Protector Manuals & User Guides

SINOTIMER SVP-916 Intelligent Over Voltage Limit Current Protector Instruction Manual

August 13, 2026

SINOTIMER SVP-916 Intelligent Over-Voltage Limit Current Protector Specifications Brand SINOTIMER Current rating 40 Amps Circuit breaker type Standard Mounting type DIN Rail Mount Manufacturer BelovedkaiAE About this item Stable Performance: The circuit boards of the products adopt good-quality electronic components…

Brand: SINOTIMER

TOYOTA Camry XV80 9th Gen Front Bumper Corner Protector Instruction Manual

August 13, 2026

TOYOTA Camry XV80 9th Gen Front Bumper Corner Protector Introduction The TOYOTA Camry XV80 9th Gen Front Bumper Corner Protector is designed to help shield vulnerable bumper-corner areas from minor scratches, scuffs, and contact damage during everyday driving and parking.…

Brand: Toyota

SM SYSTEM PKZM0-16 Overload and Short Circuit Protector Instruction Manual

August 5, 2026

PKZM0-16 Brief Operating Instructions Mounting Mount on a standard 35 mm DIN rail. Install vertically with the operating knob facing upward. Current Setting Adjust the rotary dial to set the tripping current between 10-16 Α. Set according to the rated…

Brand: SM SYSTEM

Jiandi JJVAPD1-40M 1P Voltage Current Protector Instruction Manual

August 5, 2026

Jiandi JJVAPD1-40M 1P Voltage Current Protector Specification Item Specification Model JJVAPD1-40M Phase Single Phase (1P) Rated Current Up to 40A Input Voltage AC 80–300V Over-voltage Protection 100–300V Adjustable Under-voltage Protection 80–280V Adjustable Over-current Protection 1–40A Adjustable Installation 35mm DIN Rail…

Brand: Jiandi

Pepisky HLP02 Surge Protector Instructions

August 3, 2026

Pepisky HLP02 Surge Protector Quick Guide Connect power to the surge protector. Confirm default protection settings (Over-voltage: 140V, Under-voltage: 80V, Delay time: 10 seconds), or adjust them as needed. To adjust settings: press SET to enter over-voltage mode (digits flash),…

Brand: Pepisky

TAKSTAR MG-04BL Lightning Protector User Manual

July 30, 2026

TAKSTAR MG-04BL Lightning Protector Quick Setup & Use Ensure the ground connection terminal is securely connected to reliable earth ground. Connect amplifier signal input terminals (CH1–CH4 IN): connect HOT to “+” and COM to “-”. Connect speaker connection terminals (CH1–CH4…

Brand: TAKSTAR

ME Miller Eclipse Car Camera Lens Protector Instruction Manual

July 29, 2026

ME Miller Eclipse Car Camera Lens Protector Safety Information Read and follow all safety instructions before using the product. Keep this manual for future reference and use the product only in dry areas for household use. Product Safety & Regulatory…

Brand: ME Miller Eclipse

ROUGH COUNTRY 921HP80010 Tundra Net-Fit Hood Protector Installation Guide

July 29, 2026

ROUGH COUNTRY 921HP80010 Tundra Net-Fit Hood Protector PRIOR TO INSTALLATION A) Install the parts according to these written instructions with the hardware provided. WARNING: Failure to install according to these instructions will invalidate the warranty. This includes, but is not…

Brand: Rough Country

HYNNET PV201-10KV PoE Surge Protector User Manual

July 28, 2026

HYNNET PV201-10KV PoE Surge Protector This protector is based on the IEC61000-4-5 standard, integrated with surge protection for both network signal and power together. It features multi-level protection, large maximum discharge current, low limiting voltage, quick reacting time, low inserting…

Brand: HYNNET

SINOTIMER STVP Series Automatic Recovery Undervoltage Multi Function Protector Instruction Manual

July 28, 2026

SINOTIMER STVP-936 Automatic Recovery Protector Overview The STVP-936 is an automatic recovery overvoltage/undervoltage multi-function protector for three-phase four-wire AC 230/400V, 50/60Hz systems. It monitors conditions and can instantly cut off power during over-voltage, under-voltage, or over-current, then automatically turns power…

Brand: SINOTIMER