TEKVOX TPUH460 HDMI 1.4 Extender with Ethernet
Version: TPUH460S_2025V1.2
Specifications
- Product Name: TPUH460
- Model Number: 79086-S
- Brand: TEK TPUH460
- Description: HDMI 1.4 Extender with Ethernet & RS-232
- Version: TPUH460S_2025V1.2
- Website: www.tekvox.com
Safety Precautions
To ensure the best performance from the product, please read all instructions carefully before using the device. Save this manual for further reference.
- Unpack the equipment carefully, and save the original box and packing material for possible future shipment
- Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury to persons
- Do not dismantle the housing or modify the module (electrical shock or burn hazard)
- Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction
- Refer all servicing to qualified service personnel
- To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water
- Do not put any heavy items on the product’s power cable
- Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards
- Install the device in a place with sufficient ventilation to avoid damage caused by overheating
- Keep the module away from liquids
- Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills onto the housing, unplug the module immediately.
- Do not twist or pull by force the ends of the cable. It can cause malfunction.
- Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
- Unplug the power cord when left unused for a long period of time
- Information on disposal for scrapped devices: do not burn or mix with general household waste; please treat them as normal electrical wastes
Product Introduction
The HDMI 1.4 Extender consists of a transmitter and a receiver. It can extend 4K or 1080p video to distance up to 328 feet (100 meters) over a single CAT6a cable. It supports bi-directional RS-232 pass-through control and Ethernet extension. 36V PoC feature allows the transmitter can be powered by the receiver and only one power adapter is needed in system.
Features
- Supports HDMI 1.4 and the HDMI video resolution up to 4K@60Hz 4:2:0
- Supports HDCP bypass and is HDCP 2.2 compliant
- Extends 4K or 1080p video signals to distances up to 328 feet (100 meters) over a single CAT6a cable
- Bi-directional RS-232 pass-through control and Ethernet extension
- Provides up to 30W power for 3rd party device (e.g. HD Camera) on transmitter
- Supports 36V PoC, which allows the transmitter to be powered by the receiver
Package List
- 1x Transmitter
- 2x TX Mounting Ears with 2x screws
- 4x TX plastic cushions
- 1x RS-232 Cable (3-pin to 8-pin Mini-DIN)
- 2x 3-pin terminal blocks
- 1x Power Adapter (DC 24V, 2.71A)
- 1x Power Cord (2-pin to 5.5×3.0mm jack)
- 1x Receiver
- 2x RX Mounting Ears with 2x screws
- 4x RX plastic cushions
- 1x RS-232 Cable (3-pin to DB-9)
- 1x 2-pin terminal block
- 1x Power Cord
- 1x User Manual
Note: Please contact your distributor immediately if any damage or defect in the components is found.
Panel Description
Transmitter
- HDMI IN: Connects to HDMI source device
- CAM 12V: Provides 12V, 2.5A power for source device (e.g. camera)
- Ethernet: Used for Ethernet extension together with the Ethernet port of the receiver. If one Ethernet port is connected to a router, the other is able to access the LAN network
- RS-232: Connects to the source device (e.g. camera) to be controlled by a far-end control device, or connects a control device (e.g. PC) control a far-end display device (e.g. projector)
- Power LED: Illuminates green when power is applied
- HDBaseT Out: The RJ45 port is connected to the HDBaseT Input port of the receiver by a CAT6a cable. The LINK LED illuminates when there is a valid HDBaseT link between the transmitter and receiver. The HDCP LED illuminates when the video contains HDCP content, or blinks when the video is transmitted without HDCP content.
Receiver
- HDMI Out: Connects to HDMI display device (e.g., projector)
- Ethernet: Used for Ethernet extension together with the Ethernet port of the transmitter. If one Ethernet port is connected to a router, the other is able to access the LAN network
- RS-232: Connects the display device (e.g, projector) to be controlled by a far-end control device or connects a control device (e.g.,PC) to control a farend source device (e.g,. camera)
- Power LED: Illuminates green when power is applied
- HDBaseT In: The RJ45 port is connected to the HDBaseT output port of the transmitter by a CAT6a Ethernet cable. The LINK LED illuminates when there is a valid HDBaseT link between the transmitter and receiver. The HDCP LED illuminates when the video contains HDCP content or blinks when the video is transmitted without HDCP content.
- DC 24V: DC Connector for the power adapter connection.
Specifications
| Transmitter | |
| Input | HDMI IN (19-pin type-A female HDMI) |
| Output | HDBaseT OUT (RJ45) |
|
Control |
ETHERNET (RJ45),
RS-232 (3-pin terminal block) |
| Power Output | CAM 12V (2-pin terminal block) |
| Receiver | |
| Input | HDBaseT IN (RJ45) |
| Output | HDMI OUT (19-pin type-A female HDMI) |
| Control | ETHERNET (RJ45)
RS-232 (3-pin terminal block) |
| General | |
| Video Resolution | Up to 4K@60Hz 4:2:0 |
| Transmission Distance | 4K/1080p ≤ 328 feet (100m) |
| HDMI Version | 1.4 |
| HDCP Version | Up to 2.2, bypass |
| EDID | Bypass |
| Power Supply | Input: 100 to 240V AC, 50/60Hz
Output: DC 24V, 2.71A |
| Maximum Power Consumption | 62W |
| Operation Temperature | 23 ~ 131°F (-5 ~ 55°C) |
| Storage Temperature | -13 ~ 158°F (-25 ~ 70°C) |
| Relative Humidity | 10% ~ 90%, Non-condensing |
| Dimensions (W*H*D) | 3.94” (100mm) x 0.94” (24mm) x 6.29” (160mm) |
| Net Weight | TX: 0.82 lbs. (370g)
RX: 0.84 lbs. (380g) |
Frequently Asked Questions
Q: What is the maximum distance supported by the HDMI extender?
A: The HDMI extender can support distances up to 328 feet (100 meters) over a single CAT6a cable.
Documents / Resources
 |
TEKVOX TPUH460 HDMI 1.4 Extender with Ethernet [pdf] User Manual TPUH460, 79086-S, TPUH460 HDMI 1.4 Extender with Ethernet, TPUH460, HDMI 1.4 Extender with Ethernet, Extender with Ethernet, with Ethernet |