TECH PPS-01 Relay Module for Electrical Box
Important Information
The PPS-01 module is an electronic device equipped with a voltage-free relay that allows the user to control 230V or 24V circuits. It is intended to be mounted in an electrical box.
It communicates with the Sinum central device using radio signal.
How to register the device in the sinum system
Enter the address of the Sinum central device in the browser and log in to the device. In the main panel, click the Settings > Devices > Wireless devices > 
. Then briefly press the registration button (1) on the device. After a properly completed registration process, an appropriate message will appear on the screen. Additionally, the user can name the device and assign it to a specific room.
Technical data
| Power supply | 230V ±10% /50Hz |
| Max. power consumption | 1W |
| Rated load of the voltage-free contact Q1 | 230V AC / 0,5A (AC1)* 24V DC / 0,5A (DC1)** |
| Operation temperature | 5 ÷ 50°C |
| Operation frequency | 868 MHz |
| Max. transmission power | 25 mW |
* AC1 load category: single-phase, resistive or slightly inductive AC load
** DC1 load category: direct current, resistive or slightly inductive load.
Notes
TECH Controllers is not responsible for any damages resulting from improper use of the system. The range depends on the conditions in which the device is used and the structure and materials used in the object construction. The manufacturer reserves the right to improve devices, update software and related documentation. The graphics are provided for illustration purposes only and may differ slightly from the actual look.
The diagrams serve as examples. All changes are updated on an ongoing basis on the manufacturer’s website.
Before using the device for the first time, read the following regulations carefully. Not obeying these instructions may lead to personal injuries or controller damage. The device should be installed by a qualified person. It is not intended to be operated by children.
It is a live electrical device. Make sure the device is disconnected from the mains before performing any activities involving the power supply (plugging cables, installing the device etc.). The device is not water resistant.
The product may not be disposed of to household waste containers.
The user is obliged to transfer their used equipment to a collection point where all electric and electronic components will be recycled.
EU Declaration of conformity
Tech Sterowniki II Sp. z o.o. ul. Biała Droga 34, Wieprz (34-122) Hereby, we declare under our sole responsibility that the module PPS-01 is compliant with Directive 2014/53/EU.
Wieprz, 01.10.2023
The full text of the EU declaration of conformity and the user manual are available after scanning the QR code or at www.tech-controllers.com/manuals
CUSTOMER SUPPORT
www.sinum.ru
www.techsterowniki.pl/manuals Wyprodukowano w Polsce
www.tech-controllers.com/manuals Made in Poland
Documents / Resources
 |
TECH PPS-01 Relay Module for Electrical Box [pdf] Owner's Manual PPS-01, PPS-01 Relay Module for Electrical Box, Relay Module for Electrical Box, Module for Electrical Box, Electrical Box, Box |