F65 Keyboard
Product Information
Specifications:
- USB receiver
- Type-C
- Toggle switch (left 2.4G wired/OFF right BT)
Product Usage Instructions
Operating Instructions
2.4G Mode Connection:
- Toggle the switch to the 2.4G side.
- The cyan light of the Q key will flash slowly.
- Press and hold FN+Q for 3 seconds until the cyan light flashes
quickly to enter pairing state. - Insert the receiver to complete the pairing.
- The cyan light of the Q key will stay on for 2 seconds,
indicating successful 2.4G connection.
Note: Ensure to search first and then insert the receiver
when connecting to 2.4G. The factory setting default is already
paired.
Wired Mode Connection:
- Toggle the switch to the middle to turn off the keyboard.
- Insert the USB cable to switch to wired mode.
- The Y key will light up to indicate wired mode.
- Long press FN to check the current mode, and the corresponding
indicator will light up white.
Battery Check:
- FN key flashes red light = low battery
- FN key lights up red = charging
- FN key lights up green for 2 seconds = fully charged
- FN+B displays keyboard’s battery power level.
FAQ
Q: How do I know if the battery level is low?
A: The FN key will flash red when the battery level is low.
Q: How can I switch between wired and wireless modes?
A: Toggle the switch on the keyboard to switch between wired and
wireless modes.
Q: What should I do if the pairing process fails in 2.4G
mode?
A: Make sure to search first and then insert the receiver when
connecting in 2.4G mode. If the pairing fails, repeat the pairing
process.
Keyboard Function Description
USB receiver
Type-C
Toggle switch(left 2.4G wired/OFF right BT)
EN
Stylish design, 67 key layout, Gasket structure, delicate and soft touch. Keycaps and mechanical switches are pluggable.The users can also purchase various brands of switches and personalized keycaps on the market for free DIY. The keyboard material is solid and the buttons are responsive. Two stage tripod with concealed independent storage receiver. The user-friendly design of the keyboard, combined with the Fn key, adds a series of commonly used shortcut function buttons. Keyboard return rate: wired mode 1000Hz, 2.4G mode 1000Hz, BT mode 125Hz. The BT/2.4G/wired mode of the keyboard supports full key and no impact.
· Number of keys: 67 keys · Product size: 325.09×115.62×43.81±0.10mm · Product weight: About 804g · Charging voltage/current: DC 5V/800mA · Rated voltage: DC 3.7Vcfull 4.2V) · Capacity: 4000mAH or 8000mAH · Charging interface: Type-c · Operating system: Win XP/7/8/10,MAC/iOS/Android
Standard version shortcut key descriptions
Fn+
ESC
Combined Reset to factory
functions
setting
Fn+
E
Combined functions
BT 1#
Fn+
WIN-L
TAB Switching backlight
color R
BT 2#
Q 2.4G mode
T BT 3#
W
ASWD and arrow keys are swapped (W key
red light indicates)
CTRL-L
Switch between Number and F area
Y
Combined functions
Lock WIN
Backlight brightness+
Backlight brightness-
Wired mode
Fn+
U
I
O
DEL
Combined functions
PRTSC
SCRLK
PAUSE
INS
Fn+
END
|
Combined functions
HOME
Switching backlight mode
Backlight speed-
Backlight speed+
Fn+
R-Shift
B
.>
.>
Combined functions
Fn+
Switching side light effect
PGUP
Display power Switching side Switching side
level
light brightness light speed
PGDN
?/
Combined
functions
`
~
Switching side light color
· Press FN+ESC (hold 3s) to restore the factory default lighting mode. The previously connected Bluetooth device will not be cleared. · In the default factory settings, the keys `1!’to `=+’+ Fn = F1 to F12
Key
1
2
3
4
5
6
7
8
Single press
1
2
3
4
5
6
7
8
Fn combination
F1
F2
F3
F4
F5
F6
F7
F8
Key
9
0
-_
=+
Single press
9
Fn combination
F9
0
-_
=+
F10
F11
F12
· Press FN+left CTRL, the left CTRL red light is on, and the F area function and the number function are swapped.
