VEVOR Electric Hydraulic Car Jack (Model TY-01LEJ) - User Manual

1. పరిచయం

This manual provides comprehensive instructions for the VEVOR Electric Hydraulic Car Jack, Model TY-01LEJ. Please read and understand all safety warnings, instructions, and specifications before operating this product. Retain this manual for future reference.

The VEVOR Electric Hydraulic Car Jack is designed for lifting vehicles up to 5 tons (11000 lbs) for tire changes and minor under-vehicle maintenance. It features a cordless design, remote control operation, and integrated LED lighting for convenience and safety.

2. భద్రతా సూచనలు

హెచ్చరిక: ఈ సూచనలను పాటించకపోతే తీవ్రమైన గాయం లేదా ఆస్తి నష్టం సంభవించవచ్చు.

• Always operate the jack on a flat, stable, and level surface.
• Ensure the vehicle is in park (P) and the parking brake is engaged. Block the wheels that are not being lifted.
• 5 టన్నుల (11000 పౌండ్లు) రేట్ చేయబడిన లోడ్ సామర్థ్యాన్ని మించకూడదు.
• Position the jack head directly under the vehicle's designated lifting points. Refer to your vehicle's owner's manual for proper lifting points.
• Never work under a vehicle supported only by the jack. Always use appropriate jack stands to support the vehicle after lifting.
• Keep hands, feet, and other body parts clear of the jack and vehicle during lifting and lowering operations.
• Do not modify the jack or use it for purposes other than its intended use.
• పని ప్రదేశం నుండి పిల్లలను మరియు ప్రేక్షకులను దూరంగా ఉంచండి.
• If the accumulator is unused for an extended period, recharge every 2 months to maintain battery health.
• Ensure the jack is placed vertically with your vehicle.

3. ప్యాకేజీ విషయాలు

Verify that all items are present before initial use.

Figure 3.1: Included components of the VEVOR Electric Hydraulic Car Jack kit.

• 1 x Electric Hydraulic Jack
• 1 x AC110V-240V Adapter/Charger
• 1 x Power Pack (Lithium Battery)
• 1 x రిమోట్ కంట్రోల్
• 1 x జత చేతి తొడుగులు
• 1 x రెంచ్
• 1 x Tool Case
• 1 x Power Port Cover
• 1 x యూజర్ మాన్యువల్ (ఈ పత్రం)

4. స్పెసిఫికేషన్లు

Figure 4.1: Minimum and maximum lifting heights of the jack.

Figure 4.2: The jack is suitable for vehicles up to 5 tons, including sedans and SUVs.

5. సెటప్

1. బ్యాటరీని ఛార్జ్ చేయండి: Before first use, fully charge the lithium battery using the provided AC adapter. Connect the adapter to the jack's charging port and plug it into a standard wall outlet. The charging indicator will show the charging status. A full charge allows for approximately 10 lifts.


Figure 5.1: The jack's cordless power supply, including the 2000mAh lithium battery and AC110V-240V fast charger.

2. వాహనాన్ని సిద్ధం చేయండి: Park the vehicle on a firm, level surface. Engage the parking brake and place the transmission in "Park" (automatic) or a low gear (manual). Block the wheels that will remain on the ground to prevent accidental movement.
3. లిఫ్టింగ్ పాయింట్‌ను గుర్తించండి: Consult your vehicle's owner's manual to identify the correct lifting points for the jack. Improper placement can damage the vehicle or cause instability.
4. జాక్ ని ఉంచండి: Place the jack directly under the designated lifting point. Ensure the non-slip saddle on the jack head is centered and securely contacting the vehicle's lifting point. The jack must be placed vertically.


Figure 5.2: Proper placement of the electric hydraulic car jack under a vehicle.

6. ఆపరేటింగ్ సూచనలు

6.1 వాహనాన్ని ఎత్తడం

1. Ensure the jack is correctly positioned and the area is clear of obstructions and personnel.
2. Press the "Up" button on the jack's control panel or the remote control to begin lifting. The jack will extend, raising the vehicle.


Figure 6.1: Operating the jack using the wireless remote control from a distance of over 5 meters.

3. Monitor the lifting process. Stop lifting once the vehicle reaches the desired height, ensuring it is stable. The jack has a maximum lifting height of 17.7 inches (450 mm).
4. Once the vehicle is lifted, immediately place appropriate jack stands under the vehicle's frame at designated support points. Never rely solely on the jack for support.

6.2 వాహనాన్ని తగ్గించడం

1. Ensure the work area is clear.
2. Slightly lift the vehicle with the jack to relieve pressure on the jack stands, then carefully remove the jack stands.
3. Press the "Down" button on the jack's control panel or the remote control to slowly lower the vehicle.
4. వాహనం పూర్తిగా కిందకు దించి, దాని చక్రాలపై ఆనించిన తర్వాత, జాక్‌ను తీసివేయండి.

6.3 LED లైట్ ఉపయోగించడం

The jack is equipped with an LED light for illumination in low-light conditions. Press the light button on the jack's control panel to turn the LED light on or off. This is useful for emergency tire changes at night.

Figure 6.2: Key features of the jack, including the integrated LED lighting for visibility.

7. నిర్వహణ

• శుభ్రపరచడం: After each use, wipe down the jack with a clean, dry cloth to remove dirt, grease, and moisture.
• నిల్వ: Store the jack in its original tool case in a dry, clean, and secure location, away from direct sunlight and extreme temperatures.
• బ్యాటరీ సంరక్షణ: If the battery is not used for an extended period (more than 2 months), recharge it to maintain its capacity and lifespan.
• తనిఖీ: Periodically inspect the jack for any signs of damage, wear, or leaks. Do not use a damaged jack.
• సరళత: The hydraulic system is sealed and generally does not require user lubrication. If you suspect an issue, contact qualified service personnel.

8. ట్రబుల్షూటింగ్

9. వారంటీ మరియు మద్దతు

వారంటీ సమాచారం లేదా సాంకేతిక మద్దతు కోసం, దయచేసి మీ ఉత్పత్తితో చేర్చబడిన వారంటీ కార్డును చూడండి లేదా అధికారిక VEVOR ని సందర్శించండి. website. Please have your model number (TY-01LEJ) and purchase date available when contacting support.

తయారీదారు: VEVOR

మోడల్ సంఖ్య: TY-01LEJ ద్వారా మరిన్ని