Easy Connect Harness Manuals / Datasheets / Instructions

OPT7 Redline Easy Connect Harness Instruction Manual

REDLINE EASY CONNECT EXPANSION ADAPTER FOR FORD F150 ALL MODELS 2015-2020 WITH BLIS/BACKUP CAMERA/ASSIST SENSOR Hello Fellow OPT7-ites, Introducing the Redline Easy Connect Harness to Flat 4-Pin Extension Adapter Harness OPT7 Redline Easy Connect Harness Installation Open up your tailgate first. Next, locate the two bolts that lock the tail light (See Figure 1) and loosen them. Slowly move the loose tail light until it is completely removed(See Figure 2). Important There are two plastic clips on the inside of the tail light for fixing, please be careful not to break it when removing it. Locate the OEM wiring harness (See Figure 3) and unplug it from the tail light assembly by lightly pressing the Release-Latch on the connector. HOW TO CONNECT PNP EXPANSION ADAPTER TO YOUR TAILLIGHTS Step 4 To make it easier for you to identify the signal location represented by the Connector/Wiring. Please read the relevant wiring instructions carefully before commencing any work.(See Figure 4) Next, grab the Redline Easy Connect Expansion Adapter Harness and Plug it into the vehicle’s OEM wiring harness. Plug the other end into the tail light connector (See Figure 5). Route the Redline Easy Connect Expansion Adapter Harness from the left tail light opening to the right tail light opening, then repeat the same steps for the other side. Step 6 Use some zip ties to secure the flat 4PIN trailer connector and reverse wire in place along the inner bumper. Step 7 Finally, connect the available tailgate light bar to the 4PIN trailer connector and reverse wire for full functionality testing DISCLAIMER OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance. OPT7 recommends installation for safety and guidance. Modified installations or installation recommendations not specified by OPT7 Lighting will void product warranty.

Discover the OPT7 Redline Easy Connect Harness designed as an expansion adapter for Ford F150 2015-2020 models with BLIS/Backup Camera/Assist Sensor. Follow user-friendly installation instructions for seamless integration without cutting or splicing factory harnesses. Opt for hassle-free setup and ensure compatibility with this innovative trailer accessory.