Key
1
2
3
4
5
6
7
8
Single press
F1
F2
F3
F4
F5
F6
F7
F8
Fn combination
1
2
3
4
5
6
7
8
Key
9
0
-_
=+
Single press
9
Fn combination
F9
0
-_
=+
F10
F11
F12
Operating instructions
2.4G mode connection Toggle the switch the 2.4G sidethe cyan light of the Q key flashes slowly. Then press and hold FN+Q for 3 seconds and the cyan light flashes quickly to enter the pairing state. At this time, insert the receiver to complete the pairing. The cyan light of the Q key is on for 2s, and the 2.4G connection is successful.
*Note: Search first and then insert the receiver when connecting to 2.4G. The factory setting default is already paired.
Wired mode connection Toggle the switch to the middle to turn off the keyboard. Insert the USB cable to switch to wired mode. The Y key lights up. Long press FN to prompt the current mode. The corresponding indicator lights up white.
BT mode connection Toggle the switch to the BT mode make sure that the keyboard is under the BT mode: 1. Press Fn+E/R/T and the indicator light blinks in blue fast, the keyboard is ready to pair. 2. Turn on your BT device and find”AULA F65 BLE5.0/BLE3.0″, then connect. When the keyboard is connected to the BT device, the indicator stops flashing and the connection is done. 3. Press Fn+ E/R/T to toggle between the BT devices 1/2/3. When the Fn key is held, E/R/T key lights up in white to indicate the keyboard is connected to the corresponding BT device.
Battery check FN key flashes red light = low battery FN key lights up red = charging FN key lights up green for 2s = fully charged FN+B displays keyboard’s battery power level.”1!-0)” keys lights up green indicates battery percentage(for example,1!-6^ keys lights up green means 60% power.1-4$ lights up red when the battery level is below 40%.
KR
2.4G 2.4G Q . FN+Q 3 . . Q 2 2.4G . *: 2.4G . . . USB . . Y . FN . . BT BT BT : 1. Fn+E/R/T . 2. BT “AULA F65 BLE5.0/BLE3.0″ . BT . 3. Fn+ E/R/T BT 1/2/3 . Fn E/R/T BT . FN = FN = FN 2 = FN+B .”1!-0)” . (: 1!-6^ 60% ).1-4$ . 40% .
Instruções de utilização
PT
Ligação em modo 2.4G Alterne o interrutor para o lado 2.4G, a luz ciano da tecla Q pisca lentamente. Em seguida, prima e mantenha premido FN+Q durante 3 segundos e a luz ciano pisca rapidamente para entrar no estado de emparelhamento. Nesta altura, insira o recetor para concluir o emparelhamento. A luz ciano da tecla Q acende-se durante 2s, e a ligação 2.4G é bem sucedida. *Nota: Procure primeiro e depois insira o recetor quando ligar a 2.4G. A configuração de fábrica predefinida já está emparelhada. Ligação em modo com fios Coloque o interrutor no meio para desligar o teclado. Insira o cabo USB para mudar para o modo com fios. com fios. A tecla Y acende-se. Prima sem soltar FN para ver o modo atual. O indicador correspondente acende-se a branco. Ligação ao modo BT Comute o interrutor para o modo BT e certifique-se de que o teclado está no modo BT: 1. Prima Fn+E/R/T e a luz indicadora pisca rapidamente a azul, o teclado está pronto para emparelhar. 2. Ligue o seu dispositivo BT e encontre “AULA F65 BLE5.0/BLE3.0”, depois ligar. Quando o teclado estiver ligado ao dispositivo BT, o indicador pára de piscar e a ligação é efectuada. 3. Prima Fn+ E/R/T para alternar entre os dispositivos BT 1/2/3. Quando a tecla Fn é mantida premida, a tecla E/R/T acende-se a branco para indicar que o teclado está ligado ao dispositivo BT correspondente. dispositivo BT correspondente. Verificação da bateria A tecla FN pisca a vermelho = bateria fraca A tecla FN acende-se a vermelho = a carregar A tecla FN acende-se a verde durante 2s = totalmente carregada FN+B apresenta o nível de carga da bateria do teclado. As teclas “1!-0)” acendem a verde e indicam a percentagem da bateria percentagem da bateria (por exemplo, as teclas 1!-6^ acendem a verde significa 60% de energia.1-4$ acende a vermelho quando o nível da bateria está abaixo de 40%.
