1. పరిచయం
The BEA Falcon is a sophisticated unidirectional motion sensor engineered to optimize the performance of automatic industrial doors. This sensor is designed to detect various targets and can be configured to filter out people, allowing for vehicle-only detection. This capability helps reduce door closing cycles by ignoring cross-traffic, leading to energy savings and improved operational efficiency.
The Falcon XL model, specifically, is suitable for mounting heights between 2 meters and 3.5 meters, providing a typical detection area of 4 x 2 meters. Its robust design ensures immunity against vibrations and environmental interferences, making it ideal for demanding industrial environments.
మూర్తి 1: ముందు view of the BEA Falcon XL Industrial Door Sensor. This image shows the compact, black housing of the sensor, designed for robust industrial applications.
2 కీ ఫీచర్లు
- Energy-saving Unidirectional Motion Detection: Optimizes door closing cycles by detecting motion in one direction, contributing to significant energy savings.
- People Filter: Allows configuration to detect vehicles only, ignoring pedestrian traffic, which is crucial for specific industrial applications.
- Cross-traffic Filter: Eliminates unwanted detections from traffic moving perpendicular to the door, enhancing operational accuracy.
- ప్లగ్ & ప్లే ఇన్స్టాలేషన్: Simplifies setup with basic functions adjustable via push buttons or remote control.
- Rugged Housing: Designed with IP65 degree of protection, ensuring durability and resistance to dust and water ingress in harsh industrial environments.
- రోగనిరోధక శక్తి: Provides strong immunity against vibrations and environmental interferences, ensuring reliable performance.
3. ఉత్పత్తి భాగాలు
The BEA Falcon sensor consists of several key components designed for easy installation and reliable operation. Refer to the diagram below for an overview of the main parts.
Figure 2: Diagram illustrating the main components of the BEA Falcon XL sensor.
- Push Buttons: For basic function adjustments.
- Front Face: The primary detection surface.
- Radar Antenna: Emits and receives microwave signals.
- Angle Indication: Visual indicator for tilt angle adjustment.
- Bracket: Mounting hardware for secure installation.
- Cable: For power and signal connection.
4. సెటప్ మరియు ఇన్స్టాలేషన్
The BEA Falcon XL sensor is designed for straightforward installation. Proper mounting and wiring are crucial for optimal performance and safety. It is recommended that installation be performed by qualified personnel.
4.1 మౌంటు పరిగణనలు
- మౌంటు ఎత్తు: For the Falcon XL, the recommended mounting height is between 2 meters and 3.5 meters.
- స్థానం: Mount the sensor in a position that provides an unobstructed view of the detection area, typically above the industrial door.
- కోణ సర్దుబాటు: Utilize the adjustable bracket and angle indication to precisely aim the sensor's detection field. The sensor allows for 0° to 180° vertical tilt angles.
4.2 Wiring and Power
- విద్యుత్ సరఫరా: The sensor operates on 12 V to 24 V AC ±10% (50 - 60 Hz) or 12 V to 24 V DC +30% / -10%. Ensure the power source matches these specifications.
- అవుట్పుట్ కనెక్షన్: The sensor provides a relay output (free of potential change-over contact). Connect this to the door control system according to the system's requirements. Max. contact voltage: 30V AC/42V DC, Max. contact current: 1A (resistive), Max. switching power: 30 W.
- కేబుల్ పొడవు: The sensor comes with a cable length of 10 or 15 meters for flexible installation.
4.3 ప్రారంభ కాన్ఫిగరేషన్
Basic functions can be adjusted using the integrated push buttons or a compatible remote control. Refer to the detailed product manual (not provided in this summary) for specific programming steps for features like people filtering and cross-traffic filtering.
Figure 3: Illustration of the detection fields for the BEA Falcon sensor in an industrial door application. This diagram shows how the sensor can differentiate between pedestrian and vehicle traffic, optimizing door operation.
5. ఆపరేషన్
Once properly installed and configured, the BEA Falcon XL sensor operates autonomously to detect motion within its defined field. The sensor's LED indicator provides visual feedback on its status.
5.1 Detection Mode
The sensor operates in motion detection mode. It identifies moving objects within its detection zone and triggers the door opening mechanism based on the configured parameters (e.g., presence of vehicles only).
5.2 LED సూచికలు
- ఎరుపు LED: Indicates detection state and parameter indication.
- ఆకుపచ్చ LED: Indicates value indication during configuration.
5.3 పనితీరును అనుకూలపరచడం
To ensure optimal performance, regularly verify that the detection field is clear of obstructions and that the sensor's lens is clean. The unidirectional detection and filtering capabilities contribute to efficient door operation and energy conservation.
6. నిర్వహణ
The BEA Falcon XL sensor is designed for minimal maintenance due to its robust construction and IP65 rating. However, periodic checks are recommended to ensure continued optimal performance.
