TECHNQUE More Torque Adaptor
Product Information
- Product Name: ‘More Torque’ Adaptor for TDI Starters – Automatic
- Compatibility: TDI starters
- Usage: Increase torque for TDI starters
Product Usage Instructions
Installation:
- Remove the old starter.
- Remove the original lower starter mounting stud from the bell housing using vise grips or a stud removal tool.
- Install the starter adaptor using the flat-head cap screw.
Additional Tips:
- Using the optional pigtail will result in a sealed and locked connection when combining the two small starter wires.
Note:
- Some starters may have a short stud for the power cables. If this is the case, you will need to trim the thickness of the alternator cable end or replace it with a crimp-on ring terminal end.
Overview
The TECHNQUE More Torque Adaptor is a heavy-duty tool designed to increase torque output when working with stubborn, rusted, or overtightened fasteners.
Built from durable, heat-treated alloy steel, it allows users to remove or tighten bolts with less effort and greater precision.
Its compact design makes it easy to carry and use in tight spaces, while the universal 1/2″ drive compatibility ensures it works with most ratchets, breaker bars, and impact tools.
Ideal for automotive repair, industrial maintenance, construction tasks, and DIY projects, this adaptor offers the extra power needed to complete tough jobs safely and efficiently.
Features
- Enhanced Torque Output – Multiplies torque to loosen or tighten difficult bolts with minimal effort.
- Heavy-Duty Steel Construction – Made from heat-treated alloy steel for long-term durability and high load resistance.
- Universal 1/2″ Drive Fit – Compatible with most 1/2″ ratchets, torque wrenches, and breaker bars.
- Smooth Gear Mechanism – Precision-cut gears ensure smooth rotation and stable torque transfer without slipping.
- Compact & Portable – Small, lightweight design fits easily into any tool bag for on-the-go use.
- Safe Tool Protection – Reduces stress on primary tools, preventing damage caused by excessive force.
- Wide Application – Ideal for automotive work, machinery repair, construction, and home maintenance.
- Slip-Free Operation – Designed to keep sockets secure and maintain grip during heavy tasks.
- Corrosion-Resistant Finish – Protects the adaptor from rust and wear, even in harsh working conditions.
- User-Friendly Design – Easy to attach, use, and remove, suitable for beginners and professionals.
Specifications
| Category | Details |
|---|---|
| Product Name | TECHNQUE More Torque Adaptor |
| Material | Heat-treated alloy steel |
| Drive Size | 1/2″ (Universal Fit) |
| Torque Function | Torque multiplier adaptor |
| Gear Type | Precision-cut internal gears |
| Finish | Corrosion-resistant coating |
| Weight | Lightweight, portable design |
| Usage | Automotive, industrial, construction, home repair |
| Compatibility | Ratchets, breaker bars, torque wrenches, and impact tools |
| Safety | Designed to reduce stress on primary tools |
| Durability Rating | Heavy-duty, high load capacity |
| Operation | Manual with smooth rotational action |
Installation Instruction
- Remove the old starter
- Remove the original lower starter mounting stud from the bell housing using vise grips or a stud removal tool
- Install the starter adaptor using the flat-head cap screw supplied into the lower bolt hole.
- Reinstall the stock upper bolt and nut if you are installing the adaptor to a stock WBX van, or if it is a conversion using a Kennedy adaptor plate with stud, use the flange nut supplied.
- Use only TDI starters from 1996-2003 manual-trans USAmodels, VW part # 02A911023R, 02A911024, or SR-0408X or SR409X remanufactured Bosch.
- The SR0425N is also a great option for gasoline engines, with slightly lower torque output.
- Install the starter to the adaptor using bolts and flat washers supplied, and reconnect wires.
- There will be two small red wires on the original starter connection. Combine these to produce a single spade terminal connection for the new starter.
Recommended: Using the optional pigtail will result in a sealed and locked connection when combining the two small starter wires.
Note: Some starters will have a short stud for the power cables.
- If this is the case, you will need to trim the thickness of the alternator cable end or replace it with a crimp-on ring terminal end.
More Info
- Please contact us
FAQ
Q: Is this adaptor compatible with all TDI starters?
Q: Do I need any special tools for installation?
Documents / Resources
 | More Torque Adaptor |
References
- User Manualmanual.tools