Instrucciones de uso
ES
Conexión en modo 2.4G Cambie el interruptor al lado 2.4G, la luz cian de la tecla Q parpadea lentamente. A continuación, mantenga pulsado FN+Q durante 3 segundos y la luz cian parpadeará rápidamente para entrar en el estado de emparejamiento. En este momento inserte el receptor para completar el emparejamiento. La luz cian de la tecla Q se enciende durante 2 s y la conexión 2.4G es correcta. *Nota: Busque primero y luego inserte el receptor cuando se conecte a 2.4G. El ajuste de fábrica de fábrica ya está emparejado. Conexión en modo cableado Coloque el interruptor en el centro para apagar el teclado. Inserte el cable USB para cambiar al modo con cable. La tecla Y se ilumina. Mantenga pulsada la tecla FN para consultar el modo actual. El indicador se ilumina en blanco. Conexión al modo BT Conmute el interruptor al modo BT y asegúrese de que el teclado está en modo BT: 1. Pulse Fn+E/R/T y la luz indicadora parpadea en azul rápidamente, el teclado está listo para emparejarse. 2. 2. Encienda su dispositivo BT y busque «AULA F65 BLE5.0/BLE3.0», luego conectar. Cuando el teclado esté conectado al dispositivo BT, el indicador deja de parpadear y la conexión se ha realizado. 3. Pulse Fn+ E/R/T para alternar entre los dispositivos BT 1/2/3. Cuando se mantiene pulsada la tecla Fn, la tecla E/R/T se ilumina en blanco para indicar que el teclado está conectado al dispositivo BT correspondiente. Comprobación de la batería La tecla FN parpadea en rojo = batería baja La tecla FN se ilumina en rojo = cargando La tecla FN se ilumina en verde durante 2 s = carga completa FN+B muestra el nivel de carga de la batería del teclado. (por ejemplo,1!-6^ teclas se ilumina en verde significa 60% de energía.1-4$ se ilumina en rojo cuando el nivel de batería es inferior al 40%.
Betriebsanleitung
DE
“Verbindung im 2.4G-Modus Schalten Sie den Schalter auf die 2.4G-Seite um, das cyanfarbene Licht der Q-Taste blinkt langsam. Drücken und halten Sie dann FN+Q 3 Sekunden lang gedrückt, und das blaugrüne Licht blinkt schnell, um den Kopplungsstatus zu aktivieren. Zu diesem Zeitpunkt, den Empfänger ein, um das Pairing abzuschließen. Das cyanfarbene Licht der Taste Q leuchtet 2 Sekunden lang und die 2.4G Verbindung ist erfolgreich. *Hinweis: Suchen Sie zuerst und legen Sie dann den Empfänger ein, wenn Sie eine 2.4G-Verbindung herstellen. Die Werkseinstellung Standardeinstellung ist bereits gepaart. Verbindung im kabelgebundenen Modus Schalten Sie den Schalter in die Mitte, um die Tastatur auszuschalten. Stecken Sie das USB-Kabel ein, um in den kabelgebundenen Modus zu wechseln. Die Taste Y leuchtet auf. Drücken Sie lange auf FN, um den aktuellen Modus aufzurufen. Die entsprechende Anzeige leuchtet weiß. Anschluss an den BT-Modus Schalten Sie den Schalter auf den BT-Modus um und stellen Sie sicher, dass sich die Tastatur im BT-Modus befindet: 1. Drücken Sie Fn+E/R/T und die Anzeigeleuchte blinkt schnell blau, die Tastatur ist bereit für die Kopplung. 2. Schalten Sie Ihr BT-Gerät ein und suchen Sie ,,AULA F65 BLE5.0/BLE3.0″, dann verbinden. Wenn die Tastatur mit dem BT-Gerät verbunden ist, hört die Anzeige hört die Anzeige auf zu blinken und die Verbindung ist hergestellt. 3. Drücken Sie Fn+ E/R/T, um zwischen den BT-Geräten 1/2/3 umzuschalten. Wenn Sie die Fn-Taste gedrückt halten, leuchtet die E/R/T-Taste weiß auf, um anzuzeigen, dass die Tastatur mit dem entsprechenden BT-Gerät verbunden ist. entsprechenden BT-Gerät verbunden ist.
