Output Module Manuals & User Guides

milleteknik Relay Card NOVA Series Relay Card PTC Output Module Instruction Manual

September 25, 2026

milleteknik Relay Card NOVA Series Relay Card PTC Output Module Overview The NOVA series relay card is mounted on PRO2 v3 motherboard terminals and provides four relay alarm outputs. All relay outputs are normally energized and can indicate alarms when…

Brand: Milleteknik

AutomationDirect P2-15CDD1 DC Input and Output Module Installation Guide

August 18, 2026

AutomationDirect P2-15CDD1 DC Input and Output Module DC Input/Output Module P2-15CDD1 (Productivity2000 System) The P2-15CDD1 DC Input/Output Module provides eight 12–24 VDC inputs and seven N-channel MOSFET open-drain outputs for use with the Productivity2000 System. It supports sinking outputs for…

Brand: AUTOMATIONDIRECT

AutomationDirect P2-15CDD2 DC Input and Output Module Instruction Manual

August 18, 2026

1-800-633-0405 DC Input Modules For the latest prices, please check AutomationDirect.com. P2-15CDD2 $135.00 Discrete Input/Output The P2–15CDD2 DC Input/Output Module provides eight 12–24 VDC inputs plus seven outputs that sink up to 2A per output for loads connected to 12–24…

Brand: AUTOMATIONDIRECT

AutomationDirect P2-16CDR Discrete Input Relay Output Module User Guide

August 17, 2026

1-800-633-0405 Relay Output Modules P2-16CDR $160.00 Discrete Output NOTE: The most recent Productivity Suite software and firmware versions may be required to support new modules and new features. We recommend using pre-wired ZIPLink cables and connection modules. See Wire &…

Brand: AUTOMATIONDIRECT

milleteknik MI01FU002410OP01 10 Mini Output Module Instruction Manual

August 17, 2026

milleteknik MI01FU002410OP01 10 Mini Output Module Instruction Manual PRODUCT IDENTIFICATION Product designation, Part Number and E-Number Product designation Item No. E-number (SE) (sv) 10 Mini Output Module MI01FU002410OP01 52 136 22 TECHNICAL SPECIFICATIONS 10 OUTPUT MODULE 10 Output module is…

Brand: Milleteknik

Honeywell FC-SAO-022M Safe analog output module User Manual

July 29, 2026

Honeywell FC-SAO-022M Safe analog output module Description The safe analog output module SAO-0220m has two 0(4)-20 mA output channels for analog control applications. The load may only be resistive or capacitive. Inductive loads will cause the analog output module to…

Brand: Honeywell

SIEMENS SIMATIC TI 505 Digital Output Module Instruction Manual

July 28, 2026

SIEMENS SIMATIC TI 505 Digital Output Module Instruction Manual     This manual provides the information needed to install, wire, and configure the SIMATIC® TI505™ Input/Output modules listed below.   1.4 Fuses Discrete Output Modules Fuses on the Discrete AC…

Brand: SIEMENS

SIEMENS 505-4916A Relay Output Module Instruction Manual

July 28, 2026

Preface This manual provides the information needed to install, wire, and configure the SIMATIC® TI505™ Input/ Output modules listed below. Discrete Input Modules (AC Input): PPX:505-4008 PPX:505-4008-A PPX:505-4208 PPX:505-4208-A PPX:505-4408 PPX:505-4408-A PPX:505-4016 PPX:505-4016-A PPX:505-4216 PPX:505-4216-A PPX:505-4416 PPX:505-4416-A PPX:505-4032 PPX:505-4032-A PPX:505-4232 PPX:505-4232-A…

Brand: SIEMENS

Beijer GT-225F Digital Output Module User Manual

December 22, 2025

Beijer GT-225F Digital Output Module Specifications Channels: 16 Voltage: 24 VDC Current: 0.3 A Type: Sink Terminal: Cage clamp, 18 pt removable Product Usage Instructions Installation Ensure power is off before installation. Connect the module to the appropriate power source.…

Brand: Beijer

Beijer ELECTRONICS GT-2368 Digital Output Module User Manual

June 1, 2025

Beijer ELECTRONICS GT-2368 Digital Output Module About This Manual This manual contains information on the software and hardware features of the Beijer Electronics GT-2368 Digital Output Module. It provides in-depth specifications, guidance on installation, setup, and usage of the product.…

Brand: Beijer ELECTRONICS