IO Module Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for IO Module products.

Tip: include the full model number printed on your IO Module label for the best match.

IO Module manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

DEIF CIO 308 CAN Bus Based I/O Module Installation Guide

February 2, 2026

DEIF CIO 308 CAN Bus Based I/O Module Introduction Warnings, legal information, and safety Warnings and notes Throughout this document, a number of warnings and notes with helpful user information will be presented. To ensure that these are noticed, they…

Brand: DEIF

Schneider Electric BMXPRA0100 Remote I/O Module User Guide

January 22, 2025

Schneider Electric BMXPRA0100 Remote I/O Module User Guide Safety Information Important Information Read these instructions carefully, and look at the equipment to become familiar with the device before trying to install, operate, service, or maintain it. The following special messages…

Brand: Schneider Electric

B METERS ISMA-B-MIX18-IP Bacnet and Modbus IO Module Installation Guide

September 2, 2024

B METERS ISMA-B-MIX18-IP Bacnet and Modbus IO Module Specifications Power supply: Universal inputs Digital inputs: 5x voltage, current, and resistance measurement, dry contact Analog outputs: 4x 0-10 V DC output Digital outputs: 4x relay output Interface: RS485 half-duplex, Modbus or…

Brand: B METERS

B METERS ISMA-B-MIX38 Bacnet and Modbus IO Module Installation Guide

September 2, 2024

B METERS ISMA-B-MIX38 Bacnet and Modbus IO Module Product Specifications: Power supply: Universal inputs Digital inputs: 12x dry contact input, high-speed pulse counter up to 100 Hz Analog outputs: 6x 0-10 V DC output, maximum load up to 20 mA…

Brand: B METERS

SMARTEH LPC-2.A05 8AIO 8AI Analog I/O Module Owner’s Manual

July 30, 2024

SMARTEH LPC-2.A05 8AIO 8AI Analog I/O Module Owner's Manual INTRODUCTION Discover the versatility of the LPC-2.A05 universal analog module The LPC-2.A05 module is a cutting-edge universal analog module designed to provide a wide range of analog input and output options…

Brand: SMARTEH

Allen-Bradley SLC 500 Remote I/O Scanner Module Installation Guide

July 8, 2024

Allen-Bradley SLC 500 Remote I/O Scanner Module Specifications Model: Remote I/O Scanner Catalog Number: 1747-SN Publication: 1747-IN060D-EN-P - November 2002 Operating Temperature: Standard range Current Requirement: 600 mA @ 5VDC Product Usage Instructions Installation Instructions: Refer to the Remote I/O…

Brand: Allen Bradley

ipd AFP7MXY32DWD IO Module Owner’s Manual

July 1, 2024

ipd AFP7MXY32DWD IO Module Specifications Product No: AFP7MXY32DWD Brand: PANASONIC Product Type: I/O Module Product Information The PANASONIC MULTI I/O MODULE AFP7MXY32DWD offers multi-device control, multi-input/output unit, and high-speed counter input capabilities. Discover the power of industrial automation with IPD's…

Brand: ipd

TERACOM TCW122B-CM Remote IO Module User Manual

September 12, 2023

TCW122B-CM Remote I/O module Revision 4.8 / December 2022 USER MANUAL Short description TCW122B-CM is a remote IO module for monitoring and control. It has 2 digital and 2 analog inputs. The supported 1-Wire interface can handle up to 2…

Brand: TERACOM

frient IO Module Smart Zigbee Input Output Module Instruction Manual

August 8, 2023

frient IO Module Smart Zigbee Input Output Module Product Information The IO Module is a device that allows for the control and integration of various electrical and electronic devices. It supports multiple languages including Danish (DA), Swedish (SE), German (DE),…

Brand: Frient

frient IO Module Smart Zigbee Input Output Instruction Manual

August 8, 2023

IO ModuleINSTALLATION MANUAL Version 1.0 Product description With the IO Module, you can connect wired devices to a Zigbee network. Providing four inputs and two outputs, the IO Module works as a bridge between wired devices and a control system…

Brand: Frient