- శుభ్రపరచడం: Periodically clean the sensor's front face and housing with a soft, damp వస్త్రం. రాపిడి క్లీనర్లు లేదా ద్రావకాలను నివారించండి.
- తనిఖీ: Visually inspect the mounting bracket and cable for any signs of wear, damage, or loosening. Ensure all connections are secure.
- ఫంక్షనాలిటీ టెస్ట్: Regularly test the sensor's detection capabilities by simulating traffic to ensure it triggers the door correctly and that filtering functions are active as configured.
No user-serviceable parts are inside the sensor housing. Do not attempt to open or repair the unit yourself. Contact qualified service personnel for any repairs.
7. ట్రబుల్షూటింగ్
This section provides basic troubleshooting steps for common issues. For more complex problems, consult a qualified technician.
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| సెన్సార్ కదలికను గుర్తించడం లేదు. | No power; obstructed detection field; incorrect sensitivity settings; sensor malfunction. | Check power supply and connections. Clear any obstructions. Adjust sensitivity settings. If problem persists, contact support. |
| Door opens for unwanted traffic (e.g., pedestrians). | People filter not activated or incorrectly configured; cross-traffic filter not active. | Verify and adjust the people filter and cross-traffic filter settings using push buttons or remote control. |
| LED సూచిక వెలగడం లేదు. | No power; faulty LED; internal issue. | Check power supply. If power is present and LED remains off, the unit may require service. |
| Intermittent detection. | Loose wiring; environmental interference; sensor position shifted. | Inspect wiring connections. Ensure sensor is securely mounted and not vibrating. Check for new sources of interference. |
8. సాంకేతిక లక్షణాలు
| పరామితి | విలువ |
|---|---|
| సాంకేతికత | మైక్రోవేవ్ డాప్లర్ రాడార్ |
| ట్రాన్స్మిటర్ ఫ్రీక్వెన్సీ | 24.150 GHz |
| ట్రాన్స్మిటర్ రేడియేటెడ్ పవర్ | <20 dBm EIRP |
| ట్రాన్స్మిటర్ పవర్ డెన్సిటీ | <5 mW/cm² |
| డిటెక్షన్ మోడ్ | చలనం |
| Detection Zone (FALCON XL) | 4 x 2 m (typical at 30° and field size 9) |
| కనిష్ట డిటెక్షన్ స్పీడ్ | 5 సెం.మీ./సె |
| సరఫరా వాల్యూమ్tage | 12 V to 24 V AC ±10% (50 - 60 Hz); 12 V to 24 V DC +30% / -10% |
| గరిష్ట విద్యుత్ వినియోగం | <2 W |
| అవుట్పుట్ రిలే | Free of potential change-over contact |
| గరిష్టంగా సంప్రదింపు వాల్యూమ్tage | 30V AC / 42V DC |
| గరిష్టంగా కరెంట్ని సంప్రదించండి | 1A (నిరోధకత) |
| గరిష్టంగా స్విచింగ్ పవర్ | 30 W |
| LED సిగ్నల్ | Red: detection state, parameter indication; Green: value indication |
| Mounting Height (FALCON XL) | 2 మీ - 3.5 మీ |
| రక్షణ డిగ్రీ | IP65 (IEC/EN 60529) |
| ఉష్ణోగ్రత పరిధి | -30 °C నుండి +60 °C |
| కొలతలు (L x H x W) | 127 mm x 102 mm x 96 mm |
| టిల్ట్ కోణాలు | 0° to 180° vertical |
| మెటీరియల్స్ | ABS and Polycarbonate |
| బరువు | 400 గ్రా |
| కేబుల్ పొడవు | 10 లేదా 15 మీ |
9. భద్రతా సమాచారం
Always observe the following safety precautions during installation, operation, and maintenance of the BEA Falcon XL sensor:
- అర్హత కలిగిన సిబ్బంది: ఇన్స్టాలేషన్ మరియు సర్వీసింగ్ను అర్హత కలిగిన మరియు అధీకృత సిబ్బంది మాత్రమే నిర్వహించాలి.
- పవర్ డిస్కనెక్ట్: Always disconnect power to the door system and sensor before performing any installation, wiring, or maintenance.
- విద్యుత్ భద్రత: Adhere to all local and national electrical codes. Ensure proper grounding and wiring.
- పర్యావరణ పరిస్థితులు: Do not expose the sensor to conditions outside its specified temperature and protection ratings.
- అసలు భాగాలు: ఒరిజినల్ లేదా ఆమోదించబడిన రీప్లేస్మెంట్ భాగాలను మాత్రమే ఉపయోగించండి.
10. వారంటీ మరియు మద్దతు
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your authorized BEA distributor. Keep your purchase receipt as proof of purchase.
