TEKBOX TBJT02 Injection Transformer User Manual
1. Introduction
The TBJT02 is a wideband injection transformer for control loop stability measurements. It provides galvanic isolation between the swept signal source and the control loop. The injection transformer is internally terminated with a 5 Ohm resistor and protected with a 100 mA fuse. The usable frequency range is 1 Hz to 7 MHz.
Picture 1: TBJT02 injection transformer
2. Specification
3. Frequency response
Figure 1: typical insertion loss
4. Application
The control loop is commonly broken at the point between the amplifier output and the input of the feedback network:
The isolation transformer is inserted into the control loop and connected to the Bode-Analyzer:
5. Ordering Information
6. History
www.tekbox.com
TekBox Digital Solutions Vietnam Pte. Ltd.
Factory 4, F4, Lot I-3B-1, Saigon Hi-Tech Park, Tan Phu Ward, District 9, Ho Chi Minh City, Vietnam
Read More About This Manual & Download PDF:
Documents / Resources
 |
TEKBOX TBJT02 Injection Transformer [pdf] User Manual TBJT02 Injection Transformer, TBJT02, Injection Transformer, Transformer |