Telbix SKAPA LED Trailing Edge Dimmer Instruction Manual
Installation Instruction
Product Parts
- A. 2x Lamp 10W
- B. 2x Metal shade ring
- C. 5x Silicone washer
- D. 1x Cap (used only for single glass)
Note:
2 (two) people are required to install this fitting.
IMPORTANT
Must be installed by a qualified electrical contractor.
Install in accordance
with AS/NSZ3000
Documents / Resources
 |
Telbix SKAPA LED Trailing Edge Dimmer [pdf] Instruction Manual SKAPA LED Trailing Edge Dimmer, SKAPA, LED Trailing Edge Dimmer, Trailing Edge Dimmer, Edge Dimmer, Dimmer |