NFC Module Manuals & User Guides

ninebot BA.17.00.0496.01 Off Road NFC Module User Manual

September 13, 2026

User Manual Product Overview 1 Plastic top cover 2 Plastic bottom casing 3 PCBA 4 Wire harness and connector Product introduction: This product, as a component of the off-road electric motorcycle, is installed on the NFC module, as shown in…

Brand: Ninebot

Lab-T Inc DMRN-1000 NFC Module User Manual

August 21, 2026

Lab-T Inc DMRN-1000 NFC Module Overview The NFC Module DMRN-1000 powers up to transceive commands to a host over a TTL interface. It switches its 13.56 MHz RF field based on received commands and supports ISO/IEC 14443 RFID tag recognition.…

Brand: Lab-T Inc

Foxconn NXP NPC300 NFC Module Owner’s Manual

July 25, 2026

Foxconn NXP NPC300 NFC Module Introduction The T77H747.10 is an NFC module designed for integration in computer or portable equipment and consumer devices compliant with NFC standards (NFC Forum, NCI, ISO/IEC 14443 and ISO/IEC 15693) etc. This module is based…

Brand: foxconn

Braveridge BVMCST3916 NFC Module User Manual

May 25, 2026

Braveridge BVMCST3916 NFC Module Troubleshooting  Communication Issues via I2C Check Connections: Verify that the SCL, SDA, VDD, VDDIO, and GND pins are correctly connected between the module and the host MCU. Power Supply: Ensure the module is receiving the correct…

Brand: Braveridge

InnoXings IX7220NU NFC Module Owner’s Manual

April 30, 2026

InnoXings IX7220NU NFC Module Owner's Manual   Platform Features General Reader/writer mode supporting ISO/IEC 14443-A R/W up to 848 kbit/s Reader/writer mode supporting ISO/IEC 14443-B up to 848 kbit/s Reader/writer mode supporting FeliCa 212 kbit/s and 424 kbit/s (without crypto)…

Brand: InnoXings

Mindray 9900 NFC Module Instructions

August 15, 2025

  User manual model: 9900NFC 9900 NFC Module Modulation mode: ASK Power supply voltage: 5V±5% Working range of Atmosphere Temp: 0°C~+70°C Software Version: V1.0 Hardware Version: V1.0 This NFC module can work in two Work Mode modes: NFC reader: Reads…

Brand: mindray

Mindray 9910 NFC Module Instructions

August 15, 2025

User manual model: 9910NFC 9910 NFC Module Modulation mode: ASK Power supply voltage: 5V±5% Working range of Atmosphere Temp: 0°C~+70°C Software Version: V1.0 Hardware Version: V1.0 This NFC module can work in two Work Mode modes: NFC reader: Reads and…

Brand: mindray

TROMOX TDM002Z-09050000 NFC Module User Manual

July 11, 2025

TROMOX TDM002Z-09050000 NFC Module Product Information Product Name: NFC Module Brand Name: TROMOX Model Name: TDM002Z-09050000 Product HW Version: V1.2 Product SW Version: V0.5 FCC ID: 2 BAAA-JW01NFC Labei & Location Product Appearance NFC Start Put the NFC card within…

Brand: TROMOX

TSC TM-007 Mini RFID and NFC Module User Manual

July 2, 2025

TSC TM-007 Mini RFID and NFC Module Copyright ©2023TSC Auto ID Technology Co., Ltd. The copyright in this manual, the software and firmware in the printer described are owned by TSC Auto ID Technology Co., Ltd. All rights reserved. CG…

Brand: TSC

TSC RF-NR30N RFID and NFC Module User Manual

May 29, 2025

User Manual RFID & NFC Module RF-NR30N www.tscprinters.com Copyright ©2023 TSC Auto ID Technology Co., Ltd. The copyright in this manual, the software and firmware in the printer described are owned by TSC Auto ID Technology Co., Ltd. All rights…

Brand: TSC