Bender Manuals & User Guides

VEVOR SBG-40 Bender Instructions

September 22, 2026

VEVOR SBG-40 Bender SPECIFICATIONS Model PR-3 Maximum bending width 10mm Maximum bending thickness Low carbon steel: 8mm; Aluminum: 12mm Maximum bending angle 360° Bending strength: 28-1/2 Tons per square inch (4.42T) Flat Maximum Capacities(Steel & iron): 5/8" Round stock(16mm) 1/2"…

Brand: VEVOR

VEVOR SS-18 Bender Instructions

September 22, 2026

VEVOR SS-18 Bender INTRODUCTION This is the original instruction; please read all manual instructions carefully before operating. VEVOR reserves the right to interpret our user manual. The appearance of the product shall be subject to the product you received. Please…

Brand: VEVOR

VEVOR CT-612 180° Tube Bender Instructions

September 22, 2026

VEVOR CT-612 180° Tube Bender This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.…

Brand: VEVOR

VEVOR MR8080 , MR8081 Bender Instructions

September 22, 2026

VEVOR MR8080 , MR8081 Bender Overview This pipe bender is designed to bend water pipe, rigid conduit, heavy-gauge galvanized pipe used in commercial applications, and other similar pipe types. Specifications Model Maximum Load Maximum Pipe Diameter Pipe Wall Thickness MR8080…

Brand: VEVOR

VEVOR TB-3 Bender Instructions

September 22, 2026

VEVOR TB-3 Bender Overview The BENDER TB-3 is a manual, floor-standing cold tube bender that uses a flexible segmented mandrel to help prevent tube flattening, wrinkling, and collapse during bending. It features a precision angle dial and three sets of…

Brand: VEVOR

VEVOR YP9 Bender Instruction Manual

September 22, 2026

VEVOR YP9 Bender Overview The BENDER compact bender (Models YP9/YP38) is designed for bending up to 5/8 round or square bar, and 5/16 x 2 flat stock, using appropriate dies/molds. Specifications Model Maximum bending width Maximum bending thickness Maximum bending…

Brand: VEVOR

VEVOR SWG-1 Manual Pipe Bender Instruction Manual

September 22, 2026

VEVOR SWG-1 Manual Pipe Bender Quick Setup & Use Wear safety glasses and gloves before using the Manual Pipe Bender. Use the pipe with the corresponding specification of the mold. Keep the mold equipped with the machine in proper condition…

Brand: VEVOR

VEVOR SWG-25 Pipe Bender Instruction Manual

September 22, 2026

VEVOR SWG-25 Pipe Bender Specifications   Model   Pipe outer dia. Wall thickness of pipe   Bender angle   Bender radii   SWG-25   10~25mm   ≤2mm   ≤180°     4D Note on molds/top model: The manual instructs you…

Brand: VEVOR

VEVOR CT-S999F Pipe Bender Instruction Manual

September 22, 2026

VEVOR CT-S999F Pipe Bender Introduction This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.…

Brand: VEVOR

VEVOR TR60A Bender Instruction Manual

September 18, 2026

VEVOR TR60A Bender SPECIFICATIONS Model TR60A Maximum bending width 40mm Maximum bending thickness Low carbon steel: 2mm; Aluminum: 4mm Maximum bending angle 360° BENDER This is the original instruction; please read all manual instructions carefully before operating. VEVOR reserves a…

Brand: VEVOR

Bender EDS151 Insulation Fault Locator Manual

manual • May 30, 2026

Technical manual for the Bender EDS151 insulation fault locator. Includes installation, wiring, commissioning, and technical specifications for medical IT systems.

Brand: Bender

Bender ISOSCAN® EDS440 and EDS441: Insulation Fault Locators for Ungrounded Power Supplies

manual • April 17, 2026

Comprehensive guide to Bender's ISOSCAN® EDS440 and EDS441 insulation fault locators, designed for detecting faults in ungrounded DC, AC, and three-phase power systems. Details features, installation, operation, and technical specifications.

