Communication Gateway Manuals & User Guides

ELECROW ThinkNode M7 LoRaWAN Wireless Communication Gateway User Manual

July 20, 2026

ELECROW ThinkNode M7 LoRaWAN Wireless Communication Gateway Troubleshooting Gateway does not appear to enter configuration mode: If no saved configuration exists, the device enters configuration mode automatically on power-on. To reconfigure at any time, long-press the Reload button for 5…

Brand: ELECROW

ThinkNode M7 LoraWAN Wireless Communication Gateway User Manual

July 14, 2026

Quick Start Guide for ThinkNode M7 Scan the QR code to access product manuals and technical support. ThinkNode M7 (Meshtastic)     FCC ID:2BDNA-TNM7 Device Part Reload Button USB-5V (Console) Ethernet Port (10Mbps/100Mbps) LINK Status LED BT/LoRa Status LED PWR…

Brand: ThinkNode

AKO 5021H002 Edge Communication Gateway Instruction Manual

May 6, 2026

AKO 5021H002 Edge Communication Gateway Technical Specifications Power Supply 85 - 264 V ~ / 47 - 63 Hz Maximum Consumption 10VA Communications WIFI (802.11 b/g/n, 2.4 GHz), Ethernet Port 10/100 Mbps, RS 485 9600, Quad-band GSM/GPRS (850/900/1800/1900 MHz) Antenna…

Brand: AKO

AKO 5025H002 XaviP Edge Communication Gateway Instruction Manual

May 6, 2026

AKO 5025H002 XaviP Edge Communication Gateway Instruction Manual AKO XaviP EDGE AKO-5010 / AKO-5025 Warnings If the device is used without adhering to the manufacturer's instructions, the device safety requirements could be compromised.Only probes supplied by AKO should be used…

Brand: AKO

AKO Electromec nica S A 5041H002 XaviP Edge Communication Gateway Instruction Manual

May 6, 2026

AKO Electromec nica S A 5041H002 XaviP Edge Communication Gateway Instruction Manual AKO-5041 AKO XaviP EDGE Warnings If the device is used without adhering to the manufacturer's instructions, the device safety requirements could be compromised. Only probes supplied by AKO…

Brand: AKO Electromec nica S A

AKO 5051H002 XaviP Egde Communication Gateway Instruction Manual

May 6, 2026

AKO 5051H002 XaviP Egde Communication Gateway Instruction Manual   Warnings If the device is used without adhering to the manufacturer's instructions, the device safety requirements could be compromised. Only probes supplied by AKO should be used for the appliance to…

Brand: AKO

InSynerger INS-LGW-100 Wireless Communication Gateway User Manual

January 6, 2026

InSynerger INS-LGW-100 Wireless Communication Gateway Product Usage Instructions If any items are missing or damaged, contact your distributor or sales representative immediately. The User's Manual contains detailed information on the product's hardware and software features, specifications, dimensions, jumper/connector settings, and…

Brand: InSynerger

AKO 5041H002 Xavip Edge Communication Gateway Instructions

December 9, 2025

AKO 5041H002 Xavip Edge Communication Gateway Instructions Warnings If the device is used without adhering to the manufacturer's instructions, the device safety requirements could be compromised. Only probes supplied by AKO should be used for the appliance to operate correctly.…

Brand: AKO

AKO-5041 AKO XaviP EDGE Communication Gateway Instructions

October 22, 2025

5041H002 Ed.06 en Instructions AKO-5041 AKO XaviP EDGE Indicators (Wait between 3 and 4 minutes after start-up for indicators to show their real status) Flashing red: Indicates RS485 communication (MODBUS) (Tx). Flashing green: Indicates RS485 communication (MODBUS) (Rx). Flashing blue:…

Brand: AKO

FLO Communication Gateway Instruction Manual

June 21, 2025

FLO Communication Gateway Product Information Specifications Product Name: Communication Gateway Communication Protocols: Zigbee (IEEE 802.15.4), Cellular (LTE), Ethernet (LAN) Compatibility: EV chargers and CPO backend Network Connectivity: Bidirectional communication Product Usage Instructions Installation Follow the steps below to install the…

Brand: flo