బ్లేడ్ BLH3123

బ్లేడ్ 120SR బ్యాటరీ మౌంట్ ఇన్‌స్ట్రక్షన్ మాన్యువల్

Model: BLH3123

పరిచయం

This manual provides essential instructions for the installation, operation, and maintenance of your Blade 120SR Battery Mount (Part Number BLH3123). Please read this manual thoroughly before proceeding with any procedures to ensure proper function and longevity of the component.

భద్రతా జాగ్రత్తలు

  • Always disconnect the battery from the aircraft before performing any installation or maintenance.
  • Use appropriate tools to avoid damaging the component or surrounding parts.
  • చిన్న భాగాలను పిల్లలకు దూరంగా ఉంచండి.

ప్యాకేజీ విషయాలు

  • 1x Blade 120SR Battery Mount (BLH3123)
  • (Additional fasteners or components may be included depending on the specific kit)

సెటప్ మరియు ఇన్‌స్టాలేషన్

This section details the steps required to install the Blade 120SR Battery Mount onto your aircraft.

  1. తయారీ: Ensure the aircraft's power is off and the battery is disconnected. Place the aircraft on a stable, clean surface.
  2. Remove Old Mount (if applicable): Carefully unscrew and remove the existing battery mount from the aircraft chassis. Note the orientation and attachment points.
  3. Position New Mount: Align the new Blade 120SR Battery Mount (BLH3123) with the designated mounting points on the aircraft frame. Ensure the orientation matches the original component.
  4. సురక్షిత మౌంట్: Using the appropriate small screws (typically M1 or M2, not included with mount unless specified), gently secure the battery mount to the chassis. Do not overtighten screws, as this can strip the plastic or threads.
  5. ఇన్‌స్టాలేషన్‌ను ధృవీకరించండి: Gently tug on the installed mount to ensure it is firmly attached and does not wobble.
Blade 120SR Battery Mount (BLH3123)

Image: The Blade 120SR Battery Mount (BLH3123) showing its structure and mounting points. This component is designed to securely hold the battery in place on the Blade 120SR helicopter.

ఆపరేటింగ్ సూచనలు

Once the battery mount is installed, follow these steps to properly secure and use your battery.

  1. బ్యాటరీని చొప్పించండి: Slide the compatible battery into the designated slot on the battery mount. Ensure it fits snugly without excessive force.
  2. సురక్షిత బ్యాటరీ: If your aircraft model includes a battery strap or clip, use it to further secure the battery in the mount. This prevents movement during flight.
  3. బ్యాటరీని కనెక్ట్ చేయండి: Connect the battery's power lead to the aircraft's power connector.
  4. విమాన ప్రయాణానికి ముందు తనిఖీ: Before flight, always perform a visual inspection to confirm the battery is securely seated and the mount is intact.

నిర్వహణ

Regular inspection and maintenance will help prolong the life of your battery mount.

  • దృశ్య తనిఖీ: Periodically inspect the battery mount for any signs of cracks, stress marks, or deformation, especially after hard landings or impacts.
  • శుభ్రపరచడం: If necessary, gently clean the mount with a soft, dry cloth to remove dust or debris. Avoid using harsh chemicals.
  • ఫాస్టెనర్ తనిఖీ: Ensure all screws securing the mount are tight. Retighten if loose, but do not overtighten.
  • భర్తీ: If the mount shows significant wear, damage, or no longer holds the battery securely, replace it immediately with a genuine Blade BLH3123 part.

ట్రబుల్షూటింగ్

సమస్యసాధ్యమైన కారణంపరిష్కారం
Battery mount is loose.Mounting screws are loose or stripped.Tighten screws. If threads are stripped, consider using a slightly larger screw (if safe for the aircraft) or replacing the mount/chassis part.
Battery does not fit securely.Incorrect battery size or damaged mount.Ensure you are using the correct battery for the Blade 120SR. Inspect the mount for damage and replace if necessary.
Mount is cracked or broken.ప్రభావ నష్టం లేదా పదార్థ అలసట.Replace the battery mount with a new Blade BLH3123 part.