Batteriekontrolle
FN-Taste blinkt rot = schwache Batterie FN-Taste leuchtet rot = Ladevorgang FN-Taste leuchtet 2s lang grün auf = voll aufgeladen FN+B zeigt den Batteriestand der Tastatur an. ,,1!-0)” leuchtet grün und zeigt den Prozent (z.B. 1!-6^ Tasten leuchten grün bedeutet 60% Leistung.1-4$ leuchtet rot wenn der Batteriestand unter 40% liegt.
Istruzioni per l’uso
IT
Collegamento in modalità 2.4G Posizionare l’interruttore sul lato 2.4G, la luce ciano del tasto Q lampeggia lentamente. Quindi tenere premuto FN+Q per 3 secondi e la luce ciano lampeggia rapidamente per entrare nello stato di accoppiamento. A questo punto, inserire il ricevitore per completare l’accoppiamento. La luce cieca del tasto Q rimane accesa per 2 secondi e la connessione 2.4G è riuscita. 4G è avvenuta con successo. *Nota: quando ci si connette al 2.4G, prima si cerca e poi si inserisce il ricevitore. L’impostazione di fabbrica di fabbrica è già accoppiato. Connessione in modalità cablata Portare l’interruttore al centro per spegnere la tastiera. Inserire il cavo USB per passare alla modalità modalità cablata. Il tasto Y si accende. Premere a lungo FN per visualizzare la modalità corrente. L’indicatore corrispondente si illumina di bianco. Collegamento alla modalità BT Attivare l’interruttore per la modalità BT e assicurarsi che la tastiera sia in modalità BT: 1. Premere Fn+E/R/T e l’indicatore luminoso lampeggia velocemente in blu: la tastiera è pronta per l’accoppiamento. 2. Accendere il dispositivo BT e trovare “AULA F65 BLE5.0/BLE3.0”, quindi collegarsi. connettersi. Quando la tastiera è collegata al dispositivo BT, l’indicatore smette di lampeggiare e la connessione è avvenuta. smette di lampeggiare e la connessione è avvenuta. 3. Premere Fn+ E/R/T per passare da un dispositivo BT all’altro. Quando si tiene premuto il tasto Fn, il tasto E/R/T si illumina di bianco per indicare che la tastiera è collegata al dispositivo BT corrispondente. dispositivo BT corrispondente. Controllo della batteria Il tasto FN lampeggia in rosso = batteria scarica Il tasto FN si illumina di rosso = in carica Il tasto FN si illumina di verde per 2s = batteria completamente carica FN+B visualizza il livello di carica della batteria della tastiera. (ad esempio, i tasti 1!-6^ si illuminano di verde per indicare il 60% di carica). 1-4$ si illumina di rosso quando il livello della batteria è inferiore al 40%. quando il livello della batteria è inferiore al 40%.
RU
2.4G 2.4G, Q . FN+Q 3 , , . , . Q 2 , 2.4G . *: 2.4G , . . , . USB, . Y. FN, . . BT BT , BT: 1. Fn+E/R/T, . 2. BT «AULA F65 BLE5.0/BLE3.0», . BT-, , . 3. Fn+ E/R/T BT- 1/2/3. Fn E/R/T , , BT. BT-. FN = FN = FN 2 = FN+B . «1!-0)» , (, 1!-6^ , 60% ). 1-4$ . 40%.
