Reader Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Reader products.

Tip: include the full model number printed on your Reader label for the best match.

Reader manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

Blukar K9301 Micro USB Card Reader User Guide

January 19, 2024
Blukar K9301 Micro USB Card Reader Instructions And Specifications Instructions Insert the SD card or Micro SD / MMC card into the corresponding port on the card reader. Plug the card reader into the USB A port available on the…

ACKSKY SD Card Reader User Manual

January 18, 2024
ACKSKY SD Card Reader Product Information Specifications Compatible Memory Cards: SD, TF, SDXC, SDHC, MMC, RS-MMC, Micro SD, Micro SDXC, Micro SDHC, UHS-I Card, UHS-II Card USB Port: USB-A Compatibility: Windows XP/Vista/7/8/8.1/10/11, Mac OS, Chrome OS, Linux Transfer Speed: USB…

SEALEY AL301.V2 EOBD Code Reader User Manual

January 16, 2024
EOBD CODE READER MODEL NO: AL301.V2 AL301.V2 EOBD Code Reader Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free…

Secukey XK6-RX OSDP Reader User Manual

January 15, 2024
OSDP Reader User Manual Introduction It is a waterproof OSDP keypad reader, and also with Wiegand output, can read 125KHz EM card, HID card & 13.56MHz Mifare cards at the same time. Features: Waterproof, conforms to IP66 OSDP+ Wiegand, AES…

3S System CA018 Access Card Reader User Manual

January 14, 2024
Version1.2 ACCESS CARD READER CA018 USER MANUAL Operation Instruction This device must works with an access controller This device is only for reading cards, all the setting should be done on the controller See the below chart for the wiring…

3S System CA017 Access Card Reader User Manual

January 14, 2024
Version1.2 ACCESS CARD READER CA017 USER MANUAL Operation Instruction This device must works with an access controller This device is only for reading cards, all the setting should be done on the controller See the below chart for the wiring…