Televes AVANT 12 Programmable Multiband Amplifier

Product Usage Instructions

Safety Precautions

1. Read all instructions before handling or connecting the equipment.
2. Keep the equipment away from water sources and do not expose it to dripping or splashing.
3. Avoid placing objects filled with liquids on the equipment.
4. Ensure proper ventilation by not blocking any ventilation openings.
5. Avoid placing the equipment in highly humid environments.
6. Avoid exposure to heat sources, naked flames, or strong vibrations.
7. Use only manufacturer-specified accessories.

Installation

1. Do not connect the equipment to the mains supply until it is securely fixed to the wall.
2. Allow air circulation around the equipment to prevent overheating.

Maintenance
If the equipment shows any signs of damage, malfunction, exposure to moisture, or abnormal operation, refrain from using it and seek professional assistance for repair.

Frequently Asked Questions (FAQ)

• Can I use the AVANT 12 near water sources?
  No, it is advised to keep the equipment away from water sources and avoid exposure to dripping or splashing.
• What should I do if the equipment is exposed to heat sources?
  Avoid installing the equipment near heat sources such as radiators, stoves, or amplifiers that produce heat. Also, do not place naked flames near the product.
• How should I clean the AVANT 12?
  Clean the equipment only with a dry cloth to prevent any damage due to moisture.

Safe installation

1. Read these instructions before handling or connecting the equipment. Keep these instructions. Heed all warnings. Follow all instructions.
2. Clean only with a dry cloth.
3. Do not use this apparatus near water. Apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as glasses, shall be placed on the apparatus.
4. Do not use this apparatus near water. Apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as glasses, shall be placed on the apparatus.
5. Do not block any ventilation openings. Install according to the manufacturer’s instructions. Please allow air circulation around the equipment.
6. Do not place the equipment in a highly humid environment.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place naked flames, such as lighted candles, on or near the product.
8. Do not place the equipment in a place where it can suffer vibrations or shocks.

Safe operation of equipment connected to the mains supply

• Ambient temperature should not be higher than 45ºC
• Power requirements for this product are: 110- 230V ~ 50/60 Hz (Refs. 532202, 532204) or 220- 230V ~ 50/60 Hz (Refs. 532201, 532203).
• It is strongly recommended not to connect the equipment to the mains supply until all connections have been made.
• The socket outlet shall be installed near the equipment and shall be easily accessible.
• To disconnect the equipment from the mains supply, pull the plug, never the cable.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Unplug this apparatus during lightning storms or when unused for long periods.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled, objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Warning

• Reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
• Do not take the cover off the equipment without disconnecting it from the mains supply.
• This apparatus must be securely attached to the floor/wall walaccording toby the installation instructions. Do not connect the equipment to the mains supply until it is screwed to the wall. Please allow air circulation around the equipment.

SYMBOLOGY

1. To avoid the risk of electric shock, do not open the equipment.
2. The equipment meets the safety requirements specified for Class II equipment withfunctionall earthing.
3. This symboidentifiesfy a functional earthing.
4. To identify electrical equipment designed primarily for indoor use.
5. The equipment complies with the CE mark requirements.

Hereby, Televes S.A.U. Declares that the radio equipment type AVANT 12 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://doc.televes.com.

Documents / Resources

Televes AVANT 12 Programmable Multiband Amplifier [pdf] Instruction Manual T532203, 532201, 532202, 532204, AVANT 12 Programmable Multiband Amplifier, AVANT 12, Programmable Multiband Amplifier, Multiband Amplifier, Amplifier

References

• User Manual