TH
2.4G 2.4G Q FN+Q 3 Q 2 2.4G *: 2.4G g
USB Y FN
BT BT BT:
Fn+E/R/T BT “”AULA F65 BLE5.0/BLE3.0″” BT Fn+E/R/T BT 1/2/3 Fn E/R/T BT FN = FN = FN 2 = FN+B “”1!-0)”” ( 1!-6^ 60% ) 1-4$ 40%
Mode d’emploi
FR
Connexion au mode 2.4G Basculer l’interrupteur du côté 2.4Gle voyant cyan de la touche Q clignote lentement. Ensuite, appuyez et maintenez FN+Q pendant 3 secondes et le voyant cyan clignote rapidement pour entrer dans l’état d’appairage. À ce moment-là, insérer le récepteur pour terminer l’appairage. Le voyant cyan de la touche Q s’allume pendant 2 secondes et la connexion 2.4G est réussie. *Note : Rechercher d’abord et insérer ensuite le récepteur lors de la connexion 2.4G. Le réglage d’usine par défaut est déjà apparié. Connexion en mode filaire Basculer l’interrupteur au milieu pour éteindre le clavier. Insérez le câble USB pour passer en mode câblé. pour passer en mode câblé. La touche Y s’allume. Appuyez longuement sur FN pour demander le mode actuel. Le voyant correspondant s’allume en blanc. Connexion au mode BT Basculez le commutateur en mode BT et assurez-vous que le clavier est en mode BT : 1. Appuyez sur Fn+E/R/T et le voyant lumineux clignote rapidement en bleu, le clavier est prêt à être couplé. 2. Allumez votre appareil BT et trouvez « AULA F65 BLE5.0/BLE3.0 », puis connectez. connectez. Lorsque le clavier est connecté à l’appareil BT, l’indicateur cesse de clignoter et la connexion est établie. cesse de clignoter et la connexion est établie. 3. Appuyez sur Fn+ E/R/T pour basculer entre les périphériques BT 1/2/3. Lorsque la touche Fn est maintenue, la touche E/R/T s’allume en blanc pour indiquer que le clavier est connecté au périphérique BT correspondant. au périphérique BT correspondant. Vérification de la batterie La touche FN clignote en rouge = batterie faible La touche FN s’allume en rouge = charge La touche FN s’allume en vert pendant 2 secondes = charge complète FN+B affiche le niveau de charge de la batterie du clavier. Les touches « 1!-0) » s’allument en vert pour indiquer le pourcentage de la batterie. de la batterie (par exemple, 1!-6^ touches s’allume en vert pour une puissance de 60%.1-4$ s’allume en rouge lorsque le niveau de la batterie est inférieur à 40 %.
UKR
2.4G 2.4G, Q . FN+Q 3 , , . , . Q 2 , ‘ 2.4G ‘ 2.4G . *: 2.4G , . . ‘ , . USB-, . Y . FN, . . BT BT , BT: 1. Fn+E/R/T, , ‘. 2. BT- «AULA F65 BLE5.0/BLE3.0», . BT-, , ‘ . 3. Fn+ E/R/T BT- 1/2/3. Fn , E/R/T , , ‘ BT-. FN = FN = FN 2 = FN+B . «1!-0)» , (, 1!-6^ , 60% ).1-4$ 40%.
