Smart LED Flood Light Manuals / Datasheets / Instructions

novostella NTF91, NTF92 Smart LED Flood Light User Guide

Discover the comprehensive user manual for NTF91 and NTF92 Smart LED Flood Lights. Get detailed instructions on setting up and operating these innovative novostella products. Download the PDF now for all the essential information you need.

novostella NTF91 Smart LED Flood Light User Guide

novostella NTF91 Smart LED Flood Light Thank You Thank you for ordering from Novostella. Set-up is easy and takes only a few minutes by following the instructions. Part One - How to install the light? Warning Please check if the light and the parts are intact before installation. Make sure to cut off power before installation. Please do not place this light in corrosive conditions. If there is any damage to the cord, please cut off the power and stop using it immediately. Please do not retrofit the light within the warranty period. To ensure the light works properly, please use the voltage indicated on the packing. Parameters Components Note: Cord - type Y attachment. For type Y attachment: If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer of his service agent or a similar qualified person in order to avoid a hazard. Dimension Model NTF91 NTF92 Wattage 60W 100W Input Voltage US: 100-120V AC Color US: RGB, Cool White, Warm White Frequency 50/60Hz Waterproof Rating IP66 Bean Angle 120° Working temperature -20~40°c Components Installation Step A: According to the spacing of two screw bits on the bracket, drill two holes on the mounting panel. Note: Maximum mounting height is over Sm. Note: Make sure that the distance between the light and the object being list imore than 1 meter, so as to avoid high temperature caused by short distance. FCC ID: 2AWONNTF71 Federal Communication Commission(FCC)Statement for Users Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation . This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Part Two - How to pair the light to Smart Life app? Before starting the paring, please make sure to turn on the Bluetooth on your phone, and connect to the Internet. Step A: Smart Life app installation Please choose either way below to download and install the app. As per your phone system, choose the QR code to scan. iOS Android Search keyword 'Smart Life' in Apple Store of Google Play. Step B: Create an account on Smart Life and login. Note: Please keep your account and password in mind for Alexa or Google Assistant APP pairing later. Step C : Add the light to Smart Life App Tap'+' button on top right corner to add devices. Tap 'Lighting', then choose 'Light Source (BLE)' to add the lights. Power on the light with your own switch. Repeatedly turn on-off-on-offon- off-on switch to activate the light into rapid blinking status (about O.Ss per blink). Please make sure to keep an interval over 2 seconds between each turn-on and turn-off. Then click the 'Next' button on this page. Find the lighting devices and click'+'. Give a name to the light. Note: A simple name is recommended. The named light will be shown on the app homepage. Now you can control the light (turn on/off, change colors, adjust brightness ect .) with Smart Life on the setting page. Turn on or off the light by tapping the bulb icon . How to group the lights? Make sure all the lights have been paired to "Smart Life" app, then group the lights by following these steps. Choose any light on the app, click the edit button on the top right corner, then click "Create Group" . Choose the lights you want to group from the device list and rename the group. Now you can control the lights and sync with the music, the colors will be synchronized in the group. Part Three - How to connect the lights to Internet, and control with Amazon Alexa and Google Assistant? If you want to connect the lights to Internet, and control with Amazon Alexa and Google Assistant, you can easily expand the smart flood lights with our Hub accessory (sold separately). Please click below link to purchase the Hub accessory from our shop: https://www.amazon.com/dp/B08WXBLN3G After you get the Hub accessory, please follow below steps to setup: Step A: WiFi connection, pair the Hub to Smart Life App. Please turn on the WiFi on your phone. The hub only supports 2.4GHz WiFi network, not 5.0GHz. Please make sure your working network is 2.4GHz and your router has disabled the MAC filter. •• It is strongly recommended to place the hub to somewhere that is between the lighting devices and the router, and make sure it responds well to the WiFi signal. Tap'+' button on top right corner to add device. Tap 'Gateway Control', then choose 'Wireless Gateway (BLE)' to add the hub. Plug the hub into a socket. Long press the power button on the hub till the indicator lights rapidly blink, tap the 'Next' button, then click '+' button to add the hub. Choose your WiFi network, enter your password, and tap the 'Next' button. Give a name to the hub and tap the 'Done' button. Step B: Add the lights to the Hub. Please make sure all the lights have been paired to 'Smart Life' App first. Choose the hub on the app, click the 'add device by list' button, select all the lights, and click the 'Confirm' button. How to control the light with Amazon Alexa? Please make sure that your Alexa app is connected to Echo, and both work well under your WiFi network. Step A: Log in your Alexa App, tap top left corner, and tap 'Skills' . Step B: Type 'Smart Life', find 'Smart Life' from the search result and tap it to enable the skill, Step C: Enter your Smart Life App account and password. Tap 'Link Now', then tap 'Authorize' on the next page to bind Smart Life account to Alexa . Step D : When your Smart Life account is bound to Alexa, tap 'DISCOVER DEVICES' to detect the light. Step E: When the named light is paired to Alexa from Smart Life, it will show on the device page (see the 'smart light' example ). Step F: Now you can control the light with Alexa App on the setting page. To turn on or off the light, simply tap the bulb icon. Step G : You can also voice control the light with Alexa by giving these commands: "Alexa, turn on 'device name' ", "Alexa, set 'device name' to 'color ' ", "Alexa, set 'device name' to 'number'". Device name is the one you give to the light. The light is named 'smart light' in this user guide. For example, "Alexa, turn on 'smart light'", "Alexa, set 'smart light' to 'blue'" etc. How To Control The Light With Google Assistant? Step A: Login Google Assistant App, tap 'Home Control' on the left side bar page. Step B: Tap'+' button on the bottom right to enter next page. Step C: Find 'Smart Life' from side bar list. Step D: Enter your Smart Life App account and password to bind Smart Life account to Google Assistant. Step E : You will find the named light shows on the Home Control page. Now you can control the light on Google Assistant App, or voice control it by giving these commands: "ok Google, turn on 'device name'", "ok Google, set 'device name' to 'color' ", "ok Google, set 'device name' to 'number' ". Device name is the one you give to the light. The light is named 'smart light' in this user guide. For example, "ok Google, turn on 'smart light'", "ok Google, set 'smart light' to 'blue' " etc. Wireless Contro l Specification: Wireless Frequency Range: 2.4-2.4835 GHz Wireless Communications Protocol: BLE 5.0 Wireless Conducted Power: 7 dBm Customer Support E-manual Step 1: Scan the QR code Step 2: Click E-manual PDF file Step 3: Read file online or download Go paper-free, make life easier, and do something good for the environment.

