Intercom Beltpack Manuals & User Guides

Studio Technologies 370A Intercom Beltpack Product Information Specifications Model: 370A Type: Intercom Beltpack Serial Numbers: M370A-04501 and later Firmware: 2.1 and later Material: Aluminum alloy enclosure with stainless steel belt clip Audio Quality: Low distortion, low noise, high headroom Applications:…

Model 372A Intercom Beltpack User Guide Issue 2, June 2023 This User Guide is applicable for serial numbers M372A-00151 and later with application firmware 2.1 and later Copyright © 2023 by Studio Technologies, Inc., all rights reserved studio-tech.com Revision History…

Studio 374A Intercom Beltpack Product Information Specifications Serial Numbers: M374A-04001 to 04500 Application Firmware: 2.1 and later Power Requirement: Power-over-Ethernet (PoE) Operating Parameters: Configurable using the STcontroller software application Audio Channels: 4 Enclosure: Aluminum alloy Belt Clip: Stainless steel Introduction…

    IPB Intercom Beltpack Instruction Manual     INTRODUCTION Thank you for choosing this intercom product. BK-101 is a new design belt pack with plastic case. It can work with IMS Intercom Master station. This belt pack adopts wired…

Model 373A Intercom Beltpack User Guide Issue 1, April 2019 This User Guide is applicable for serial numbers M373A-00151 and later with application firmware 1.1 and later Copyright © 2019 by Studio Technologies, Inc., all rights reserved www.studio-tech.com  50693-0419, Issue…

STUDIO TECHNOLOGIES 374A Intercom Beltpack User Guide Introduction The Model 374A Intercom Beltpack begins with the features offered by traditional party-line intercom user devices and adds a range of new capabilities along with the advanced performance and flexibility that Dante®…