GEN II LED Linear Light
“
Product Specifications:
| No. | Size | A (in) | B (in) | C (in) | D (in) | E (in) |
|---|---|---|---|---|---|---|
| 1 | 2FT | 3.346 | 18.858 | 3.346 | / | / |
| 2 | 4FT | 3.346 | 42.480 | 3.346 | / | / |
| 3 | 6FT | 3.346 | 66.102 | 3.346 | / | / |
| 4 | 8FT | 3.346 | 43.189 | 3.346 | 43.189 | 3.346 |
Product Usage Instructions:
Mounting Instructions:
The suspension mount should be securely fixed to the aircraft
using the provided screw nut and thread locker. Ensure the
waterproof connector is passed through the gasket and canopy and
fixed with a screw nut.
Electrical Wiring Instructions:
Pass the AC wire into the waterproof connector and secure it
with a screw cap. Connect the L pole to the black wire, N pole to
the white wire, GND to the green wire, DIM+ pole to the purple
wire, and DIM- pole to the pink wire.
Linkable Fixtures Instructions:
In order to link fixtures, make sure that the quantity meets the
specified conditions based on input voltage and wattage per fixture
as mentioned in the manual.
Frequently Asked Questions (FAQ):
Q: How many wiring points are required for the splicing
diagram?
A: The splicing diagram requires more than two AC inlet wiring
points for proper installation.
Q: How should the fixtures be linked together?
A: To link fixtures together, ensure that the quantity meets the
conditions specified in the manual based on input voltage and
wattage per fixture.
“`
014-0004-0013 A5
A Aircraft Suspension Mount
No.
Size
A(in)
B(in)
1
2FT 22.205
/
2
4FT 45.827
/
3
6FT 69.449
/
4
8FT 46.535 46.535
B
N0. Size A(in) B(in) C(in) D(in) E(in)
1
2ft 3.346 18.858 3.346
/
/
2
4ft 3.346 42.480 3.346
/
/
3
6ft 3.346 66.102 3.346
/
/
4
8ft 3.346 43.189 3.346 43.189 3.346
5.The thread locker passes through the canopy and is fixed with a screw nut, and the waterproof connector passes through the gasket and the canopy, and is fixed with a screw nut
C
A
B
C
D
No. Size A(in) B(in) C(in) D(in)
Remark
1 2FT 22.920 23.630 22.920 / 3pcs linkable diagrammatic drawing
2 4FT 46.540 47.250 46.540 / 3pcs linkable diagrammatic drawing
3 6FT 70.160 70.870 70.160 / 3pcs linkable diagrammatic drawing
4 8FT 46.540 47.250 47.250 46.540 2pcs linkable diagrammatic drawing
7.Pass the AC into the waterproof connector, fix the AC wire with a screw cap, connect the L pole to the black wire, the N pole to the white wire, the GND to the green wire, the DIM+ pole to the purple wire, and the DIM- pole to the pink wire
Clip Buckle Solution Pull Buckle Solution
Clip Buckle Solution
Pull Buckle Solution
Clip Buckle Solution
Pull Buckle Solution
D Wall Mount (Type-C)
E
No. Size A(in) B(in) C(in)
1 2FT 18.898 /
/
2 4FT 42.520 /
/
3 6FT 25.984 14.173 25.984
4
8FT 37.795 14.173 37.795
F T-grid Recessed Mount with Frange
G Frange Recessed Mount with Clips
H E-Series
I
J
7
Linkable fixtures Qty need to meet the below two conditions: 1) N7pcs 2) Input voltage = 120V , N*P420W Input voltage = 277V , N*P960W Input voltage = 347V, N*P1200W
Note: N = Qty of linkable fixtures, P = Wattage per fixture
This splicing diagram requires more than two AC inlet wiring points.
8
Documents / Resources
 |
Technilight GEN II LED Linear Light [pdf] Installation Guide 014-0004-0013 A5, 014-0004-0013 A5, 014-0004-0013 A5, GEN II LED Linear Light, LED Linear Light, Linear Light, Light |