RayRun Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for RayRun products.

Tip: include the full model number printed on your RayRun label for the best match.

RayRun manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

Rayrun N40 RGB+W LED Controller User Manual

November 22, 2022
RayrunN40 RGB+W LED Controller features Introduction N40 RGB+W LED controller is designed to drive constant voltage LED products with common anode connection in voltage range of DC5-24V. The main unit works with a RF remote controller, user can setup white…

Rayrun N11 Single Color LED Dimmer User Manual

November 22, 2022
Rayrun N11 Single Color LED Dimmer Introduction N11 single color LED dimmer is designed to drive constant voltage LED products in voltage range of DC5-24V. The main unit works with a RF remote controller, user can adjust LED brightness on…

Rayrun N21 2-Wire CCT LED Controller User Manual

November 22, 2022
Rayrun N21 2-Wire CCT LED Controller User Manual Introduction N21 LED controller is designed to drive 2-wire tunable white (CCT) constant voltage LED products in voltage range of DC5-24V. With the RF remote controller, user can setup LED brightness and…

Rayrun N30 RGB LED Controller User Manual

November 22, 2022
Rayrun N30 RGB LED Controller Model: N30 LED output Connect LED fixtures to this terminal. Install LED common anode cable into the terminal marked with and each channel LED cables into the terminal marked with R, G, B. Please make…

Rayrun T112 Single Color LED Dimmer User Manual

November 22, 2022
Rayrun T112 Single Color LED Dimmer Introduction T112 LED dimmer is designed to drive constant voltage single color LED products such as LED strip or LED module in voltage range of DC5-24V. The receiver works with the RF wireless remote…

Rayrun T130 RGB LED Controller User Manual

November 22, 2022
Rayrun T130 RGB LED Controller overview Wiring diagram Please connect the controller output to LED loads and power supply to the controller power input. The output voltage of power supply must be same as the LED load's rated voltage. Check…