TECHE 360STAR PC Control Software User Guide

TECHE-LOGO

TECHE 360STAR PC Control Software

TECHE-360STAR-PC-Control-Software-PRODUCT

Specifications

  • CPU: Intel Core i7 or equivalent
  • RAM: 8GB
  • GPU: GTX 1060 (8GB VRAM)
  • OS: Windows 10 64-bit or newer

Product Overview

TECHE Centre is the official control software for TECHE 360STAR cameras.

It enables:

  • Wireless/wired camera control for VR live streaming.
  • Real-time parameter adjustments.
  • Streamlined management of camera operations.

User Guide

  1. Launch the software and ensure the camera and PC share the same network.
  2. Select the detected device and click Connect to enter the main interface.

Live Streaming Mode

  • Activates high-resolution VR streaming (icon turns blue when enabled).

Basic Settings

  • Configure parameters with real-time preview feedback.

Live Streaming Parameters

  • RTMP Server: Enter push URL for external platforms.
  • RTSP URLs: Auto-generates fixed/dynamic/Wi-Fi IP addresses.
  • White Balance: Auto/Incandescent/Daylight/Fluorescent/Cloudy/Manual.

Start/Stop Shooting

  1. Click the shutter button (colour-coded by mode):
    • White: Idle
    • Blue: Burst shot
    • Red: Video/Live streaming.
  2. Click again to stop. Saved files appear in the media panel.

Menu Settings

  1. IP Configuration: Set static IP or enable DHCP.
  2. Delay: 5s to custom.
  3. Firmware Update: Click Help to upgrade.

Product Overview

TECHE Centre is the official control software for TECHE 360STAR cameras.

It enables:

  • Wireless/wired camera control for VR live streaming.
  • Real-time parameter adjustments.
  • Streamlined management of camera operations.

System Requirements

(Supports GPU-free operation; playback not supported.)

Hardware Minimum Specs

  • CPU Intel Core i7 or equivalent
  • RAM 8GB
  • GPU GTX 1060 (8GB VRAM)
  • OS Windows 10 64-bit or newer

Interface Guide

a) Layout Overview

  • After connecting the camera, the main interface includes.
  • Menu Bar: Language, IP settings, password, firmware updates.
  • Camera Info Panel: Displays connected device details.
  • Media Manager: Review/download/delete recorded files.
  • Live Preview: Real-time monitoring.
  • Shooting Controls: Start/stop capture.
  • Parameter Settings: Resolution, exposure, etc.

b) Feature List

  • Device detection
  • Live streaming (RTMP/RTSP/GB28181)
  • Exposure/white balance adjustments
  • Day/night mode switchingTECHE-360STAR-PC-Control-Software-FIG-1

User Guide

a) Device Connection

  1. Launch the software and ensure the camera and PC share the same network.
  2. Select the detected device and click 【Connect】 to enter the main interface.TECHE-360STAR-PC-Control-Software-FIG-2

b) Live Streaming Mode

  • Activates high-resolution VR streaming (icon turns blue when enabled).

c) Basic Settings

  • Configure parameters with real-time preview feedback.

d) Live Streaming ParametersTECHE-360STAR-PC-Control-Software-FIG-3

  1. Protocols: RTMP / RTSP / GB28181.
  2. Auto-Push: Resume streaming on startup.
  3. Scene: Indoor/Outdoor.
  4. Stitching: In-camera processing.
  5. Resolution: 8K (7680×3840) or 4K (3840×1920).
  6. Frame Rate: 30FPS.
  7. Bitrate: 0–60Mbps (adjust per network bandwidth).
  8. Audio Gain: On/Off.TECHE-360STAR-PC-Control-Software-FIG-4
  9. RTMP Server: Enter push URL for external platforms.
  10. RTSP URLs: Auto-generates fixed/dynamic/Wi-Fi IP addresses.TECHE-360STAR-PC-Control-Software-FIG-5

e) Image Parameters

  1. Exposure Modes: Auto/ISO Priority/Shutter Priority/Manual.
    • EV Range: -5 (dark) to +5 (bright).
    • ISO Limit: 100–6400.
    • Shutter Speed: 1/30s to 1/8000s.TECHE-360STAR-PC-Control-Software-FIG-6
  2. White Balance:
    • Auto/Incandescent/Daylight/Fluorescent/Cloudy/Manual.TECHE-360STAR-PC-Control-Software-FIG-7

f) Start/Stop Shooting

After the camera is set up properly, you’re ready to go.

  1. Click the shutter button (colour-coded by mode)
    • White: Idle
    • Blue: Burst shot
    • Red: Video/Live streaming.
  2. Click again to stop. Saved files appear in the media panel.TECHE-360STAR-PC-Control-Software-FIG-8

g) Menu Settings

  1. IP Configuration:
    • Set a static IP or enable DHCP.TECHE-360STAR-PC-Control-Software-FIG-9
  2. Day/Night Mode:
    • Auto: Light-dependent switching.
    • Day: Colour mode (IR off).
    • Night: B&W mode (IR on).
    • Schedule: Custom timing.
    • Sensitivity: 0–4.
    • Delay: 5s to custom.TECHE-360STAR-PC-Control-Software-FIG-10
  3. Firmware Update: Click Help to upgrade.TECHE-360STAR-PC-Control-Software-FIG-11

CUSTOMER SERVICE

  • TECHE CHINA – Life Pal Limited
  • Web: www.techechina.com
  • Email: support@techechina.com
  • Tel: +85260618656
  • Mob: +8618621587850
  • Hong Kong: Rooms 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon Mainland China: 23F, Changfeng Mansion, No. 26-2 Pangjiang Street, Dafeng District, Shenyang, Liaoning

FAQ

What are the minimum system requirements for using the TECHE Center software?

The minimum system requirements include an Intel Core i7 or equivalent CPU, 8GB of RAM, a GTX 1060 GPU with 8GB VRAM, and Windows 10 64-bit or newer OS.

How can I start live streaming with the TECHE 360STAR camera using this software?

To start live streaming, first ensure your camera and PC are on the same network, then select the device in the software and click Connect to enter the main interface. Activate high-resolution VR streaming mode and configure the necessary parameters before starting the stream.

Documents / Resources

PDF thumbnail360STAR PC Control Software
User Guide · 360STAR PC Control Software, Control Software, Software

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.