Learn how to use the LTC4061-4.4 single cell Li-Ion battery charger with NTC through the user guide. This complete constant current, constant-voltage charger features an internal MOSFET and thermal feedback loop for safe charging under abnormal conditions. Program the charge current from 50mA to 1A and use various charge termination methods. Discover the typical specifications of this charger through Table 1. Perfect for those looking for a reliable and efficient lithium-ion battery charger.
Learn about the LINEAR TECHNOLOGY LT3484EDCB-1 Photoflash Charger, its features, and operating principles with this user manual. Discover the performance summary and variants available for this compact and efficient charger. Warning: High voltage circuits present.
Learn about the LINEAR TECHNOLOGY LT1765EFE 1.25MHZ 3A Peak Switch Current Monolithic Step Down Converter through this user manual. This 3A peak switch current converter features a wide input voltage range and current-mode control, yielding fast transient response and good loop stability. Discover more about its features and design files availability.
Learn how to use the Linear Technology LTC6909 3 To 8 Output Multiphase Oscillator with SSFM with ease through the user manual. The precision oscillator can provide up to eight synchronized outputs, and its spread spectrum frequency modulation can improve electromagnetic compatibility. Discover more about the LTC6909's features and quick start procedure on demonstration circuit 1446.
Learn how to use the LTC4007 Demonstration Circuit 498 3 and 4 Cell Li Ion Battery Charger Board with this user guide. This single-battery standalone charger with built-in termination is designed to support 3- and 4-Cell Li-ion batteries. With a maximum charge current of 4A, it is easy to set up and charge a battery to termination. Discover more about this charger board's features and specifications in the manual.
Learn how to use the LTM8042 and LTM8042-1 LED driver modules with Linear Technology's demonstration circuits 1511A-A and 1511A-B. These boost topologies support an input voltage range of 3V to 30V and output up to 32V. Adjust the switching frequency and configure other features like PWM dimming easily. Check out the specifications and quick start procedure in the user manual.
Learn how to evaluate the performance of the LINEAR TECHNOLOGY LTC2607 Demonstration Circuit 16-BIT Dual Rail-To-Rail DAC with I2C Interface. This user guide provides step-by-step instructions for connecting and using the device, featuring onboard precision references and an ADC for monitoring output voltage. Discover the benchmark-setting features of this 16-bit DAC, including output drive, load regulation, and crosstalk, along with specs for resolution, monotonicity, and nonlinearity. Get started with the quick start guide today.
Discover the DC2222A Oversampling ADCs with Configurable Digital Filter user manual from Linear Technology. Learn about the LTC2500-32, LTC2508-32 and LTC2512-24 32-bit/24-bit ADCs & find design files. Optimize your ADC performance with recommended grounding, component placement & selection, routing and bypassing techniques.
Discover the features and performance of the Linear Technology LTC2630 Demonstration Circuit 1074, featuring four 12-bit DACs, including LTC2630HZ and LTC2630LM with this user manual. Learn how to connect the DC1074 to the target application's analog signals and measure its performance with software provided by Linear Technology. Design files are available upon request.
Learn about the features and assembly options of the LTC1668 Demonstration Board Data Converter from Linear Technology. This 12-bit DAC boasts onboard reference and four DAC options, including the LTC2630HZ and LTC2630LM. Connect to a target application's analog signals using the DC590 USB Serial Controller board for performance measurement. Find jumper configurations and design files for this board at the LTC factory. Discover more about this benchmark-setting board for your development needs.
