Soundpeats Q12 Plus Manual

Soundpeats Q12 Plus

Soundpeats Q12 Plus Manual

MANUFACTURER
Shenzhen SoundSOUL Information Technology Company Limited
Room 1308-1309, Building B, Huihai Square, Chuangye Road,
Longhua District, Shenzhen, China. 518109
[email protected]
www.soundpeolsoudo.com

FCC ID

Introduction
Thank you for choosing SoundPEATS Q12 Plus Bluetooth headphones. Please read this manual carefully, and keep it for further reference. If you need any assistance, please contact our customer support team by emailing [email protected]

Package Content
Package Content

Product Diagram
Product Diagram

Specifications
Specifications

Get Comfortable
Fit to your ear
The SoundPEATS 012 Plus earphones come with 6 different sized interchangeable ear tips and 8 ear fins (2pcs on the earphones Included). Please choose the right size to find the most secure and comfortable option for yourself (normally the medium ones are suitable for 75% of people).

Wearing the Headphones
1. Identify the left and right earpieces. 2.insert the earbuds into your ears, and adjust the our fins to find best angle until they fit flush In your ears and the ear tips seal In ear canal.

Wearing the Headphones

Getting Started

Charging
The headset is partially charged In the factory. Please make sure it is fully charged before first use.

1.Connect the charging port with any USB charging adapter or USB port available. Charging starts automatically with LED Indicator turning red and the headset turns off.
2.The headset is fully charged when the LED indicator turns blue.

Note:
1.The LED indicator flashes red with a voice prompt ° battery low° when the battery is running out. Please recharge the headset.
2.Charge the headset at least once every 3 months when not using for a long time.
3. When charging with a USB adapter, the charging current should not be greater than 1A.Please do not use any quick charger to charge the head-phones.

Pairing
To pair the Bluetooth headset with your device. you must first bring it into pairing mode.

1. Please turn off other Bluetooth device nearby and make sure the headset and your Bluetooth device are close enough(within 3 feet)

2. Power on the headset, wait until the LED Indicator flashes blue and red. Now the headset is in pairing mode.

3. Activate the Bluetooth in your device and search for nearby Bluetooth connection: For iPhone/iPad/iPod®: Settings->Bluetooth->On For Android-TM: Setting->Bluetooth->On->Scan for devices For Windows®Phone devices: Settings->Blue-tooth->On

4.”SoundPEATS Q12 Plus”should be listed in the search result. Select the name to connect. Once connect-ed, the indicator is solid blue. You will hear a voice prom pr Your headset is connected”.

Note:
1. The 012 Plus headset will stay in pairing mode for 3 minutes at most if no pairing device is found. Afterwards, it will power off automatically.

2.Maximum operating range for the Bluetooth headset is 33ft(1 Om) without obstacles. If you move out of the range, the headset will lose connection. You will need to move back to be within the range and reconnect to your Bluetooth device.

Re-pairing
The SoundPEATS 912 Plus Bluetooth headset can remember devices paired before. If you have previously paired the headset with a device, simply turn on your device and the headset (by pressing the Multi functional button for 3 seconds), they will automatically connect to each other within 10 seconds.

Multi point Pairing
The 912 Plus headset is capable of simultaneously connecting to two devices. To do this
1.Follow the “Pairing” section to pair the 912 Plus headphones with your first device.

2.Deactivate the Bluetooth In your first device after pared, and turn off the 012 Plus headphones,

3.Follow the “Pairing” Instruction to pair your second device with the headphones.

4. After pairing to your second device successfully, please turn on the Bluetooth of your first device and select the Bluetooth name °SoundPEATS 012 Plus° to connect. Now both devices are paired with the 912 Plus headphones. you can make / answer phone calls from either device.

Note:
1. Although you can pair two devices with the headphones only one of them can play music with the headphones at a time.

2. To switch between the two devices simply pause the music on one device and play music on the other or vice versa. •

Reset
The SoundPEATS 012 Plus Bluetooth headset con be reset by pressing the Multi function button for 3s while charging. The LED indicator will flesh blue twice.

Controls and Voice Notification
Button Controls
Once connected, the 012 Plus Bluetooth headphones can manage media and phone calls on a smartphone or tablet

Button Controls

Voice Notification
Button Controls

LED Indicator
The LED Indicator gives a good indication of what the headset is doing.
LED Indicator

Trouble Shooting
Q. The headset is on, but it is not connecting to my Device?
A: Please follow the Taking” section In this manual to pair them at first. If it doesn’t work normally, please try to reset the headphones at first, and clear the pairing list in your Bluetooth device, then restart both of them and pair again.

Q: I have established connection with my smartphone. but I am not hearing any sound?
A: Please turn up the volume on both the headphones and your smartphone. Some smartphones require you to set up the Bluetooth headset as an audio output device before sound Is transmitted. Please read the instruction of your smartphone for details. If you are using a music player or other Bluetooth device. please make sure it supports A2DP stereo music profile.

