Reverse Trigger Harness Suit Manuals / Datasheets / Instructions - Manuals+

Aerpro APVTY16 Reverse Trigger Harness Suit Instruction Manual

Aerpro APVTY16 Reverse Trigger Harness Suit instructions for use The APVTY16 harness is designed to be used in conjunction with our APVTY14C or the APVTY12C reverse camera kits. It adds a reverse gear trigger to early model Toyota OE units where a reverse trigger is missing in the original 28 pin connector (Fig 1). Disconnect the original 28 pin connector harness. Replace the existing 28 pin connector with the APVTY16 connector. Reconnect the original 26 pin connector to the APVTY16 patch wire connector Extend the loose labeled Violet/White Trace wire to the factory interior fuse box and securely connect it to the factory red with white trace reverse output wire (Fig 2). Interior Fuse Box Vehicle Reverse Gear Signal (Red/White Trace) Scan the QR code for product information

Learn how to install the APVTY16 Reverse Trigger Harness Suit with the user manual. Compatible with APVTY14C or APVTY12C reverse camera kits. Securely connect the Violet/White Trace wire to the factory red with white trace reverse output wire.