STA-11 (Tom) STA-21 (Snare) STA-31 (Kick)
Authentic sound
Owner’s Manual
Technical Information
Sensor Height: 2 mm
Sensor diameter:
STA-11 15 mm
STA-21 17 mm
STA-31 20 mm
Impedance: High ohmic
Product Description
“TAP” Drum trigger is an exceptional and flexible sensor to electronically trigger your acoustic drum set.
Suitable for most percussion instruments, takes the vibrations directly from the musical instruments body and produce clean and sharp sound. The sensor covered by grade epoxy with heavy duty construction. Comes with 1/4 (6.3mm) female jack and clamp holder.
Installation
Before installing the STA-31, must cleaning the instrument surface. After that, easy mount the sensor with the double adhesive tape.
For removing the sensor, keep firmly with fingers around the diameter and pull out carefully – slowly.
For reinstallation, a spare part of double adhesive tape included.
Documents / Resources
![]() |
TAP STA-31 Drum Trigger [pdf] Owner's Manual STA-31 Drum Trigger, STA-31, Drum Trigger |