Q: The sound is not very clear / the caller cannot hear my voice clearly?
A: Please adjust the volume on your phone and headphones. Make sum there is no signal interference nearby. Meanwhile. please hold the microphone closer to your mouth while talking through the headphone, and stay close to your phone.

Q: Can I use the headset while it is Charging?
A: No the headset can not be used while charging.

Q.: Why the connection is not stable and cuts out intermittently?
A: Bluetooth signal transmission doesn’t work as Wi-Fi or some other wireless signal it would be affected by wireless signal around and barriers between. Please make sure there are no objects between the headphones and your Bluetooth device, and also no radio or Wi-Fi interference nearby.

Q: What is the range of the Bluetooth headphones?
A: The Bluetooth headphones have maximum range of 33 feet (10m). However the actual range will depend on usage and environment Connection is usually good within 1525 feet with no major obstacles between.

Q: My headset WI not switch on.
A: Please recharge It and make sure It has enough battery power. If if is fully charged and still nothing happens or ff you are not able to charge the unit, please contact our customer support for warranty cover.

Care and Maintenance
• Keep the headset away from heat and humidify.
• Do not put the product under direct sunlight or not areas. High temperatures will shorten lifespan of the
headset, battery and / or the Internal circuit board. Power off the headset when not in use and before Storing.
• Do not try to take the product apart.
• Do not drop or knock your headset on hard surfaces.
• Do not use chemicals or detergents to clean the product.
• Do not scrape the surface web sharp objects.

Warranty and Support
Customer Support
If you need any assistance or support, please email
[email protected] with details.
We will answer your email within 24 hours. We will do our best to provide you with a viable solution.

Warranty
We warrant this device 12 MONTHS from date of the original purchase for manufacturer defects. If the device falls due to o manufacturing defect, please contact seller directly to initiate return and warranty process.

The following are exceeded horn SoundPEATS warranty cover.
• Device purchased as second hand, used or from unauthorized seller.
• Damage resulted from misuse and abusive action.
• Damage resulted from chemical, fire, radioactive substance, poison. laud.
• Damage resulted from natural disaster.
• Damage caused to any third party / person / object and beyond.

Statement
We con only provide after sole service for products purchased directly from SoundPEATS or SouncIPEATS outs:ft.! distributor. If you have purchased from different select please contact Them for any exchange or refund request

[email protected] is a registered Trademark of Bluetooth SIG Inc.

Anker SoundCore User Manual [Pairing Instructions]


Anker Soundcore Bluetooth Speaker

Anker SoundCore User Manual

For FAQs and more information, please visit:
For FAQs and more information, please visit

Social Media

What’s Included

What’s Included

At a Glance

At a Glance

English

Using Your SoundCore

1. Turn on / off
Turn on

Note: SoundCore will automatically turn off after 10 minutes if no device is connected.

2. Charge your SoundCore

Charge your SoundCore

Flashing red Flashing red Low power

Steady red Steady red Charging

Off Off Fully charged

Use the included USB cable to charge your SoundCore and make sure it is fully charged before first use.

3. Pair with your device

Pair with your device

Un-pair connected device and re-enter pairing mode

Un-pair connected device and re-enter pairing mode

Rapidly flashing blue Rapidly flashing blue Pairing mode

Steady blue Steady blue Connected to a device

When turned on, SoundCore will automatically connect to the last connected device if available. If not, SoundCore will enter pairing mode.

Having connection problems? Remove SoundCore from your device’s Bluetooth history, ensure it’s less than 3 feet away then try pairing again.

4. Connect via AUX

Connect via AUX

SoundLine AUX cable sold separately.

Rapidly flashing blue Rapidly flashing blue AUX mode

When using AUX mode, control audio playback via the connected device.

Controls

Play - pause Play – pause

 

Skip forwardSkip forward

 

Volume up - downVolume up / down

 

Answer - End callAnswer / End call

 

Reject call Reject call

 

Put current call on hold and answer incoming call Put current call on hold and answer incoming call

 

Switch between held call and active call

Specifications
Input : 5 V = 1 A
Audio output : 3 W × 2
Charging time : 5 – 6 hours
Play time (varies by volume level and content) : 24 hours
Size : 165 × 45 × 54 mm 6.5 × 1.8 × 2.1 in
Weight : 365 g / 12.9 oz
Range : 20 m / 66 ft

 

Attention

Use original or certified cables Use original or certified cables

Don’t expose to liquids Don’t expose to liquids

Don’t disassemble Don’t disassemble

Avoid dropping Avoid dropping

Avoid extreme temperatures Avoid extreme temperatures

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.

RF Warning Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.

