Development Kit Manuals & User Guides

SILICON LABS Si1140-DK Optical Sensor Development Kit User Guide

December 12, 2022

SILICON LABS Si1140-DK Optical Sensor Development Kit Introduction The Si1140DK is intended as an evaluation and development platform for the Si1143 infrared proximity and ambient light sensor. As shown in Figure 1, the main components of the Si1143 Evaluation Board…

Brand: SILICON LABS

Thundercomm TurboX C2290, CM2290 Development Kit User Guide

December 7, 2022

Thundercomm TurboX C2290, CM2290 Development Kit Package List NOTE: All parts are included in advanced DK package. Parts marked are not included in standard DK package. Interface List 1. Power on button 14.SIM card slot 2 27.NA 2. Volume down…

Brand: Thundercomm

LEGIC XDK110 Cross Domain Development Kit User Guide

December 6, 2022

LEGIC XDK110 Cross Domain Development Kit First: The LEGIC Cross Domain Development Kit is a universal programmable multiple sensor device for prototypical applications and long term use for low volume productions. Overview Intended Use of XDK 110 The XDK 110…

Brand: LEGIC

Thundercomm TurboX C2210 Development Kit User Guide

December 6, 2022

Thundercomm TurboX C2210 Development Kit Package List NOTE: All parts are included in the advanced DK package. Parts marked * are not included in the standard DK package. Interface List 1. Power on button 14. NA * 27. NA *…

Brand: Thundercomm

Thundercomm D660 TurboX Development Kit User Guide

December 6, 2022

Thundercomm D660 TurboX Development Kit Development Kit Interface List 1. Internal codec (PM660L) receiver 13.Camera connector 2 25.Micro USB connector 2. External codec connector 14.Camera connector 3 26.Battery plus-n-minus connector 3. Digital microphone array 1 15.Light/proximity sensor 27.Power button 4.…

Brand: Thundercomm

Thundercomm C6490 Development Kit User Guide

December 6, 2022

Thundercomm C6490 Development Kit User Guide Rev. V1.0 DN: tc-x1-2110   Package List   Main Board Interface List a) Only HS 2.0 signal is available on C6490 SOM. b)C6490 USB0 is a complete Type-C port. By default, USB3900 is not…

Brand: Thundercomm

Telit EVB IoT Device Development Kit User Guide

December 3, 2022

Telit EVB IoT Device Development Kit ' This Quick Start Guide will walk you through the easy steps required to setup the evaluation board for your wireless application. The EVB is a tool designed for engineers, programmers and developers allowing…

Brand: Telit

Thundercomm CM6125 Turbox Development Kit User Guide

November 30, 2022

Thundercomm CM6125 Turbox Development Kit User Guide Package List Interface List 1. Type-C USB 3.1 connector 1 (for adb debug) 13.Fan connector 25.HDMI in connector 2. Speaker connector 14.Type-A USB 3.1 connector 26.Switch 2 3. Headset connector 15.Type-C USB 3.1…

Brand: Thundercomm

M5STACK ATOMS3 Development Kit User Manual

November 27, 2022

ATOMS3 Development Kit User Manual Outline AtomS3 is a development board based on the ESP32-S3 chip and includes a 0.85 "TFT screen. The board is equipped with two buttons and USB-C ports, in addition to WS2812LED and 2.4g antenna. 1.1…

Brand: M5STACK

Thundercomm TurboX CM4290 Development Kit User Guide

November 23, 2022

Thundercomm TurboX CM4290 Development Kit Package List Interface List 1.      UART debug connector 11.PCIE connector * 21.SIM card slot 1 ** 31.Volume up button 2.      USB 3.1 Type-A connector 12.SW 1300 22.SOM plate 32.Volume down button 3.      Micro USB connector…

Brand: Thundercomm