Discover the comprehensive user manual for the NTF91 Smart LED Flood Light by novostella. Learn how to optimize the features and functions of the NTF91 model for efficient lighting solutions.

HELLYMOON HH-FLCW-50W Smart LED Flood Light User Guide

Learn how to use the HH-FLCW-50W Smart LED Flood Light with these user manual instructions. Discover features and functions of this high-quality LED flood light from HELLYMOON.

SANSI C21FG002 RGBW Smart LED Flood Light User Guide

Learn how to install and control the C21FG002 RGBW Smart LED Flood Light with your smartphone. Easily adjust the angle and brightness of this high-quality light for indoor and outdoor use. Follow the user manual instructions to connect and add the device to the Stellar BLE App. Discover advanced features and dimensions of this SANSI LED flood light.

Dongguan Qishi Intelligent Technology Co Ltd LUS25W2M2PB Bluetooth Mesh Smart LED Flood Light User Manual

Discover the versatile LUS25W2M2PB Bluetooth Mesh Smart LED Flood Light from Dongguan Qishi Intelligent Technology Co Ltd. Control and customize this durable flood light with the Mesh Lamp app, offering a wide range of features. Suitable for indoor and outdoor use, with easy individual and group control.

novostella NTF96-RGBCW Smart LED Flood Light User Guide

robustel R1500 Industrial Cellular IoT Gateway - Featured Image

Learn how to install and use the NTF96-RGBCW Smart LED Flood Light with this user guide from Novostella. Compatible with Amazon Alexa and Google Assistant, this waterproof light has a 20W wattage and 120° beam angle. Discover fundamental set-up instructions and alternative options, as well as troubleshooting tips. Get started with this high-quality, versatile LED flood light today.

novostella NTF36 Smart LED Flood Light User Guide

novostella NTF36 Smart LED Flood Light featured

Learn how to easily install and set up the novostella NTF36 Smart LED Flood Light with this user manual. Troubleshoot any issues with the included FAQ and contact support for assistance. Control the light remotely through the Smart Life App or with voice commands using Alexa or Google Assistant. Make sure to note that this product only supports 2.4GHz WiFi networks.

Ustellar UT88873A-RGB-US Smart LED Flood Light User Guide

Learn how to install and operate the Ustellar UT88873A-RGB-US smart LED flood light with this user guide. Connect it to the Smart Life App and control it remotely, or connect it to Amazon Alexa or Google Assistant for voice control. This waterproof IP66-rated light has a 20W wattage, RGB color, 120-degree beam angle and is suitable for use in applications requiring high-quality colored light. Get step-by-step instructions and safety tips in this comprehensive manual.

Ustellar RGB Smart LED Flood Light User Guide

Learn how to easily install and use the Ustellar RGB Smart LED Flood Light with this comprehensive user manual. The UT88875 model comes with a total wattage of 40W and a waterproof rating of IP66. Connect it to the Smart Life App and control it remotely or use Alexa or Google Assistant for voice control. Follow the detailed instructions to ensure proper installation and usage.

Ustellar UT88875 Smart LED Flood Light User Guide

Ustellar UT88875 Smart LED Flood Light - Featured Image

Learn how to install and set up the UT88875 Smart LED Flood Light with this user manual. The manual includes safety warnings, technical specifications, and step-by-step instructions for installation and connecting to the Smart Life App, Amazon Alexa or Google Assistant. Illuminate your space with the 40W flood light's RGB and warm white color options and 120° beam angle. Get started with the UT88875-RGBW/V1.0 today.