PICO-2 Wireless Switch Panel
“
Specifications
- Product: Wireless Switch Panel PICO-2
- Usage: Indoor
- Power: DC
- Installation: Requires trained technician or electrician
Product Information
General Safety Instructions
Safety Instruction:
- Read the manual and product remarks before installation or
operation. - Abide by required electrical safety procedures to prevent
damage or injury. - Manufacturer is not responsible for consequences of not
following safety procedures.
General Precautions:
- Avoid exposing the product to dust, rain, snow, or liquids; it
is for indoor use only. - Ensure all cables are of the right gauge and properly connected
to prevent fire and electric shock.
Product Introduction
Open Box: Follow the manufacturer’s
instructions to open the product box.
Installation: Installation should be carried
out by a trained technician or electrician.
Specifications
The product specifications include indoor usage, DC power
supply, and the requirement for professional installation.
Product Usage Instructions
Installation Process
- Ensure correct voltage is used to power the product.
- Connect DC positive and negative correctly; no reverse polarity
connection allowed. - Use a short power cable for connection ensuring all connections
are secure. - Only trained technicians or authorized electricians should open
the case.
Maintenance and Troubleshooting
If any faults are found upon opening the product box, such as
housing swelling, contact the manufacturer or reseller immediately
for assistance.
Ensure the product is used in the appropriate environmental
conditions for optimal performance.
FAQ
Q: What should I do if I notice any issues with the product
upon opening the box?
A: If you find any faults like housing swelling, contact the
manufacturer or reseller promptly for assistance.
“`
User manual of wireless switch panel PICO-2
1
User manual of wireless switch panel PICO-2
Preface
Thanks for choosing our products and this manual is suitable for wireless switch panel PICO-2. This manual contains important safety and operation instructions. Read it before any operation/installation and keep it well for future reference. Product installation and maintenance need to be conducted by a well trained technician or electrician. Please pay more attention to below items:
1. Please use correct voltage to power this product
2. Please insure DC positive and negative are connected correctly. No reverse polarity connection is allowed
3. Please use power cable as short as possible for connection and ensure all connection is well
4. Only TBB engineer or authorized electrician can open the case.
All products has been well inspected before delivery from manufacturer. If there is faulty for example housing swelling is found when open product box, please contact TBB or TBB’s re-seller immediately. The environment condition will also has influence to product performance, please make sure product is used in proper environment condition
Remarks: As continuous update on product, this manual might not reflect latest version of product. Please contact TBB or TBB’s re-seller if wants to learn most update on product.
User manual of wireless switch panel PICO-2
Context
1. General Safety Instruction …………………………………………………………………………………………….. 1
1.1 Safety instruction……………………………………………………………………………………………. 1 1.2 General Precaution…………………………………………………………………………………………. 1 2. Product introduction …………………………………………………………………………………………………….. 2
2.1 General introduction………………………………………………………………………………………. 2 2.2 Features………………………………………………………………………………………………………….. 2 2.3 Product outlook and dimension …………………………………………………………………….. 2 3. Installation…………………………………………………………………………………………………………………….. 3
3.1 Open box ……………………………………………………………………………………………………….. 3 3.2 Installation……………………………………………………………………………………………………… 3 4. Specification ………………………………………………………………………………………………………………….. 4
1. General Safety Instruction
User manual of wireless switch panel PICO-2
1.1 Safety instruction
Please read this manual and remark, sticker on product before installation or operation
Please abide by required electrical safety procedure and requirement to prevent any damage or injury. Safety instruction in this manual is not equal to these safety procedure and requirement
Manufacturer takes no responsibility for any consequence of break above safety procedure or requirement
A warning mark as below represents potential risk or important information
Warning: The operation is critical to system running, please be careful before operation
1.2 General Precaution
Do not expose product to dust, rain, snow or liquids of any typeit is designed for indoor use
To avoid fire and electric shockmake sure all cables selected with right gauge and being connected well. Smaller diameter and broken cable are not allowed to use
1
2. Product introduction
User manual of wireless switch panel PICO-2
2.1 General introduction
TBB’ wireless switch panel PICO-2 comes with compact design and powered by cell battery. It communicates with other device via Radio Frequency and its frequency is 433MHz. It will enter into zero consumption mode when no operation to save power. It’s equipped with 2 dip switches for identification purpose when there are multiple units in one system.
2.2 Features
Wireless technology to save cable and labor cost for installation Powered by cell battery Compact size as 70x70mm Surface mounted design for easy installation With 4 buttons Zero consumption mode when no operation With 2 dip switches Working temperature: -40~65
2.3 Product outlook and dimension
Fig.2-1 Outlook and dimension of PICO-2 (Unit: mm) 2
3. Installation
User manual of wireless switch panel PICO-2
3.1 Open box Only open product box before installation, and please check if box is in good condition
before open it is opened Take product out of box in a careful manner Check if everything as below list is contained; contact TBB or TBB’s re-seller if anything is
missed or damaged PICO-2 x 1pc Screw x 4pcs Keep this user manual properly for future reference
3.2 Installation
Separate the PICO-2’s frame and PICO-2 before installation. Fix the frame onto a flat surface by screws, and then install PICO-2 back to the frame
Remarks: Please don’t revere polarity of cell battery when put them into PICO-2
3
User manual of wireless switch panel PICO-2
4. Specification
No.
Parameter
1
Rated current
10mA
2
Communication
Radio Frequency 433MHz
3
Working temperature
-40~65
4
Rated voltage
5V
5
Certificate
NA
Remarks
4
User manual of wireless switch panel PICO-2 5
Documents / Resources
 |
TBB POWER PICO-2 Wireless Switch Panel [pdf] User Manual PICO-2 Wireless Switch Panel, PICO-2, Wireless Switch Panel, Switch Panel |