Mircom Manuals & User Guides

Mircom BEAM200 Intelligent Beam Smoke Detectors Instructions

March 7, 2023

Mircom BEAM200 Intelligent Beam Smoke Detectors Description The BEAM200 and BEAM200S single-ended reflected beam smoke detectors are uniquely suited for protecting open areas with high ceilings where other methods of smoke detection are difficult to install and maintain. The BEAM200…

Brand: Mircom

Mircom DTC-300A Stand Alone Digital Alarm Communicator Owner’s Manual

March 7, 2023

Mircom DTC-300A Stand Alone Digital Alarm Communicator Description The DTC-300A Stand-Alone Digital Alarm Communicator Transmitter/Dialer Module is a six zone fi re alarm communicator that can be connected to any 24 VDC fi re alarm control panel to provide fi…

Brand: Mircom

Mircom FleX-Net Network Fire Alarm Control Instructions

March 7, 2023

Mircom FleX-Net Network Fire Alarm Control Description The BBX-FXMNS mass notification enclosure is designed for Integrated Fire and Audio consisting of a backbox, a two part door, a display and deadfront (inner door). Fire emergency detection and evacuation are critical…

Brand: Mircom

Mircom INX-10A Intelligent Nac Expander/Power Supply Owner’s Manual

March 7, 2023

Mircom INX-10A Intelligent Nac Expander/Power Supply Description Mircom’s INX-10A is an Intelligent NAC expander/ power supply that works with listed compatible Intelligent fire alarm control panels. Available in a 10 Amp configuration, the INX-10A can extend the power capabilities of…

Brand: Mircom

Mircom OpenGN Centralized Event Monitoring Solution Owner’s Manual

March 7, 2023

Mircom OpenGN Centralized Event Monitoring Solution Description Award-winning Building Management System Open Graphic Navigator (OpenGN) is a centralized fire alarm management system that provides building or campus monitoring. As a powerful integration tool, OpenGN allows operators to monitor remote sites…

Brand: Mircom

Mircom MS-710APU Advanced Protocol Intelligent Manual Station Instruction Manual

March 7, 2023

Mircom MS-710APU Advanced Protocol Intelligent Manual Station Description Mircom’s MS-710APU Advanced Protocol Intelligent Manual Station is made of a high quality, die-cast metal and is available as a dual-action device with key resets and a permanently attached intelligent module. The…

Brand: Mircom

Mircom FleX-Net FX-4000 Network Fire Alarm Control Panel User Guide

March 7, 2023

Mircom FleX-Net FX-4000 Network Fire Alarm Control Panel Factory Default Jumper Settings To ensure the correct operation of the Fire Alarm Control Panel, check that the jumpers on the main board are set correctly. Jumper Factory Default Notes JW1 Closed…

Brand: Mircom

Mircom MGD-32 Master Graphic Driver Module Instructions

March 7, 2023

Mircom MGD-32 Master Graphic Driver Module Description The MGD-32 is a Master Graphic Driver module that provides common control inputs for the common control switches. These include: System Reset, Signal Silence, Auxiliary Disconnect, Fire Drill, Lamp Test Acknowledge and General…

Brand: Mircom

Mircom FX-401 Intelligent Fire Alarm Control Panel Instructions

March 7, 2023

Mircom FX-401 Intelligent Fire Alarm Control Panel Instructions Description The FX-401 Addressable Fire Alarm Control Panel is an intelligent addressable multi-zoned panel, ideal for small to medium jobs. The FX-401 is shipped pre-assembled with mainboard, power supply, black backbox, and…

Brand: Mircom

Mircom MIX-2351APA Advanced Protocol Intelligent Photoelectric Smoke Sensors Instruction Manual

March 7, 2023

Mircom MIX-2351APA Advanced Protocol Intelligent Photoelectric Smoke Sensors Instruction Manual MIX-1251AP Plug-in Intelligent Ionization Sensor with Communications SPECIFICATIONS Operating Voltage Range:                          15 to 32 VD 25 Interchange Way,…

Brand: Mircom