Ceiling Mounted Light Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Ceiling Mounted Light products.

Tip: include the full model number printed on your Ceiling Mounted Light label for the best match.

Ceiling Mounted Light manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

GLOBO 16062H Ceiling Mounted Light User Manual

April 4, 2026
GLOBO 16062H Ceiling Mounted Light Specifications Power 10W LED 36V Voltage 220-240V~ 50/60Hz Roller Tightness Adjustment Tighten Loosen If the roller cannot work well, please adjust it. Light Source Light source: The light source is not interchangeable because it is…

TPC L690-LED Lucent LED Ceiling Mounted Light User Manual

January 25, 2026
TPC L690-LED Lucent LED Ceiling Mounted Light GENERAL INFORMATION SYMBOLS DANGER The paragraphs marked with this symbol contain instructions that must be followed carefully to avoid damaging the device, the operator, and the patient. ⚠WARNINGS These instructions warn the operator…

SLV 1007604 Ceiling Mounted Light Instruction Manual

January 15, 2024
SLV 1007604 Ceiling Mounted Light Product Information General Information Protection Class: IP44 Operating Temperature Range: -20°C to +40°C Electrical Specifications: 220V-240V ~ 50/60Hz Lamp Type: LED E14 Maximum Wattage: 6W Fixture Dimensions: Ƙ 12 x 17.8 cm Weight: 0.52 kg…

BOCCI 84.6V Stem Ceiling Mounted Light Instruction Manual

February 6, 2023
BOCCI 84.6V Stem Ceiling Mounted Light Dimension approx 14.5kg (32lb) SPECIFICATION PENDANTS: six MOUNTING: 142mm (5.6ā€) x 35mm (1.38ā€) LAMPING: 1.5w LED STEM LENGTH 1.8m (6’) long stem ADDITIONAL 153mm (6ā€) / 305mm (12ā€) / 914mm (36ā€) / EXTENDERS 1524mm…

midmark 255 Ceiling Mounted Light Installation Guide

December 22, 2022
midmark 255 Ceiling Mounted Light 255 Ceiling Mounted Light Installation Note Installation requirements may vary the dimensions. Step 1: Determine mounting location. Use the weight / dimension information shown on this page to determine the mounting location. Note: Power source…