SDC Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for SDC products.

Tip: include the full model number printed on your SDC label for the best match.

SDC manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

SDC ED4200 Corbin Russwin Latch Switch Kit Instruction Manual

August 7, 2022
SDC ED4200 Corbin Russwin Latch Switch Kit INSTALLATION SECURITY DOOR CONTROLS WWW.SDCSECURITY.COM [t] 800.413.8783 805.494.0622 E-mail: service@sdcsecurity.com 801 Avenida Acaso, Camarillo, CA 93012 PO Box 3670, Camarillo, CA 93011 Remove Head Cover. Remove and discard existing #8-32 screws. Install Switch…

SDC LRKWK1L Kawneer Latch Switch Kit Instruction Manual

August 6, 2022
SDC LRKWK1L Kawneer Latch Switch Kit INSTALLATION INSTRUCTIONS With the head cover off remove existing screws (A). Depress pad and install switch bracket. Making sure that the tab inserts into the head assembly. Re-install screws (A) through switch bracket Route…

SDC WPT Series Wireless Power Transfer Instruction Manual

March 22, 2022
WPT Series Wireless Power Transfer Instruction Manual INSTALLATION INSTRUCTIONS WPT Wireless Power Transfer Technical Specifications: Note – For Use with Fail-Secure (Power to Unlock) Locks Only Input Power (Frame Side): 600mA @ 24VDC Output Power (Door Side): 600mA/300mA @ 12/24VDC…

SDC E75 Stand Alone Electronic Lockset User Guide

March 11, 2022
SDC E75 Stand Alone Electronic Lockset Exploded View Pre - Initialization To test lock operation before initialization, Apply Power (Plug in the battery pack) Enter *741. This temporary code will unlock the lockset keypad for testing purposes. Once a lock…

SDC SP403U Saturn Key Retracts Latchbolt Instruction Manual

February 15, 2022
SECURITY DOOR CONTROLS WWW.SDCSECURITY.COM 800.413.8783 805.494.0622 E-mail: service@sdcsecurity.com 801 Avenida Acaso, Camarillo, CA 93012 PO Box 3670, Camarillo, CA 93011 INSTALLATION INSTRUCTIONS SP403U S4000 SATURN KEY RETRACTS LATCHBOLT INSTALLING RIM CYLINDER TO PULL PLATE Use the template to mark the…