fiber Optic Patch, Mode SM Fiber Optic Patch Cord, Fiber Optic Patch Cord, Optic Patch Cord, Patch Cord |