TeeJet TECHNOLOGIES MATRIX 430 GPS System User Guide

TeeJet TECHNOLOGIES MATRIX 430 GPS System User Guide

Contents hide

1 SETUP THE CONSOLE

2 SETUP GUIDANCE

3 GUIDANCE SCREEN OPTIONS

4 Documents / Resources

4.1 References

5 Related Posts

SETUP THE CONSOLE

On guidance screen, press NAVIGATION AND GUIDANCE OPTIONS tab to display options.
Press HOME button .

Press CONSOLE button . Adjust settings as needed.
- LCD Brightness
- Colour Scheme
- Units
- GNSS Demo Mode
- Screenshot
- Time Zone
  CONFIGURE THE MACHINE
From the Home screen , press CONFIGURATION button .

Select and configure a Machine profile .
- Select Machine Profile Number A – use to select 1 of 5 machine profiles. The profile that is “active” is displayed/active on the operation screen.
- Set Number of Implement Sections B – used to select the number of implement sections. Range is 1 to 7 sections.
- Set Section Widths C – used to enter the width of each section. Each section can be a different width.
- Set Lateral Implement Offset Distance D – used to define the lateral distance from the centre line of the machine to the centre of the implement.
  - Positive value will move the implement to the right of centre while facing in the machine’s forward direction.
  - Negative value will move the implement to the left of centre while facing in the machine’s forward direction.
- Set In-Line Implement Offset Distance E – used to define the in-line distance from the GNSS antenna (the zero point) to the implement.
  - Positive value will move the implement behind the GNSS antenna.
  - Negative value will move the implement in front of the GNSS antenna.

Select Lighbar Spacing – used to set the distance away from the guideline or vehicle each guidance screen lightbar box represents.
Set GNSS configuration . GPS uncorrected signals from the GPS system are always available and cannot be disabled.
- Set SBAS Usage F – used to select if any satellite-based differential
  correction system (SBAS) will be used.
- Select Minimum Position Quality Requirement G – used to select between using ClearPath® or SBAS.
- Select Additional Constellations H – used to Indicated when the GLONASS or QZSS uncorrected signals are available.
  NOTE: When using the Matrix 430 in Europe, always include GLONASS. Use SBAS (EGNOS) where applicable.

SETUP GUIDANCE

From the Home screen , press GUIDANCE button .

Establish desired Selectable Guidance Bar Information.
- Speed
- Total Applied Area
- Application Time
- Swath Number
On vehicle view guidance screen, from the NAVIGATION AND GUIDANCE OPTIONS tab , select Guidance mode
- Straight AB guidance
- Last pass guidance
- No guidance
- Curved AB guidance
- Circle pivot guidance
- NextRow guidance
On vehicle view guidance screen, from the NAVIGATION AND GUIDANCE OPTIONS tab , create boundary
Create AB guideline .

GUIDANCE SCREEN OPTIONS

Application Mapping – press VEHICLE icon in the centre of the guidance screen to turn on or off application mapping.
Return to Point – set a return point to provide guidance back to the established point.
A+ Nudge Feature – allows the current guideline to be shifted to the vehicle’s current location.
Transport Mode – recommended for use when traveling between fields as this will improve accuracy in guidance functions.

Copyrights
© 2023 TeeJet Technologies. All rights reserved. No part of this document or the computer programs described in it may be reproduced, copied, photocopied, translated, or reduced in any form or by any means, electronic or machine readable, recording or otherwise, without prior written consent from TeeJet Technologies.

Trademarks
Unless otherwise noted, all other brand or product names are trademarks or registered trademarks of their respective companies or organizations.

Limitation of Liability
TEEJET TECHNOLOGIES PROVIDES THIS MATERIAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED. NO COPYRIGHT LIABILITY OR PATENT IS ASSUMED. IN NO EVENT SHALL TEEJET TECHNOLOGIES BE LIABLE FOR ANY LOSS OF BUSINESS, LOSS OFPROFIT, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS, OR FOR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND, EVEN IF TEEJET TECHNOLOGIES HAS BEEN ADVISED OF SUCH DAMAGES ARISING FROM TEEJET TECHNOLOGIES SOFTWARE