The multifunctional smart button BT-01 is a wireless device whose functions are configured from the level of the Sinum central device. The user can assign a different action to each button sequence thus controlling any devices and automations. The control involves pressing the main button a certain number of times or holding it for a specified time (the number of presses and the duration of holding are configured in the Sinum central device). Holding or pressing the button is accompanied by an audible signal.
Description
- Registration button
- Control light
- Main button
How to register the device in thesinusm system
Enter the address of the Sinum central device in the browser and log in to the device. In the main panel, click the Settings > Devices > Wireless devices > +. Then briefly press the registration button 1 on the device. Two short beeps mean that the registration has been successful – an appropriate message will appear on the screen. One continuous sound signal means that a registration error has occurred. After correct registration, the user can give a name to the device and assign it to a specific room.
Technical data
- Power supply 1x battery CR2450
- Operation temperature 5 ÷ 50°C
- Acceptable ambient relative humidity <80% REL.H
- Operation frequency 868 MHz
- Max. transmission power 25 mW
Notes
TECH Controllers is not responsible for any damages resulting from improper use of the system. The range depends on the conditions in which the device is used and the structure and materials used in the object construction. The manufacturer reserves the right to improve devices, and pdate software a, nd related documentation. The graphics are provided for illustration purposes only and may differ slightly from the actual look. The diagrams serve as examples. All changes are updated on an ongoing basis on the manufacturer’s website.
Before using the device for the first time, read the following regulations carefully. Not obeying these instructions may lead to personal injuries or controller damage. The device should be installed by a qualified person. It is not intended to be operated by children. It is a live electrical device. Make sure the device is disconnected from the mains before performing any activities involving the power supply (plugging cables, installing the device, etc.). The device is not water resistant. The product may not be disposed of in household waste containers. The user is obliged to transfer their used equipment to a collection point where all electric and electronic components will be recycled.
EU Declaration of Conformity
Tech Sterowniki II Sp. z o.o. , ul. Biała Droga 34, Wieprz (34-122) Hereby, we declare under our sole responsibility that the smart button BT-01 is compliant with Directive 2014/53/EU. Wieprz, 01.12.2023.
The full text of the EU Declaration of Conformity and the user manual are available after scanning the QR code or at www.tech-controllers.com/manuals
Documents / Resources
 |
TECH BT-01 Multifunction Button [pdf] Instruction Manual BT-01 Multifunction Button, BT-01, Multifunction Button, Button |