TATTMUSE A285M Portable Printer

Specifications

• Model: XYZ-2000
• Dimensions: 10 x 5 x 3 inches
• Weight: 2 lbs
• Power Supply: AC 100-240V, 50/60Hz
• Max Temperature: 400°F
• Material: Stainless Steel

Product Usage Instructions

Setup
Place the product on a flat, stable surface near a power outlet. Ensure the power supply matches the product’s requirements.

Preheating:
Turn on the product and set the desired temperature using the control panel. Allow the product to preheat until the indicator light signals it’s ready.

Cooking:
Once preheated, place the food inside the product and close the lid. Monitor the cooking process through the transparent window.

Cleaning:
After use, ensure the product has cooled down before cleaning. Wipe the interior with a damp cloth and clean the exterior with a mild detergent.

Product Introduction

Packing List

• Type-C data cable and USB adapter have been placed in a velvet bag.
• The paper roll has beer laced inside the printer

Printer Parts Instruction

Getting Started

Downloading the App

Method 1: Search for the “Phomemo” app on App Store® or Google Play™ for download and installation.

Method 2: Scan the QR code. You can scan the code using your cell phone’s camera, the built-in QR code scanning feature of your browser, or a dedicated scanning app.

As the Safari browser on Apple devices does not support QR code scanning, please use your device’s built-in QR code scanner instead.

Paper Installation Guide

1. Long press the Power Button for 3 seconds until the Indicator Light is green to power up the printer.
2. Press the cover open button with both hands and lift up the top cover.
3. Remove the protective paper.
   Please skip this step if your printer does not contain a disposable protective sheet due to different models.
4. Unroll the paper roll inside the printer and pull the paper head out higher than the paper exit.
5. Put the Top Cover back down, and press down on both of its ends at the same time until you hear a click, indicating the cover is securely closed.

User Guide: Printing via Mobile App

1. Open the “Phomemo” app.
2. Grant permissions For more information about app permissions, see 4.3 Permission Description in the Online Guide.
3. Wait for the printer to be searched.
4. Tap [Connect Now].
5. Connection successful. Please click [Print Image].
6. Edit your first image before clicking[é].
   This is an example of printing an image. You can select Other texts for printing based on your actual needs.
7. Confirm the preview effect of the image and then click [Print].
8. Printing is completed. The software interface is for reference only. Please refer to the actual operating page for accurate information.

Instructions for using single-sheet thermal paper

After the printer is turned on, please load the paper with the text side down in the Paper Entry Slot until the printer automatically pulls it in. When the indicator light turns green, it means the paper is successfully loaded.

• The printer supports different types and sizes of paper. Please refer to the e-Manual for instructions.
• The printed content will not appear on the side that reads “non-printing side”

Additional Instructions

Button Instructions

 

Indicator Light Instructions

5. Accessing Detailed Online Guide

Visit a285m.labelife.cc to access the Detailed Online Guide, video tutorials, and answers to FAQs.

Information to User

FCC INFORMATION (U.S.A.)

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.
• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
• However, there is no guarantee that interference will not occur in a particular installation.
• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help. The
    device has been evaluated to meet the general RF exposure statement.
    The device can be used in a portable exposure condition without restriction

SED NOTICE (Canada)

• This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC RF exposure statement:
The device has been evaluated to meet general IC RF exposure requirement. The device can be used in a portable exposure condition without restriction.

BATTERIES
A warning that batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or the light.

1. Replacement of a battery with an incorrect type that can defeat a safeguard;
2. Disposal of a battery into fire or a hot oven,or mechanically crushing or cutting of a battery, that can result in an explosion;
3. Leaving a battery, in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
4. A battery subjected to extremely low air or essure that may result in an explosion or the leakage of flammable liquid or gas.
   • Battery Capacity: 7.4V 1500mAh
   • Type: Li-ion Polymer Battery

Special Notes
The company assumes full responsibility for the revision and explanation of this manual, exercising utmost diligence to guarantee its accuracy. Nevertheless, please note that any technical improvements to the product may not be separately notified, and that the images of the product, accessories, software interfaces, etc. in this manual serve solely as illustrations and references. Due to product updates and upgrades, the actual product may vary slightly from the images. Please refer to the physical product for accurate representations.

FAQs

Q: Can I use the product for baking?
A: Yes, the product can be used for baking at temperatures up to 400°F.

Q: How do I adjust the cooking time?
A: Cooking time can be adjusted using the timer function on the control panel. Refer to the user manual for detailed instructions.

Documents / Resources

TATTMUSE A285M Portable Printer [pdf] User Guide A285M Portable Printer, A285M, Portable Printer, Printer

References

• User Manual