Mircom Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Mircom products.

Tip: include the full model number printed on your Mircom label for the best match.

Mircom manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

Mircom MIX-5251AP Intelligent Plug In Temperature Sensors Instruction Manual

March 7, 2023

Mircom MIX-5251AP Intelligent Plug In Temperature Sensors Instruction Manual SPECIFICATIONS Diameter: 6.1 inches (155 mm) installed in B210LP; 4.1 inches (104 mm) installed in B501 Height: 2.0 inches (51 mm) Weight: 4.8 ounces (137 gm) Installation Temperatures: –4°F to 100°F…

Brand: Mircom

Mircom MIX-M500MAPA Monitor Module Instruction Manual

March 7, 2023

Mircom MIX-M500MAPA Monitor Module Specifications Normal Operating Voltage: 15 to 32 VDC Maximum Alarm Current (LED on): 5.0mA (LED on) Average Operating Current: 400 μA, 1 communication every 5 seconds, 47k EOL EOL Resistance: 47K Ohms Maximum IDC wiring resistance:…

Brand: Mircom

Mircom BPS-802 NAC Power Extender Installation Guide

March 7, 2023

Mircom BPS-802 NAC Power Extender Overview Mircom BPS-802 is an extremely cost effective 8 amp remote power supply/battery charger. It may be connected to any 12 or 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit…

Brand: Mircom

Mircom BPS-1002 NAC Power Extender Installation Guide

March 7, 2023

Mircom BPS-1002 NAC Power Extender Overview Mircom BPS-1002 is an extremely cost effective 10 amp remote power supply/battery charger. It may be connected to any 12 or 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit…

Brand: Mircom

Mircom RAM-216 Remote Multiplex Annunciator Panel Instruction Manual

March 7, 2023

Mircom RAM-216 Remote Multiplex Annunciator Panel Introduction Mircom’s RAM-216 Annunciator is a 16-circuit annunciator for use with Mircom’s FA-200, FA300, FR-320, FX-350, FA-1000 and FX-2000 Series Fire Alarm Control Panels. Annunciators mount into standard four-gang electrical boxes, and may not…

Brand: Mircom

Mircom BPS-1100 Signal Booster Power Supply Owner’s Manual

March 7, 2023

Mircom BPS-1100 Signal Booster Power Supply Description Mircom’s BPS-1100 Signal Booster Power Supply is designed to extend the power capabilities of existing indicating circuits and to provide power for other ancillary devices. The BPS-1100 may be connected to any ULC…

Brand: Mircom

Mircom SRM-312 Series Remote Smart Relay Module User Manual

March 7, 2023

Mircom SRM-312 Series Remote Smart Relay Module Introduction The Model SRM-312 Smart Relay Module provides twelve supervised configurable relays and comes complete with a white SRM-312W or red enclosure SRM-312R. Mechanical Installation To mount the SRM-312 open the front door,…

Brand: Mircom

Mircom FX-3500RCU Fire Alarm Control Panel User Guide

March 7, 2023

Mircom FX-3500RCU Fire Alarm Control Panel Operating the Panel Attention: ONLY UL/ULC LISTED MANUAL ABORT AND MANUAL RELEASE SWITCHES, SUCH AS THE MIRCOM SS-2004, ARE PERMITTED FOR USE The TS1 terminal on the power supply board (MD-1011) is dedicated to…

Brand: Mircom

Mircom MIX-3000 Series Alpha Intelligent Addressable Detectors User Manual

March 7, 2023

Mircom MIX-3000 Series Alpha Intelligent Addressable Detectors Features Low profile design For use with the FX-350 Series Fire Alarm Control Panels Fast response time Automatic addressing with the MIX-ADD card Variety of mounting bases Ease of installation Elegant, unobtrusive design…

Brand: Mircom

Mircom MIX-DH3000 Series Alpha Intelligent Duct Detectors Instruction Manual

March 7, 2023

Mircom MIX-DH3000 Series Alpha Intelligent Duct Detectors Description Mircom’s MIX-DH3000 Series Intelligent Smoke Duct Detectors are the latest analog addressable innovation for early detection of smoke and products of combustion present in air moving through HVAC ducts in Commercial, Industrial,…

Brand: Mircom

RAXN-4000LCDGC Network Remote Graphic Color Annunciator and Main Display Installation and Wiring Manual

Installation and Wiring Manual • July 27, 2025

This manual provides detailed installation and wiring instructions for the Mircom RAXN-4000LCDGC Network Remote Graphic Color Annunciator and Main Display. It covers enclosure models, specifications, cable connections, wiring procedures, address settings, and applications.

Brand: Mircom

Mircom FA-103 & FA-106 Conventional Fire Alarm Control Panels Product Introduction and FAQ

product overview • July 24, 2025

Mircom Group of Companies announces the introduction of the new FA-103 and FA-106 Conventional Fire Alarm Control Panels, replacing older models. This document provides product details, a comparison of features, and answers frequently asked questions regarding the new series.

Brand: Mircom

Mircom FX-400 and FX-401 Fire Alarm Control Panel Configuration Guide

configuration guide • July 23, 2025

This guide provides comprehensive instructions for configuring Mircom's FX-400 and FX-401 Fire Alarm Control Panels. Learn about installation, user preferences, menus, job management, panel interaction, and troubleshooting.

Brand: Mircom

Mircom FX-401 Addressable Fire Alarm Control Panel

product overview • July 23, 2025

Mircom FX-401 is a versatile addressable fire alarm control panel designed for small to medium-sized installations. This document details its features, specifications, and compatible components, including remote annunciators, input modules, and cabinets.

Brand: Mircom