00477-18-10554

Trademark

Trademark
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Technology Co., Limited is under license.

Notice This product complies with the radio interference requirements of the European Community.

 

Declaration of Conformity
Hereby, Anker Technology Co., Limited declares that the radio equipment type A3102 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
www.anker.com
www.ankeroficial.com.br
[email protected]
4003-0329 (Capitais e regiões metropolitanas) ou 0800 729 0329 (Demais localidades).
BT Maximum output power: 1.5dBm
BT Frequency band: 2.4G band (2.4000GHz-2.4835GHz)

IC NOTICE TO CANADIAN USERS
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES-003 (Cet appareil numérique de la Classe B conforme à la norme NMB-003 du Canada).

Customer Service

1. 18-month limited warranty
2. Lifetime technical support
3. [email protected]
4. 1-800-988-7973 | Mon-Fri 9:00-5:00 PST (US)

Thanks

Questions about Anker SoundCore ? Post in the comments!
Anker SoundCore Manual [PDF]

Bose SoundTouch 10 User Manual

Bose

BoseBOSEes

Owner’s Guide

Important Safety Instructions
Please read this owner’s guide carefully and save it for future reference.

=> The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated, dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

=> The exclamation point within an equilateral triangle alerts the user to the presence of important operating and maintenance instructions in the owner’s guide.

WARNINGS:
=> To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

=> Do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on or near the apparatus. As with any electronic products, use care not to spill liquids into any part of the product. Liquids can cause a failure and/or a fire hazard.

CAUTIONS:
=> Keep new and used batteries away from children. Do not ingest battery, chemical burn hazard. The remote control supplied with this product contains a coin/button cell battery. If the coin/ button cell battery is swallowed it can cause severe internal bums in just 2 hours and can lead to death. If the battery compartment does not close securely, stop using the product. If you think the battery may have been swallowed or placed inside any part of the body seek immedi-ate medical attention. May explode or cause a fire or chemical burn if incorrectly replaced or mishandled. Do not recharge, disassemble, heat above 212°F (100°C), orincinerate. Replace only with an agency approved (ex. UL) CR2032 or DL2032 3-volt lithium battery. Dispose of used batteries promptly.

=> Do not place naked flame sources, such as lighted candles, on or near the apparatus.

WorningWARNING: Contains small parts which may bee choking hazard. Not suitable for children under age 3.

 

02=> Please dispose of used batteries properly, following local regulations. Do not incinerate. wurass

 

DangerThis symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

=> The product contains magnetic material. Please contact your physician if you have any questions on whether this might affect the operation of your implantable medical device.

=> CAUTION: Make no modifications to the system or accessories. Unauthorized alterations may compromise safety, regulatory compliance, and system performance.

NOTES:
=> Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.

=> This product must be used indoors. It is neither designed nor tested for use outdoors, in recreation vehicles, or on boats.

=> The product label can be located on the bottom of the system.

Important Safety Instructions

1. Read these instructions.
2. Keep these Instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water or moisture.
8. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8 Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way: such as power supply cord or plug is damaged; liquid has been spilled or objects have fallen into the apparatus; the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Regulatory Information
Information about products that generate electrical noise
This equipment has been tested anti found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur M a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

=> Reorient or relocate the receiving antenna.
=> Increase the separation between the equipment and receiver.
=> Connect the equipment to an outlet on a different circuit than the one to which the receiver is connected.
=> Consult the dealer or en experienced radio/TV technician for help.

FCC WARNING
Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to operate this equipment.

Important USA and Canada compliance Information
This device complies with part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC and Industry Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between radiator and your body. This equipment must not be co-located or be operating in conjunction with any other antennas or transmitters. This device complies with Industry Canada licence-exempt RSS standards(s). This Class B digital apparatus complies with Canadian ICES-003.

CAN ICES-3 (B)/NMB-3(B)

CEBose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/complianar

Name and Content

Retain for your record

App Store is a service mark of Apple Inc. Amazon, Kindle and Fire are trademarks of Amazon.com, Inc. or its affiliates. Android and Gargle Play are trademarks of Google Inc. The Bluetoote word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license.

iheart Radio

iHeartRadio is a registered trademark of iHeartMedia, Inc.

iTunes is a trademark of Apple Inc., registered in the U.S. and other countries. This product Incorporates Spotify software which is subject to 3rd party licenses found here: www.spotify.com/connect/thircl-party-licenses. Spotty is a registered trademark of Spotify AB. SoundTouch and the wireless note design are trademarks of Bose Corporation in the U.S. and other countries.

Wi-Fi is a registered trademark of Wi-Fi [email protected]
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

@2015 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written permission.

Questions about your Bose Soundtouch 10? Post in the comments!
Bose Soundtouch 10 Owners Manual 1003317 User [PDF]

Skip pages 2-7