MHz 12 dB EasyF 4W Tap
“
Product Specifications:
- Frequency Range: 5 – 2400 MHz
- Tap Loss: 12 dB
- Number of Tap Ways: 4
- Connection System: EasyF
- Recommended Installation: First floor (due to tap losses)
- Indoor Installation: Yes, can be used outdoors with a case
(ref. 4177) - Material: Zamak for high shielding
- Weight: 112.00 g (Net and Gross)
- Dimensions: 80.00 mm (Width), 55.00 mm (Height), 14.00 mm
(Depth) - Main Product Weight: 112.00 g
Product Usage Instructions:
EasyF Connection System
The EasyF connection system allows for easy installation and
savings on mounting. Follow these steps for proper connection:
- Unscrew the device’s cover to access the connection.
- Insert the previously stripped coaxial cables into the
device. - Close the cover and screw to ensure a secure connection.
Reliability and Optimization
The product offers outstanding reliability and optimized
electrical behavior:
- Automated manufacturing with new generation
micro-components. - Impulsive noise reduction and improved through losses.
- Bidirectional DC pass between input and output.
- Grounding screw provided for safety.
Environment and Longevity
The product is designed for longevity and environmental
considerations:
- Eliminates solder wearing out over time for increased operating
life. - Reduces failure rates caused by cold soldering joints.
- Optimizes electromagnetic behavior for high frequencies.
- Reduces pollution by eliminating welding processes.
Application Example
Ideal for use in distribution networks and inner networks for
users.
Frequently Asked Questions (FAQ):
Q: Can the tap be used outdoors without a case?
A: While the tap is recommended for indoor installation, it can
also be used outdoors with a separate case (ref. 4177) for
protection against environmental elements.
Q: Is the EasyF connection system compatible with all coaxial
cables?
A: The EasyF system is designed for use with coaxial cables;
however, it is recommended to ensure compatibility with the
specific cable type you are using.
“`
EasyF 4W tap 5…2400 MHz 12 dB
Tap equipped with 4 tap ways and EasyF connection system for SMATV signals, using a compact design and an e cient electrical behaviour. Due to the tap losses (12 dB), installation on the rst oor is recommended. Conceived for indoor installation, it can also be used outdoors with a case (ref. 4177). Supplied in 10-unit boxes.
Ref. Logical ref. EAN13
544402 EFA412 8424450143766
Packaging info
Box Bucket
10 pcs. 300 pcs.
Physical data
Net weight Gross weight Width Height Depth Main product weight
112.00 g 112.00 g 80.00 mm 55.00 mm 14.00 mm 112.00 g
Highlights
EasyF connection system: easy to install, savings on mounting Made of Zamak, high shielding
https://www.televes.com
1
Outstanding reliability: automated manufacturing using new generation micro-components Improves through losses Outstanding electrical behaviour: impulsive noise reduction Grounding screw provided Bidirectional DC pass between input and pass output
Discover
EasyF connection system: simplicity and savings EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.
Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes di cult when there is little room Connection reliability: the clamp holding the cables prevents the coaxial cable to come o Cost savings: no additional connectors are required (neither F nor IEC) Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:
1. Unscrew the device’s cover to access the connection 2. Insert the previously stripped coaxial cables 3. Close the cover and screw to ensure connection Learn more about EasyF system reliability With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.
https://www.televes.com
2
Always as new: the device’s operating life increases when the factor of solder wearing out with time is removed Failure rate reduction: usually produced as a result of cold soldering joints Electromagnetic behaviour optimization: for high frequencies Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced
Application example
Distribution network and Inner network for users.
https://www.televes.com
3
https://www.televes.com
4
Powered by TCPDF (www.tcpdf.org)
Documents / Resources
 |
Televes MHz 12 dB EasyF 4W Tap [pdf] Owner's Manual MHz 12 dB EasyF 4W Tap, EasyF 4W Tap, 4W Tap |