స్పెసిఫికేషన్లు

  • మోడల్: BLH3123
  • బ్రాండ్: బ్లేడ్
  • తయారీదారు: హారిజోన్ హాబీ
  • ఉత్పత్తి కొలతలు: 3 x 2 x 0.66 అంగుళాలు (7.62 x 5.08 x 1.68 సెం.మీ.)
  • వస్తువు బరువు: 0.16 ఔన్సులు (4.54 గ్రాములు)
  • సిఫార్సు చేసిన వయస్సు: 14 సంవత్సరాలు మరియు అంతకంటే ఎక్కువ
  • ASIN: B003TRNTCW

వారంటీ మరియు మద్దతు

For warranty information or technical support regarding your Blade 120SR Battery Mount, please contact Horizon Hobby directly. Refer to the official Horizon Hobby website or your product packaging for the most current contact details and warranty terms.

తయారీదారు: హారిజోన్ హాబీ

Webసైట్: www.horizonhobby.com

సంబంధిత పత్రాలు - BLH3123

ముందుగాview బ్లేడ్ సీలింగ్ ఫ్యాన్ కోసం ఇన్‌స్టాలేషన్ మరియు ఆపరేషన్ మాన్యువల్
బ్లేడ్ సీలింగ్ ఫ్యాన్‌ను ఇన్‌స్టాల్ చేయడం మరియు ఆపరేట్ చేయడం కోసం సమగ్ర గైడ్, ఇందులో భద్రతా సూచనలు, భాగాల జాబితా మరియు అసెంబ్లీ దశలు ఉన్నాయి.
ముందుగాview Blade TB-PR Transponder Bypass Install Guide for Honda Prelude and Acura RL
Comprehensive installation guide for the Blade TB-PR transponder bypass module, detailing wiring, programming, and diagnostics for Honda Prelude (1997-2001) and Acura RL (1998-2004) vehicles.
ముందుగాview బ్లేడ్ 120 S2 RC హెలికాప్టర్ ఇన్‌స్ట్రక్షన్ మాన్యువల్
బ్లేడ్ 120 S2 RC హెలికాప్టర్ కోసం సమగ్ర గైడ్, సెటప్, భద్రత, విమాన కార్యకలాపాలు మరియు ట్రబుల్షూటింగ్‌ను కవర్ చేస్తుంది. అభిరుచి గలవారి కోసం SAFE టెక్నాలజీ మరియు అధునాతన నియంత్రణల గురించి తెలుసుకోండి.
ముందుగాview బ్లేడ్ నానో S3 RC హెలికాప్టర్ ఇన్‌స్ట్రక్షన్ మాన్యువల్
This document provides comprehensive instructions for the Blade Nano S3 RC helicopter, covering setup, operation, safety precautions, troubleshooting, and maintenance. Learn to fly and care for your Nano S3 with this official guide from Horizon Hobby.
ముందుగాview బ్లేడ్ mCX2 ఇన్‌స్ట్రక్షన్ మాన్యువల్ - సెటప్, ఫ్లయింగ్ మరియు మెయింటెనెన్స్ గైడ్
బ్లేడ్ mCX2 RC హెలికాప్టర్ కోసం సమగ్ర సూచనల మాన్యువల్. హారిజన్ హాబీ నుండి సెటప్, విమాన నియంత్రణలు, భద్రతా జాగ్రత్తలు, ట్రబుల్షూటింగ్ మరియు విడిభాగాల భర్తీ గురించి తెలుసుకోండి.
ముందుగాview బ్లేడ్ mCP X BL 2 ఇన్‌స్ట్రక్షన్ మాన్యువల్ - హారిజన్ హాబీ
బ్లేడ్ mCP X BL 2 రిమోట్-కంట్రోల్డ్ హెలికాప్టర్ కోసం సమగ్ర సూచన మాన్యువల్, హారిజన్ హాబీ నుండి సెటప్, ఆపరేషన్, భద్రత, ట్రబుల్షూటింగ్ మరియు వారంటీ సమాచారాన్ని కవర్ చేస్తుంది.