Petunjuk pengoperasian
Indo
Koneksi mode 2.4G Alihkan sakelar ke sisi 2.4G, lampu cyan pada tombol Q berkedip perlahan. Kemudian tekan dan tahan FN+Q selama 3 detik dan lampu cyan berkedip cepat untuk masuk ke status pemasangan. Pada saat ini, masukkan receiver untuk menyelesaikan pemasangan. Lampu cyan pada tombol Q menyala selama 2 detik, dan 2.4G koneksi 2.4G berhasil. *Catatan: Cari terlebih dahulu, lalu masukkan receiver saat menyambungkan ke 2.4G. Pengaturan pabrik default sudah dipasangkan. Sambungan mode kabel Pindahkan sakelar ke tengah untuk mematikan keyboard. Masukkan kabel USB untuk beralih ke mode mode kabel. Tombol Y akan menyala. Tekan lama FN untuk menampilkan mode saat ini. Yang sesuai indikator yang sesuai menyala putih. Sambungan mode BT Mengalihkan sakelar ke mode BT, pastikan keyboard berada dalam mode BT: 1. Tekan Fn+E/R/T dan lampu indikator berkedip biru cepat, keyboard siap untuk dipasangkan. 2. Hidupkan perangkat BT Anda dan cari “AULA F65 BLE5.0/BLE3.0”, lalu sambungkan. Saat keyboard tersambung ke perangkat BT, indikator berhenti berkedip dan sambungan selesai. 3. Tekan Fn+ E/R/T untuk beralih di antara perangkat BT 1/2/3. Saat tombol Fn ditekan, tombol E/R/T akan menyala putih untuk menunjukkan bahwa keyboard telah tersambung ke perangkat BT yang sesuai. Pemeriksaan baterai Tombol FN berkedip lampu merah = baterai lemah Tombol FN menyala merah = pengisian daya Tombol FN menyala hijau selama 2 detik = terisi penuh FN+B menampilkan tingkat daya baterai keyboard. Tombol “1!-0)” menyala hijau menunjukkan baterai persentase (misalnya, tombol 1!-6^ menyala hijau berarti daya 60%). 1-4$ menyala merah bila tingkat baterai di bawah 40%.
Kullanim kilavuzu
TR
2.4G modunda balanti Anahtari 2.4G tarafina çevirin Q tuunun camgöbei iii yavaça yanip söner. Ardindan basin ve basili tutun Eletirme durumuna girmek için 3 saniye boyunca FN+Q tularina basin ve cam göbei iik hizlica yanip söner. u anda, Eletirmeyi tamamlamak için aliciyi takin. Q tuunun mavi iii 2 saniye boyunca yanar ve 2.4G balantisi baarilidir. *Not: 2.4G’ye balanirken önce arama yapin ve ardindan aliciyi takin. Fabrika ayari varsayilan zaten eletirilmitir. Kablolu mod balantisi Klavyeyi kapatmak için anahtari ortaya getirin. Kablolu balantiya geçmek için USB kablosunu takin modunda çaliir. Y tuu yanar. Geçerli modu sormak için FN tuuna uzun basin. Karilik gelen göstergesi beyaz yanar. BT modu balantisi Anahtari BT moduna getirerek klavyenin BT modunda olduundan emin olun: 1. Fn+E/R/T tularina basin ve gösterge iii mavi renkte hizlica yanip sönmeye balarsa klavye elemeye hazirdir. 2. BT cihazinizi açin ve “AULA F65 BLE5.0/BLE3.0 “i bulun, ardindan balanin. Klavye BT cihazina balandiinda, gösterge yanip sönmeyi durdurur ve balanti tamamlanir. 3. BT cihazlari 1/2/3 arasinda geçi yapmak için Fn+ E/R/T tularina basin. Fn tuu basili tutulduunda, klavyenin BT cihazina bali olduunu göstermek için E/R/T tuu beyaz renkte yanar. ilgili BT cihazi. Akü kontrolü FN tuu kirmizi iikta yanip söner = düük pil FN tuu kirmizi yaniyor = arj oluyor FN tuu 2 saniye boyunca yeil yanar = tam arjli FN+B klavyenin pil güç seviyesini gösterir. “1!-0)” tularinin yeil yanmasi pili gösterir yüzde (örnein, 1!-6^ tularinin yeil yanmasi %60 güç anlamina gelir.1-4$ kirmizi yanar pil seviyesi %40’in altina dütüünde.
JP
2.4G 2.4GQ FN+Q3 Q22.4G *2.4G USB YFN BT BTBT 1. Fn+E/R/T 2. BT AULA F65 BLE5.0/BLE3.0 BT 3. Fn+ E/R/TBT1/2/3 FnE/R/TBT BT FN = FN = FN2 FN+B 1-6^60
Documents / Resources
 |
Teamplush F65 Keyboard [pdf] Instruction Manual F65, F65 Keyboard, Keyboard |