Brand: Bender

BENDER COMTRAXX® CP305 Control Panel - Technical Specification

Technical Specification • February 24, 2026

Comprehensive technical specification for the BENDER COMTRAXX® CP305 Control Panel, a versatile alarm and monitoring combination designed for medical and other critical environments. Details features, functions, technical data, and connection diagrams.

Brand: BENDER

ISOMETER® isoNAV685-D: Handbuch für Isolationsüberwachungsgeräte

Manual • February 7, 2026

Umfassendes Handbuch für das ISOMETER® isoNAV685-D Isolationsüberwachungsgerät von BENDER. Enthält technische Daten, Installationsanleitungen, Sicherheitsinformationen und Bedienungsanleitungen für IT-Wechselspannungssysteme.

Brand: BENDER

ISOMETER® isoNAV685-D Insulation Monitoring Device User Manual

User Manual • February 7, 2026

This user manual provides comprehensive information on the BENDER ISOMETER® isoNAV685-D, an advanced insulation monitoring device designed for IT AC systems. It covers installation, operation, features, and technical specifications for ensuring electrical safety in systems with galvanically connected rectifiers and inverters.

Brand: BENDER

BENDER ISOMETER® isoNAV685-D-B: Handbuch zur Isolationsüberwachung

Manual • February 7, 2026

Umfassendes Handbuch für das BENDER ISOMETER® isoNAV685-D-B Isolationsüberwachungsgerät. Erfahren Sie mehr über Installation, Funktion, technische Daten und sichere Anwendung in IT-Systemen.

Brand: BENDER

Bender ISOMETER® isoHR685W-D-I-B / isoHR685W-S-I-B Handbuch

Manual • February 7, 2026

Umfassendes Handbuch für das Bender ISOMETER® Isolationsüberwachungsgerät (Modelle isoHR685W-D-I-B und isoHR685W-S-I-B). Erfahren Sie mehr über Installation, Betrieb, technische Daten und Sicherheitsfunktionen für IT-Systeme.

Brand: BENDER

ISOMETER® iso415R-1 Insulation Monitoring Device - Quick Start Guide | BENDER

Quick start guide • February 7, 2026

Quick start guide for the BENDER ISOMETER® iso415R-1, an insulation monitoring device for unearthed 3(N)AC, AC, and DC systems (IT systems). Includes technical data, connection diagrams, and configuration instructions.

Brand: BENDER

Bender LINETRAXX CTUB100 Series All-Current Sensitive Residual Current Transformers (Type B) - Technical Data and Manual

Technical Specification • February 7, 2026

Detailed technical specifications, installation guide, and operational information for the Bender LINETRAXX CTUB100 series of all-current sensitive residual current transformers (Type B), designed for detecting residual currents in AC, DC, and 3(N)AC systems.

Brand: BENDER

LINETRAXX® CTUB100 Series AC/DC Sensitive Measuring Current Transformers - Technical Specification

Technical Specification • February 7, 2026

Comprehensive technical specification for the BENDER LINETRAXX® CTUB100 series AC/DC sensitive measuring current transformers, covering intended use, features, installation, technical data, and ordering information.

Brand: BENDER

Bender GFGC Protection Panel Datasheet: Universal Zero-Sequence Current and Loop Monitoring

Datasheet • February 7, 2026

Datasheet for the Bender GFGC Protection Panel, a universal zero-sequence current and loop monitoring panel designed for 120 VAC to 600 VAC grounded systems. Features include residual current detection, loop monitoring, and automatic power interruption.

Brand: BENDER

LINETRAXX® Série CTUB100 : Transformateurs de Courant de Mesure Sensibles Tous Courants (Type B)

Technical Specification • February 7, 2026

Spécifications techniques détaillées et informations produit pour la série BENDER LINETRAXX® CTUB100 de transformateurs de courant de mesure sensibles tous courants (Type B), incluant variantes, données techniques et instructions d'installation.

Brand: BENDER