వింటాక్ట్ హ్యాండ్‌హెల్డ్ ఎనిమోమీటర్ WT816 యూజర్ మాన్యువల్

1. పరిచయం

This manual provides detailed instructions for the proper use and maintenance of your Wintact Handheld Anemometer, Model WT816. This device is designed for accurate measurement of air velocity and temperature, making it suitable for various applications including HVAC system checks, outdoor activities like sailing and kite flying, and general environmental monitoring.

The WT816 is a compact, lightweight, and multifunctional tool featuring a high-precision pressure sensor, data hold function, and a backlit LCD screen for clear readings.

2 కీ ఫీచర్లు

• Fast & Accurate Measurement: Provides precise wind speed readings from 0.3 to 30 m/s with ±5% accuracy.
• ఉష్ణోగ్రత పర్యవేక్షణ: Measures air temperature from 14°F to 113°F (-10°C to 45°C) and displays wind chill.
• బహుళ యూనిట్లు: Supports m/s, ft/min, knots, km/h, and mph for wind speed, and Beaufort scale display.
• పోర్టబుల్ డిజైన్: Ultra-compact and lightweight (0.14lb) for easy carrying in a pocket or backpack.
• మల్టిఫంక్షనల్ డిస్ప్లే: Features a bright LCD screen with backlight, showing current, maximum (MAX), and average (AVG) wind speeds.
• మన్నిక: Equipped with an anti-slip, anti-fall rubber jacket for enhanced protection.
• సౌలభ్యం: Includes a low battery indicator and an auto power-off function.

3. ప్యాకేజీ విషయాలు

అన్ప్యాక్ చేసిన తర్వాత, దయచేసి క్రింద జాబితా చేయబడిన అన్ని వస్తువులు ఉన్నాయని మరియు మంచి స్థితిలో ఉన్నాయని నిర్ధారించుకోండి:

• 1x Wintact Anemometer (WT816)
• 1x 3.0V CR2032 battery (pre-installed or included separately)
• 1x వినియోగదారు మాన్యువల్
• 1x లాన్యార్డ్

4. సెటప్

4.1. బ్యాటరీ ఇన్‌స్టాలేషన్

The Wintact WT816 Anemometer uses one 3.0V CR2032 Lithium Metal battery. If the battery is not pre-installed or needs replacement, follow these steps:

1. Carefully remove the red rubber protective cover from the device.
2. Locate the circular battery compartment on the back of the unit.
3. Use a coin or a flat-head tool to twist the battery cover counter-clockwise to open it.
4. CR2032 బ్యాటరీని పాజిటివ్ (+) వైపు పైకి ఎదురుగా ఉండేలా చొప్పించండి.
5. Replace the battery cover by twisting it clockwise until secure.
6. Re-attach the red rubber protective cover.

4.2. లాన్యార్డ్‌ను అటాచ్ చేయడం

Thread the included lanyard through the designated loop at the bottom of the anemometer for secure handling and to prevent accidental drops.

5. ఆపరేటింగ్ సూచనలు

5.1. పవర్ ఆన్/ఆఫ్

• ఆన్ చేయడానికి: Press the "MODE" button for 2 seconds. The LCD will display air velocity, temperature, and battery icon. The backlight will activate for 12 seconds.
• ఆటో పవర్ ఆఫ్: The unit will automatically shut off after 14 minutes of no operation to conserve battery life.
• మాన్యువల్ పవర్ ఆఫ్: Press the "MODE" and "SET" buttons simultaneously to turn off the unit.

5.2. బ్యాక్‌లైట్ డిస్ప్లే

Press any button to activate the backlight for 12 seconds, improving visibility in low-light conditions.

5.3. Selecting Wind Speed Units

The anemometer supports five units of air velocity: meters per second (m/s), kilometers per hour (Km/h), feet per minute (ft/min), knots, and miles per hour (mph).

1. With the unit turned on, press the "MODE" button for more than 3 seconds until the current unit (e.g., "m/s") starts to blink.
2. Press the "SET" button repeatedly to cycle through the available units.
3. Once your desired unit is displayed, press the "MODE" button to confirm and save the selection.

5.4. Selecting Measurement Mode (Current, MAX, AVG, Wind Chill)

The WT816 can display current, maximum (MAX), and average (AVG) wind speeds, as well as wind chill.

1. After setting the desired air velocity unit (as described in 5.3), press the "SET" button repeatedly.
2. Cycle through the modes until "CU" (Current), "MAX" (Maximum), or "AVG" (Average) blinks. The wind chill value will be displayed when the temperature is below 0°C (32°F).
3. Press the "MODE" button to confirm your selection. The setting will be stored even after the unit is turned off.

5.5. Selecting Temperature Units (°C/°F)

To switch between Celsius (°C) and Fahrenheit (°F) for temperature display:

1. Remove the red rubber protective cover.
2. Locate the small push-button switch labeled °C/°F inside the rear cabinet, near the battery compartment.
3. Use a small pointed object (like a pen tip) to press this button to toggle between °C and °F.
4. Re-attach the rubber protective cover.

6. నిర్వహణ

6.1. శుభ్రపరచడం

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the impeller area is free from dust and debris for accurate readings.

6.2. బ్యాటరీ భర్తీ

When the low battery indicator appears on the LCD, replace the CR2032 battery by following the steps outlined in Section 4.1.

6.3. నిల్వ

Store the anemometer in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, it is recommended to remove the battery.

7. ట్రబుల్షూటింగ్

• No Display/Unit Not Turning On: బ్యాటరీ సరిగ్గా ఇన్‌స్టాల్ చేయబడిందో లేదో మరియు తగినంత ఛార్జ్ ఉందో లేదో తనిఖీ చేయండి. అవసరమైతే బ్యాటరీని మార్చండి.
• సరికాని రీడింగ్‌లు: Ensure the impeller is clean and unobstructed. Make sure the device is held in a clear airstream, away from your body or other objects that might interfere with airflow.
• Settings Resetting: This may indicate a loose battery connection. Ensure the battery is securely seated in its compartment and the cover is tightly closed.
• బ్యాక్‌లైట్ పని చేయడం లేదు: Check battery level. If the battery is low, the backlight may not function optimally.

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

9.1. వారంటీ సమాచారం

The Wintact Handheld Anemometer WT816 comes with a 12 నెలల వారంటీ from the date of purchase, covering manufacturing defects and workmanship. Please retain your proof of purchase for warranty claims.

9.2. కస్టమర్ మద్దతు

For any questions, technical assistance, or warranty inquiries, please contact the Wintact customer service team. They are available 24/7 to provide professional support.

• తయారీదారు: వింటాక్ట్
• ఇమెయిల్: wintact01@outlook.com
• Webసైట్: http://www.wintact.net